The woes of restoration: the system is a hypocrite!

Similar Questions

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.

• How can I find downloaded emails that disappeared after the system restore function?

  I restored Ubuntu 14.10 at an earlier date, but the previously downloaded emails since my online account after the restored date disappeared. Where can I find them? Data is backed up on a weekly basis.

  I have no idea, I suggest you to ask what you actually do on a forum of Ubuntu Linux. My guess is that you have completely replaced the files with the 'old', so the data are missing. Long experience which is anything "System Restore" or "system reset" will lead to nothing other than high blood pressure, gnashing of teeth and the loss data.

  If you happen to find a latest version of your profile files, the information here should help. https://support.Mozilla.org/en-us/KB/Profiles-TB#w_where-is-my-profile-storedUbuntu

• I clicked "forget this site", I can cancel it by running the "System Restore" function to retrieve my story?

  I clicked "forget this site" and I am looking for a way to undo it. I have heard say there is no way to retrieve the history of a particular site, once it has been deleted, but surely, it leaves some kind of record in the system? I read an article that suggested running the "System Restore" feature which gives me the option to "restore my computer to an earlier time" before that some changes have been made. Would this work?

  Hello, windows system restore will not restore the file that contains the history of firefox unfortunately (it's called places.sqlite). you would need a backup of your firefox profile folder to retrieve such data.

  Please also update firefox - the version that you are currently using is outdated and affected by many security vulnerabilities.

  Update to the latest version of Firefox

• Hall 20: I can't do a system restore to overcome the refusal of the system to accept the password.

  I did a restore to factory on the Pavilion 20. Pressing me F11 has troubleshooting screen and I chose the system restore. All right

  I set up the UserName Admin and the password carefully (but don't think to do a password recovery disk).  I installed a different AntiVirus Norton application, a default value.  So I uninstalled Norton.  It required a reboot to complete uninstallation.

  This is where my problems started.

  Upon restart, the computer will not accept the password!  There is no mistake here.  It was carefully designed and entered in the creation of duing twice.  I even considered perhaps that I soon take my finger on the SHIFT key (twice) then tried many variations of SHIFT or no change for the capitals and even the next character in the password.  I restarted 50 times trying to get just one time and then I would like to choose a new password for connection.
  
  For the next, I thought I could just do a restore of the system from zero and re - configure again.  But now there is no option for me to use the system recovery.  This option is missing!  I spent many hours on searches of google for similar problems.  It's just not there.  I tried to use F10 and F11 to enter the system recovery.  I get to the menu troubleshooting and it has 3 options: Refresh uoir PC, reset your PC options and advanced.
  Clicking on advanced options gives me the system restore (a restore point (doesn't) usung) System Image recovery, startup repair, command prompt and UEFI firmware settings.
  
  I'm positn gthis in the hope that I can do a system recovery to the command prompt.  Is this possible?  If this is not the case, how can I do a system restore when the OPtion is not avaiiable?

  My question is: a complete system recovery was done, why it is no longer possible to

  Hello Newton51

  It will display the number of full model of the computer.

  I don't know what happened on your system but when you do the reset of the system, don't go not advanced.

  You should be able to click on reset your PC. That will erase the C: partition and reinstall Windows.

  

  When its finished, and you get to the part where it asks you to create a password for the user, LEAVE BLANK.

  Restart to make sure you can connect without using a password.

  IF you succeed at this stage, create your HP Recovery Media via the HP Support Assistant.

  If you enter an impasse once again, recovery media will wipe the drive and reinstall everything, including the recovery partition.

  NOTE: HP will allow you to record only one copy of the recovery media, so not to interrupt the process when you start.

  Now remove Norton and restart.

  Install this that never new you want security.

  When you're done, go to your user profile and carefully create your word password but do not close yet.

  Create the key to reset password on a USB key.

  Now restart and test your password.

  You have a USB reset if it doesn't.

  ----------------------------------------------------------

  If you are not able, or do not succeed to reset the PC, you have two options. Use the MS media creation tool to create recovery media (from another computer).

  Then, reinstall Windows 8.1 and download your HP drivers and install them.

  Or

  Order directly the appropriate recovery of the HP Support media.

  Contact HP worldwide | HP® official site

  Choose the country you are. Choose Help, then to the House.
  Enter the full product number and follow the prompts to contact Support.

  Chat with an agent will ensure that you get the appropriate recovery media.

  Hope that helps.

• I restored the system backdated daily to remove scareware. Firefox does not load

  A naughty site prompted me to a lot of Windows security to scna for threats. After I discovered that it was not authentic I ran a restore of the system and with retroactive effect of a day. Now Firefox does not load when I click on the desktop icon. I am running XP Pro, Firefox 9.0, Quickheal antivirus. What is a common fault?

  You can run a clean installaation of 10 Firefox and check

  • getfirefox.com

• Restore the system (win7) after upgrade to Windows 10

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  Posted by niikos
  

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  There is no solution?

• Cannot restore the system after a virus attack

  After infection by several virus Trojan horse my computers hit by the old blue screen of death.

  The system can operate in safe mode with networking, but will not boot normally without returning instantly to the blue screen.
  The system restore program will not work in safe mode, because he says has no date set to roll back, when I try to set a date to roll back it comes to properties system saying that it should be returning it on the system protection.

  All the solutions to put an end to my plague of blue screen and a restorableness?

  Hello!

  Sorry, but I think that in this case, the only solution is to reinstall Windows. :(
  If SafeMode doesn t you nothing and sometimes viruses destroy the system roll back function.

  I had a similar problem a few months back, and the only solution is to reinstall Windows. I had no change to remove the virus.

  Good luck!

  Good bye

• Analyze the error message and unable to run the system restore.

  In an analysis of viruses with Avira, I get the following message and the scan cannot be completed; "The exception unknown software exception (0xc0000409) occurred in the application at location 0x0042ff93. Click on OK to terminate the program. "It only just happened without any problems in the past. I have not loaded since the last scan and there is no problems with the pc except that I also tried to restore the system to a date before that happened however it fails.

  If you have problems using the Avira antivir then I recommend to remove from the system and download the latest version I m using the same tool and have updated it today

• I have recently had a hard drive crash, fortunately everything was backed up, but I can't find my Firefox bookmarks in the back upward to restore my system, can anyone help?

  I have a fill Windows backup of my hard drive took about 12 hours before the drive failure. I restored my system, but have failed to find my previous favorites of my previous version of Firefox. I guess I asked which folder they are in the backup system?

  All your data such as bookmarks, passwords etc., is contained in a folder called 'profile '. See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data

  You can recover your data from the old, if it is still intact and move it to the new profile. This article explains how to on this issue: use of the Profile Manager to create and delete profiles Firefox

• Re: Need help for the restoration of the system

  Hi, I need help!

  I recently bought a Toshiba Satellite. I had some problems when trying to install some programs, some seem to fail. I wanted to clean the computer with system restore disc, only to find a record of 32-bit to a 64-bit computer.
  There is a repair of the setting system installed on the computer but it does not work, when I put it on disk, files, it cannot be opened.

  I can restore the system somehow repair; It must have been damaged by a virus. It should come with a big warning that the disk is not compatible!

  I have burned one day drive the first if I d just so you know! Any advice?

  Hello

  At first, I must say that you should tell us what model of laptop you have exactly.

  I put t know what cell phone you have and what you have with her, but in fact, it's that many laptops come with preinstalled OS 64-bit and 32-bit version on DVD.

  In this case, you must create own 64 bit preinstalled use Toshiba recovery media creator recovery DVDs. Alternatively, you can install 64-bit without DVD disk with HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Of course, this will not work if you didn't change the factory settings.
  Try if it will work for you.

  At the end I would say that what I wrote is detailed described in the document s user manuals but I presume that you didn t read it, right?

• Satellite P300D-136 - how to restore the system?

  Hello

  I own a Toshiba Satellite P300D-136 with Windows 7 (64-bit) and I want to restore the system. I've tried the way by clicking on the value 0 or F8 at startup, but it does not :-(

  The HDDRestore Partition is available...

  Best regards

  Andi

  As far as I know Satellite P300/P300D comes with Vista and not with Win7 for Win7 installation drive recovery HARD work not at all. You can install Vista, maybe, but certainly not Win7.

  Because of this, I assume that you have installed your own version of Win7. Can you confirm this?

  Is that HARD drive recovery facility (F8 > fix my computer) works with the installation of recovery only (out of the box).

• Restore the system to the original settings

  I'm trying to restore my computer to original settings to overcome a Trojan horse that has hijacked my Internet browser. When I use the restore option, it only allows me to come back in 3 months and then tells me that the parameters are then the same as today. How to restore original system checkpoint system - for when I bought the computer in March 2003? Thank you much for the help.

  Hello

  If your dining options offers more restore points, then there is no chance of working with this function.

  So if you want to retrieve the original settings, you must recover your system with the supplied restore CD.

  Good bye

• Z220 CMT Workstation: restore the system to factory settings.

  Model: Hp Z220 CMT Workstation
  OS: Windows 7 Professional
  
  I'm trying to restore my computer to factory settings. I pressed ESC several times at the start to the top of the computer. Select the system restore, but the computer just hoot to Windows form. I can not connect to windows, because as some error loading windows.
  
  Is there another way for me to restore the system to factory with a clean Windows 7?

  > is there a way for me to get the recovery disk?

  Two ways:

  1. in Windows system work, running the same version (32-bit? 64-bit?), you can burn a disc of "recovery."

  2. find a friend with a 'detail' in the Windows 7 operating system DVD (remember this is the same 32-bit or 64-bit, your system) and borrow the DVD of him/her, or get him or her to burn a copy of it.

• There isn't aren't any system restore dates on the screen of the system files

  When I went to the restoration of the system, it is not all available dates to do. They may not be entered automatically. I'm working on a HP Media CenterTV? PC computer. Product # RF254AA

  Hi, thanks for responding to my message.

  The problem is, the system restore left in operation, it does simply not more.

  It is not off.

  It does not automatically create a restore point.

  There are no points of restoration, click on.

  I found a Microsoft article on how to reinstall the service. This is way beyond my knowledge trying to do it myself.

  Sent the article on the Microsoft Certified System Engineer who services my computer to see if he can help me.

  by remote access.

  Thank you

  Diane