"There is no camera connected to this computer.

Similar Questions

• Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  original title: no camera not connected to this computer.

  Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  Help, please.

  Hi Shaykc,
  Here's a quick walk to implement this cam:
  http://support.Microsoft.com/ph/7746#tab1
  Eddie B.

• When I opened my LifeCam shortcut, I find a message that say: there is no cam connected to this computer?

  I got a new cam, Microsoft LifeCam VX-700. I installed it is the file installation, which is LifeCam.exe Version 6.2.29.0, and in the final phase the instruction tells me to connect my lifecam then restart my PC. After I have my Pc is open again, and when I began to open the lifecam sortcut I background this massage: (there is no cam connected to this computer)? I don't know what the problem is and really I need it works well to have a good time with my cam and its dashboard. IM waiting for your reply soon.
  Thank you all very much. :)

  Hello Ossama El-Nady,

  Thank you for your message.  Click HERE to download the latest version of the software for your webcam.  It is possible that the driver available for download is newer than the driver that you received with your webcam.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My Microsoft LifeCam program gives me a message that: "there are no cammera connected to this computer.

  A few months ago, I unplugged my computer to go to my friends for a LAN party House, when I am back and plugged my LifeCame VX 2000, and started the software called Microsoft LifeCam, it gave me a message telling me that there is no cammera connected to the computer.

  I then went to the Device Manager and it says I have a vega USB 2.0 connected and nothing on a Microsoft LifeCam.

  I also went to check on Skype and he also said I have a vega 2.0 USB connected.

  Another strange thing is that only the microphone of this "vega USB 2.0' works on Skype and not video.

  I have windows 7 ultimate 64-bit, I defenitely have the system requirements, because after all, it's a gaming PC.

  I have the latest drivers for and software as far as I'm concerned, because I checked in the device for Update Manager and he told me that all my drivers are up to date.

  Hello
   
   
   
  Method 1.
  With LifeCam VX 2000 connected in the not working USB Port...

  (a) open the Device Manager and search for imaging devices -> Microsoft LifeCam VX 2000 and Uninstall. (no need to remove the system drivers, can leave installed)

  (b) now search sound, video and game controllers -> Microsoft LifeCam VX 2000 and Uninstall. (also good can leave the drivers in the system, no need to delete)

  (c) now unplug the webcam not workingUSB port, wait a few secconds andplug a job.

  succesfully d) wait a while until it initialized in the system.

  ((e) now doing exactly the same things, as described in stage a) and b).

  (f) now change ports USB again, wait that it is properly installed in the system sayingready to use.

  After this webcam should work and Microsoft LifeCam application should detect it in the first USB port which did not work before, saying"There is no camera connected to this computer".

   
  Now check if the camera initializes and also if she also works in Skype.
   
  Method 2.
  If the problem persists, you can see the methods listed in the section below.
  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software
  http://support.Microsoft.com/kb/933311
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• I was using Microsoft Fix and one of the messages for me was that "more than one user is currently connected to this computer"

  While checking on Microsoft 'Fixit' to see if everything was working OK, I got a message saying as follows: more o no user is currently connected to this computer. »

  I can't understand this because I am the only user on my computer.  No other Member of my family is using my computer, so can you help me this please?

  Thank you.

  Hi Deepak B,.

  Thank you very much for your help.  I did as you suggested.  First: the Safety Scanner did not find a malware, etc. on my computer, which is really good.

  Second - accounts - outside myself - on my computer. I was surprised to see there was a guest account as well as mine.  I now extinct 'guest account '.  I can think about is my daughter and her husband who make us visit once a year.  April, my daughter knows a lot about computers, so I think that it is the culprit!

  That is the problem solved, and I am grateful for your help.

  ElmGrove

• My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  More than likely your MBP has a hardware problem that cannot be properly addressed at an Apple store genius bar.

  You can try to reinstall an OSX, but I doubt if that will be successful.

  Ciao.

• Problem connecting Dlink - the connection with this computer still only shows "Local".

  My Dlink wifi can connect to all of my other computers, with the exception of a laptop Fujitsu running Vista. Only the connection to this computer always shows "Local".

  Dlink and Fujitsu point to another, and Microsoft has no viable solution. Help!

  Hi AlLohUX,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem provided, I understand that you are unable to connect to the network on the Windows vista computer. Wifi connection Dlink says local only.

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  Save your work and restart the machine.

  On the router or the modem:

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you can reset the TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  (a) disable the IP helpdesk:

  (b) hold Windows key and type R, type "services.msc" (without the quotes) and press enter

  (c) scroll down to the IP assistance service, right-click on it and select Properties
  In the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply'.

  (d) then click on 'Stop' to stop the service from running in the current session
  Click OK to exit the dialog box

  Also, check out the help articles and check.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Information system may not collect information. Unable to connect to this computer. Check that the Winmgmt service is running.

  Information system may not collect information.

  Unable to connect to this computer. Check that the Winmgmt service is running.

  My problem has been set by following the steps:

  1. click on start-> type CMD-> right click on CMD of the result-> click on run as administrator

  2. type the command net stop winmgmt and press enter

  3. Open command prompt and click on start and type system32-> open the folder system32 in the result pane.

  4. in the system32 folder open Wbem and locate the repository folder

  5. right click on the repository, then click Rename

  6. change the name of the drop to Repository.old folder

  7. switch back to the command prompt and type net start winmgmt and press ENTER to run command

  8. close all windows and restart the computer and try to Msinfor32.

• session remote desktop connection logon message: another user is currently connected to this computer

  I'm trying to figure out how to make a remote desktop connection without the user on the computer, as I log to get to kickoff. When I start the DRC while the other computer is in use, I get a message saying... session remote desktop connection logon message another user is currently connected to this computer. If you continue, this user should disconnect from this computer. Do you want to continue?

  Click Start / Help, then search for help on the "fast user switching".

• The number of connections to this computer is limited

  Currently, I get an error stating that "the number of connevtions to this computer is limited and all connections are in use.". When I first watched this error, it says that it comes with SQL server by default no connections. I d/l had SQL but never really used, perhaps only open a couple of times, but he was. I just uninstall all SQL applications on my computer. I restarted and left no trace I can find of SQL, but I still get the same error.

  Maybe uninstall SQL has not changed this setting to the original, or maybe something else happens. I was hoping to get help or advice. Please let me know what you would say that I do.

  Thank you

  Hello

  The server probavbly brought changes to the system, who are always there.

  It seems to me that you will get the best answer to re-post on e-forum SQL.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• There is no camera connected

  Trying to access my webcam and it just says no camera connected? How... it's on my laptop! frustrated urgggg!

  You may need something open who still think it's using the camera.   http://osxdaily.com/2013/12/27/fix-there-is-no-connected-camera-error-Mac/

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >
   
   

• ERROR: There was an error connecting to this site [ERROR:-1].

  I deleted a site in site management and then I could not connect new Business Catalyst

  Hi Stelios,

  It is the site of the partner, and it was the last active site under your account - therefore when you delete it, you didn't is more couldn't identify, you do not have any other active site to be redirected to.

  I have restored, so you should be able to post the site that your choice of Muse.

  About the connection, after that you publish the site of Muse, connect to it directly by going to http://siteURL/Admin (replace siteURL with the URL that the site will be - should be like some - name.businesscatalyst.com)

  There is no need to connect to http://businesscatalyst.com/admin and then navigate to the sites you post of Muse, you can simply connect to each other directly by simply adding ' / admin ' at their address (URL).

  Kind regards
  Florin

• Login problem there is only one user on this computer

  When I try to login, I get this message-

  Your system is low on resources. You cannot open a session as a new user. Please use an account that has already been noted on

  See: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/ec925cbc-51b1-4cfb-aff5-659be630606d

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.