The Windows Firewall service is stopped

Similar Questions

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• I can not start the Windows Firewall service in Windows XP SP3

  I discovered this problem when I installed a new Brother MFC-7860 DW in my network. Although the computer can 'see' the machine, I can't print to it. The error coming from the troubleshooter has informed me that the firewall might be the problem. Now I find that I couldn't open the firewall. I tried the solutions in previous discussions. It seems that Windows Firewall is not yet installed on my machine even if the icons are in the control panel. When I tried MS Fixit for the firewall, it gave me an error and sent me to a web page that does not seem to address the situation. Help, please.

  Now I find that I couldn't open the firewall. I tried the solutions in previous discussions. It seems that Windows Firewall is not yet installed on my machine even if the icons are in the control panel. When I tried MS Fixit for the firewall, it gave me an error and sent me to a web page that does not seem to address the situation. Help, please.

  (1) you have a third-party security software installed?
  This could be due to that... What are the analyses of different viruses that you already have... It may be a product of firewall or security of third parties that interfere the windows firewall, disable one by one your security scanners and try for windows firewall

  (2)if you do not have these installed firewall products, this could be due to malicious software or some other problem...

  If you have an antivirus up to date solution its definitions and do a full scan of the system...

  If you do not have an antivirus solution, or one does not work, use one of the recommended tools (use only one at a time)

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  And/or
  http://www.Malwarebytes.org/products/malwarebytes_pro/
  And/or
  http://www.simplysup.com/tremover/download.html (shareware)
  And/or
  http://www.McAfee.com/us/downloads/free-tools/Stinger.aspx
  And/or
  http://www.Kaspersky.com/free-virus-removal-tool

  If this also isn't that the problem may be that your firewall service is damaged...
  
  (3) open a command prompt run as administrator and type sfc/scannow

  (4) try to fix the firewall service
  Run the tool repair services by ESET
  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe

  
  And/or
  Download and add this firewall Windows registry entry - download.bleepingcomputer.com/win-services/7/MpsSvc.reg
  (If you find difficulties to add to the registry to refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html)

  And/or
  Open a command prompt using run as administrator
  and copy - paste these
  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
  and press enter

  And/or
  Download this file and added to the registry by double clicking on it
  https://www.dropbox.com/s/ozezmcs3nktc2s0/windowsxp_firewall_fix.reg
  (5)guest orders (run as administrator), type Netsh firewall reset , and press "enter."

• How can I find and add the Windows firewall service on my WIN7Pro 32 bit?

  After you remove a virus my firewall stopped responding and it does not appear in the services. What can I do to fix this?

  After you remove a virus my firewall stopped responding and it does not appear in the services. What can I do to fix this?

  (1) open a command prompt using run as administrator

  and copy - paste these

  rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 netrass.inf

  and press enter

  (2) prompt (run as administrator), type "netsh firewall reset", press "enter".

  Other useful links for Firewall service repair

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/2679690e-C375-4232-AE45-404374386635

  http://support.Microsoft.com/kb/2530126

• Could not start the Windows Firewall service, missing dependency services

  Hello Dustin,.

  I suggest the steps after booting in safe mode and make sure you copy the entire command from "Windows Registry Editor Version 5.00".

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Please come back after you have tried the above suggestions.

  Hi, well I thank you that I was finally able to get my BFE run on my computer.  Now, I will try to get my firewall up.

  Thank you once again the copy and paste work.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Error message on the Firewall - error 0 x 80070422 in trying to restore the full security of the Windows Firewall

  Windows Firewall disabled when change/addition of software - ordered to do.   Now I get an error message when you try to restore full security of firewall:

  Error message 0 x 80070422

  How can I repair, restore the firewall?

  Hello

  I suggest the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:
  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center;
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-security-and-safe-computing

  I also suggest you go to services and start the Windows Firewall service and the service of windows defender to automatic. To do so follow the steps below:

  Click Start > type services.msc in the serach box > go to services and start the Windows Firewall service and the service of windows defender to automatic.

   
   

• I have a problem with the Windows Firewall.

  Original title: Firewall Windows does nothing, any ideas please error due to unidentified problem window

  I have windows xp sp3 with internet explore 8 and windows firewall when you press says in a window because of unidentified problem, Windows cannot display Windows settiings firewall.

  Hello

  This problem is caused by a missing or corrupted SharedAccess.reg file. The SharedAccess.reg file represents the Windows Firewall service.

  1. you have any other firewall software or security running on the computer?

  2. have there been recent changes to the computer before the show?

  I suggest to try the steps provided and check if they help to resolve the issue.

  Method 1: Diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2: You cannot start the Windows Firewall service in Windows XP: http://support.microsoft.com/kb/920074

  Method important this section, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Cannot access the Windows Firewall

  The thing is I did an ad hoc network with my dads laptop computer and it seems that I have to use Windows Firewall to enable ICS but every time I click on "change firewall settings a dialog box saying: Windows Firewall settings cannot be displayed because the associated service is not running." You want to start Windows Firewall/Internet Connection Sharing (ICS)?
  Yes/No

  After I clicked on yes I get another dialog box saying: due to a problem not identified, Windows cannot display Windows Firewall settings.
  Ok

  I have no idea on what to do. Can anyone help?

  Hi Mawuko wassel,

  ·         Do you have any other firewall software or security running on the computer?

  ·         Did you do changes on the computer before the show?

  You can reset the firewall and then search for the question.

  a. click Start, click run, type cmdand then click OK.

  b. at the command prompt, type the following command and press ENTER:

  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

  c. restart Windows,

  d. click Start, click run, type cmdand then click OK.

  e. at the command prompt, type the following command and press ENTER:

  Netsh firewall reset

  f. click Start, click run, type firewall.cpland then press ENTER. In the Windows Firewall dialog box, click on (recommended), and then click OK.

  You can also view the article in the knowledge base Microsoft for more information:

   

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

   

  Hope this information helps.

• Could not start the Windows Firewall

  De :  Johan

  Hello

  My firewall gives me this error message when I try to put it on.

  "Windows cannot start the Windows Firewall service.

  I just installed SP1, but the problem started before that.

  De :  GTS

   

  Try running this command at a netsh winsock reset command prompt

  Restart, and then try to turn on the firewall.  Recently, it has worked for me during the interview of a machine of customers with the same problem.

  Another response of the community of Windows Vista discussion groups