The Windows program compatibility

Similar Questions

• Quicken - the installation program must be started by the Windows program manager

  I used the special edition of Quicken 2002 on multiple computers - which this one with Vista for 3-4 years.  I accidentally deleted and tried to reinstall it.  Using the installation application, the system makes the installshield, then stops and says "this program must be launched by the Windows program manager."

  Any ideas?  Thank you!

  You say that it works OK.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=Quicken%202002&v=Intuit&UID=&PF=5&PI=9&c=business%20%26%20Home%20Office&SC=small%20Business&OS=32-bit

  But read the above.

  I suggest you contact Quicken.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center.

  I won't be here but Microsoft seems very happy sending me on the prosecution of the wild goose, and here I landed! I didn't even know that Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center. The first, in the Windows help sent me to http://windows.microsoft.com/en-us/windows/support#1TC=windows-7. Not a mention of the word "compatibility" on the page anywhere. Then, enter 'compatibility' in the search for support and here is the result, looks promising. https://www.microsoft.com/en-us/search/result.aspx?q=compatibility. But no, I click on the first result that says Microsoft compatibility Center. Even what seems to be the correct web address, microsoft.com /compatibility and it takes me here http://www.microsoft.com/microsoft-band/en-us/support/hardware/microsoft-band-system-requirements. I give up!

  Hi André,.

  Please keep us updated.

  Unfortunately, the center of compatibility Windows has actually retired. To find out if any program that works with Windows 10 or not, you can check with the developer to program on the compatibility of its operating system. In addition, when you migrate to Windows 10 from a previous version of Windows, you are informed about programs that may not work with Windows 10. However, you can try to install these programs in compatibility mode and check.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Details pane has suddenly appeared in the window programs and features, when it had not appeared there before.

  I have a strange problem.  When I first installed Windows Vista Home P. 32-bit program and features or uninstall a program window did not have a details pane; It was the only window that did not have.  One day, he showed no reason and now it will not disappear. The window workstation and others have had the part, but not the window programs and features.  If I try to disable the window pane programs and features disables it for all windows operating system.  Anyone know how this can be reversed or where the value for this is held in the registry?

  I'm going crazy!

  Thank you.

  Do the opposite

  http://www.askvg.com/how-to-re-enable-missing-details-pane-in-Windows-Vista-Explorer/

• Win7 PRO update - to get the Windows XP Compatibility Mode = No. WORKY!

  I bought a fairly expensive system, it comes w / no NEED Win7 HOME edition-paid the cost of upgrade ridiculous just so that I could have programs Windows XP compatibility because NONE of the programs my WinXP Pro embarks on this edition of Crapola from windoze to find that you have to DOWNLOAD.

  Pleasant for people who must pay for their bandwidth because they have satellite systems because * NEWSFLASH to MICROSOFT * broadband high speed is not available nationwide!

  Thus, after 6 DOWNLOADS of the Retarded _ "prove it is a true copy of Windoze ' message - he FINALLY admits that ' Yes, I really waste my money on this _ rather than buy a REAL operating system! and sends me to the download link (FINALLY).

  So, I try to download this _ any way & it starts to download, 4 HOURS later I get:

  C:\Downloads\WindowsXPMode_en-US.exe could not be saved because the source file could not be read.

  Try again later or contact the server administrator.

  different 3 times, I received this after 17 HOURS TOTAL of download.

  So I send a message to 'Technical Support' where I said that I have to wait 24 hours for a bloody response. NICE. REALLY GOOD.

  Why the _ is not only included on the stupid Win 7 DISC? As you know GD although normal programs will not work win 7! ???

  Someone at - it a number of telephone CONTACT for WINDOZE? I am so sick of dressing - I have a business to run and it gets OLD very fast.

  Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr...

  WishIbottaMAC,

  This site has comprehensive contact information available.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems installing of printer in the Windows XP compatibility box

  I am trying to use my printer Canon MX870 Windows XP compatibility mode. In the compatibility window is my computer has no printer, and apparently no USB ports don't either.

  When I try to print from a program that is running in compatibility mode, I get an error box that says: no printer driver is installed.

  I found an MS article that says I should choose the Windows XP desktop tools > parameters command and check the printer in the menu of the integration features. I tried and found that printer is already checked.

  I tried to install a separate printer driver compatibility window and had no luck there either. The "Add a printer" Wizard has informed me that there is no plug-and-play printer connected to the computer. When I tried to install the printer manually, I found that none of my USB ports have been listed as locations.

  My computer has eight USB ports, an RS-232 port and a parallel port. The Wizard indicates that it is three parallel ports, 4 serial ports and seven ports 'TS' appointed TS001, TS002, etc., of which the last is "inactive".

  I don't know how to make the link between these imaginary ports of Windows XP for real hardware in my computer. (If I did, I would still need to know which one to use. I know, but Windows is supposed to automatically allocate the names of devices on the USB ports that is appropriate, in view of these problems, I am not prepared to assume that it will be).

  How can I handle this? All this seems to be a mess.

  Hello

  
  To work around the problem, try the following steps if you have this driver on the XP Mode desktop file.

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file you have on the desktop XP mode, then click OK. Now, check if the printer is correctly installed.

  You can even provide the driver through a disk file if you do not have internet access to download the file via the XP mode.

  Alternatively, you can check the link for more information below:

  
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://blogs.technet.com/b/windows_vpc/archive/2009/09/26/networking-and-using-Windows-XP-mode.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Can I use the windows program 7, which originally of a portable scrapped to install on your new pc

  Hello.

  I've seen an Acer apspire laptop come with Windows 7 Home premium 64-bit.

  Recently, my laptop found having problem.

  I intend to buy a desk, but no Windows operating system inside.

  Can I transfer my Windows 7 Home premium 64-bit, which I copied computer Acer laptop (using 3 recovery disk) in this new desktop CPU can work and at the same time it contravenes to the issuance of software license?

  Thanks for your response in advance.

  I hope that a moderator will come along and move this question in the Windows 7 forum (you asked for it in the XP forum).

  To answer the question in any case, the answer is that what you want is legally impossible (oem licenses are tied to the original computer and AFAIK all Acer licenses are oem). She is also almost certainly impossible technically too (due to physical differences).

  Tricky

• make the partition without formatting drive and made game like left4dead affecting the windows program?

  When I play left4dead, it freezes and stop smoking... I ask some friend they said I should do a partition because it affects the program.some of windows told me that the video card is low... I have an acer aspire 4741, graphics card intel HD up to 762 MD DVMT and 320 HARD drive and there is no partition... is not enough to have a gudtime to kill the zombies?

  Thank you...

  Hi dand0y,

  1 when was the last time it was working fine?

  2. you receive an error message?

  In most of the released games are caused due to corrupt or outdated video card drivers.

  Method 1

  I suggest that you visit the video card manufacturer's website download and install latest driver package control if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  Intel® graphics performance analyzers to check the performance of the game.

  http://software.Intel.com/en-us/articles/Intel-graphics-performance-analyzers-quick-start-guide/

  For more information send your query on the site of the game.

  https://support.steampowered.com/

  http://store.steampowered.com/forums/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Disable the window "program does not.

  I have a problem for Windows 7 running a previous custom program.  I have a touch screen program that is running in a public space.  When the user quickly touch the screen more quickly that the program can meet a "x program has stopped responding" window opens. The user is then given the option to wait (good choice) or end of program (bad choice).  Is there a way to disable this popup, disable the option "end of program" or automatically choose the option 'wait '?

  Thank you!

  If she's not here, he's just going with the default value of 5 seconds.  You can create this value and set it to your liking.  Right click on a box blank and choose "new / string value.  Call it as 'HungAppTimeout '.  Double-click it, and then set it to the length you prefer.  It is in milliseconds, so if you want to wait 30 seconds before considering an application to be hung, set to 30000.

• iTunes problem, when you start the Windows program "a problem" and asked for a report to be sent, then closes

  I downloaded the latest version of iTunes (11.2.2.) it opens but does not play my music, don't download or burn CDs, or allow access to the iTunes Store because Windows 'a problem' and request a report to send, then closes.  So, I use of course, that the report is now ignored by Windows because they are more concerned with XP Windows XP Home Edition.  It of a Windows problem or is this a problem iTunes... .to someone at - it a solution?

  You need to move to an operating system that is supported (see the risk of Running Windows XP after support ends April 2014), but Apple says iTunes works with XP service pack 3:

  

• The Prime Minister installed and not in the Windows programs list

  My company gave me a license key for first pro for video editing. I installed using creative cloud. He appears in [Control Panel uninstall files], but is not in my list of Windows 7 program, under Start menu?

  How can I fix, Google returns no similar questions.

  you run windows 7 32-bit or 64-bit? first only installs and runs on 64-bit.

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• I'm trying to run a game in windows 95 compatibility mode, but the compatibility under Properties tab disappeared.

  I am running windows 7 Professional. It is not the version of upgrade.

  Hi Tippo_89,

  Welcome to the Microsoft Answers site!

  (1) have you been able to use the compatibility feature earlier?

  Try the steps below and see if you can run the program.

  To run the troubleshooting program compatibility Troubleshooter

  (1) open the resolution of the problems of compatibility of programs by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  (2) follow the instructions contained in the resolution of the problems.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  Access the link below for more information on the steps below.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know of any other help

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file. Error 105

  I am trying to install a HP printer.  When I run the setup.exe and click the install, I get the message:

  Setup initialization error

  The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file.

  Error 105

  When I do a search for the error message I get no results.  So I ask the community if there is a fix or work around this issue.

  Hello

  What version of windows you are using?

  The program is not compatible with your version

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the troubleshooting program compatibility Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. Follow the instructions contained in the resolution of the problems.

• Is it legal to use any Windows programs under Linux using Wine as long as the programs are free initially, like Windows Live products?

  original title: is it legal?

  I read on Internet that Linux users can download and run official Windows software on their computer using a program called wine.
  If the Windows program they want to run is something that is free, is Live Photo Gallery or Windows Live Movie Maker legal to use with the demand for wine?
  Thanks for your time!

  Yes, perfectly legal, if it wasn't, I don't know that Microsoft would have to stop them. If you spent $500, you are free to install it on the operating system of your choice, although versions recent Office 2010 and 2007 version and software such as Windows Live Essentials won't probably wine.

  Check out the following experiment using WINE and Windows on Linux applications:

  http://www.PCWorld.com/businesscenter/article/231065-2/ubuntu_linux_day_23_would_you_like_some_wine_with_that.html