There is no departure upward in the options to restore session

Similar Questions

• When firefox crashes me gives is no longer the option to restore session so I'm losing all my tabs, it is extremely frustrating!

  I don't speak of the option "save and exit". I mean when the mozilla crashes it gives me is no longer the possibility to restore my session, instead appears a page that says new tab, this isn't even the homepage google/mozilla. Is there a way to solve this problem. I have not changed my settings.

  The settings were wrong by default with the new version, because I've never made any changes to my personal settings (new version just change session restore I think). But this is how I solved the problem (I have no accidents, but after an auto reboots for updates I had the possibility to restore the tabs again). I will be "BOLD" by the party who has solved the problem:

  "For another session of restoration of problems, you may need to make corrections to your Firefox settings:

     At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options
     Select the Privacy panel and make sure Firefox will: is set to either Remember history or Use custom settings for history.
         If Firefox will: is set to Use custom settings for history then make sure that Permanent Private Browsing mode is not selected.
         If Firefox will: is set to Use custom settings for history and Clear history when Firefox closes is selected, then click the Settings button and make sure that Browsing History is not selected.
     Click OK to close the Options window"
  

  I think the problem was that I've always had the selected history navigation that does not work as it used to with the new version.

• Firefox crashed and does not give me the option to restore my previous session.

  Hello

  I've been using firefox for a while now and so far, ive never had a problem like this.

  Firefox crashed last night while I was asleep, and when I woke up this morning to turn it back on, the crash reporter asked me that if I wanted to restart firefox, I did, but when it is loaded, instead of asking if I wanted to restore my previous session, he loaded a blank page which had a white patch is looking for unusual at the top where the tab bar is supposed to be , with the legs of loading below.

  The tabs that I had loaded were all very important to me and I would like to find a way to get back them if possible, however, I was unable to find anything on the other help pages that describes the solves my problem.

  Please help if you can, it would be greatly appreciated.

  PS I apologize for not to include an image of the window of buggy, it didn't occur to me to take a screenshot before I closed it.

  sessionstore.bak files are no longer used in current versions of Firefox, so they are probably for some time ago (seven 2014:20140923175406) and may no longer be of use.

  One possible way to inspect a sessionstore.js file or a file in the sessionstore-backups folder is open in a Firefox tab and to evaluate that JavaScript code in the Web Console (Firefox/tools > Web Developer).

  Paste the code into the Web Console command line and press the Enter key to evaluate the code.

  eval("ss = "+document.body.innerHTML.replace("<pre>","").replace("</pre>",""));
  sd='';
  for (var i = 0; i < ss.windows[0].tabs.length; i++) {
   var ent = ss.windows[0].tabs[i].entries;
   var last = ent[ent.length-1];
   sd+="["+(i+1)+"]:"+"<a href="+last.url+">"+last.url+"</a><br />";
  }
  document.body.innerHTML=sd;

  See also restore Session in Firefox for emergency:

  • https://Firefox-session-restore.herokuapp.com/

  (this site is no longer available)

• Is there a way to develop all the options in the menu accordion?

  I wish I had all the tabs in the menu expanded accordion. Y at - it a setting or a button to have all extended options? Thank you.

  Thanks for trying to help people if I can, if you put all the years in an accordion rather than a series of accordions, then you could open/close the entire batch at once, this subject comprising the years in three accordions, 1998-2003, 2004-2009 (2010-2015), so at least theres a good piece of information available / visible to the departure?

• Is there a version of Windows with the (optional) hardware write protection?

  Want to do something as a Live-CD
  Or a Usb key with a hardware write-protection-switch.

  Hello

  You can find this document useful. If you have Enterprise or Ultimate version of Vista, BitLocker is available. Ditto forWindows 7 as well.

  Hope the information is useful.

• Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

  Original title: restoration works not

  The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

  It works for some configurations.

• How can I delete the page to "Restore Session" appears everytime I open Firefox, even stopping it correctly?

  Since I upgraded to Firefox v20, a problem occurred when I close Firefox properly (close the browser and then exit the application that I'm on a Mac) but when I open it again, I'll get a message. This message is 'Oh it's embarrassing... "and try to regain my tabs I had before me. This also occurs if I have just one tab open and then close it. I was wondering if there is a way to fix it!

  Hello epifight, this is currently an issue in firefox when you close all firefox windows open first and then close the application subsequently - the bug should be addressed in a more recent version of firefox.

  a workaround in the meantime, you could close firefox (via firefox > quit) while the browser window is still running or try this: enter: config in the firefox address bar (confirm the message information where it appears) & search preference named browser.sessionstore.resume_from_crash. Double-click it and change its value to false.

• X61s - save and restore - there is no option to restore factory

  I have a X61s with Vista Home Basic and I want to use ThinkVantage to a factory system restore.

  I can start the restore utility & rescue (via the button ThinkVantage or F11), that's fine.

  The problem is: there is no option "Restore Factory. I'm only given the option to restore from a backup.

  Any ideas? The fact that I can access the utility R & R but not get this "Factory Restore" option.

  Thank you

  kamszelei, welcome to the forum,

  of a lurker

  What version of think Vantage system however you have installed?

  If you have version 3.13.0009 installed, please try the following: start Windows and run TVSU.  She's going to update, restart, and then update again. I hope that the ability to recover the contents of the factory will be at your disposal.

  Please also check the following registry key; Common HKLM\Software\Lenovo\TVT

  If the "System Type" key is 1, change it to 0. If it is already set to 0 doesn't change anything and let us know.

  Hope this helps

• Cannot access the option of factory restore?

  Hello world. I have an old A505-S69803 that I no longer use. I have been aware of a poor student in a University nearby who profit greatly from a laptop, but cannot afford it. I want to give my Toshiba and I start cleaning off my personal data. Last step, I want to restore it to factory settings, but it does not work.

  I read everywhere on the internet that I can get here by organizing '0' during boot, but it doesn't matter. Even the manual Toshiba says to do. Is the closest I get into F8 during startup, and then selecting the Toshiba Recovery Wizard. However, it is demanding recovery media. When I bought the laptop, it was supposed to come with a recovery partition, and I did get NO media.

  How can I access the option to restore to factory since the restore partition? Thank you.

  Andrew

  Hello Andrew

  The question is: recovery partition is still available on the HARD disk?
  Last is OS installation original Toshiba installation with factory settings?

  You can install recovery image using HARD drive recovery option if the laptop has only factory settings.
  I presume that you described in the manuals, so if you didn t such fund recovery media s is not possible to have access to recovery files you have two options:
  -install the clean version of the OS. Support page all the necessary drivers, tools and utilities that you can download at Toshiba
  -Restore disc original order from Toshiba

• Satellite L 40 Vista Premium - cannot read the original system restore disk

  My satellite L40 was bought a year ago, and so far I never needed the system restore CD. But now I have a missing system file so I will try to re - install. But my computer will not read the CD, if I insert it before starting my computer or windows Vista.
  Is there a way I can download the CD to restore the system on the Internet?

  Hello

  No you can't download because that would hurt microsoft license stuff. I recommend you ask a partner in your country for replacement, if your machine is still under warranty.

  Please go here and find the service provider nearest to them for help.

  Welcome them

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• I can't add modules as the option for adding of modules is not there

  So, how am I supposed to add extensions now. I removed adblock more because I thought that's the reason for dns unlockert to settle, and now I can't add any other version of the anti-ad.

  I went to add ons site and then tried to install one and there was a message adding extensions had been disabled and I want to enable it. I enabled and the option was available on the addons tab. Although I don't know why it has turned off by itself first.

• We have completely lost the SEND function in Thunderbird. We are not in offline mode. There is no button SEND or send option anywhere. Where at - it go?

  The send function disappeared completely. The function 'Send later' has also disappeared. We checked all the options in the menu bar and 'send' disappeared.

  Buttons forward and reply are visible. If you select an e-mail and press forward, email opens for allows you to add a message, but there is no way to send it. Ditto for the answer.

  Also, we cannot get the hidden menu bar now to show. Pressing ALT does not work. Or not 'right click on a section empty tabs band' as seen in Mozilla.

  We have made no changes to the Mozilla software, does no updating or downloads. One day, the send function simply not exist.

  Any help or assistance would be greatly appreciated. Thank you!

  Alt or F10 should make an appearance of hidden menu bar.

  You need the menu bar to turn the missing toolbars.
  The Send button is the Composition toolbar in a window of writing.
  You must have an entry window open.
  Press alt or F10 to get the menu bar appears.
  The menu bar select View-Toolbars and rekindle the missing toolbars.

• Is there a manual of Thunderbird? I'm trying to understand all the options to display/Threads.

  I'm learning to Thunderbird, hoping to adopt as my e-mail client (cannot float Eudora more). The forums are not effective for learning. Right now I'm trying to understand all the options to display/Threads, but tomorrow it will be something else.

  Hi Tom,

  There are some resources that I found for you to learn Thunderbird as you go.

  • http://en.flossmanuals.NET/Thunderbird/
  • https://cs.uwaterloo.ca/CSCF/HOWTO/Thunderbird/