There is no sound after an update by microsoft.

Similar Questions

• No sound after Windows updates - don't Please Help!

  I just finished a full restore my system back to factory settings because I had no noise whatsoever.  After doing this, I had sound for a while, until some update has been installed and now I have not YET healthy.  It's extremely frustrating!  Given that the sound worked until one of the many updates has been installed, this leads me to believe that the update is the cause of the problem.  When I click on the sound tab, it shows that everything is working ok.  I tried everything I can think of to remedy to this problem.  I uninstalled, reinstalled and updated the driver for the sound.  It does not work.  I tried to use the restoration of the system to an earlier time and that doesn't work anymore (because there was not a lot of restore points because I had to complete my system restore.)  I don't know what to do to solve this problem.  I'd do another complete restore of my system, but I'm afraid that the updates will cause the same issue.  I'd appreciate any help!

  Looks like you already tried everything, but the following items may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

  Solving audio problems in Windows Vista
  http://www.ehow.com/how-does_4966770_troubleshooting-sound-problems-Windows-Vista.html

• No Audio output device is installed - no sound after auto update yesterday

  After an automated update yesterday, my sound no longer works on my Dell XPS 15.  There is a red "X" on the "speaker" icon.  When I was looking for solution last night, I tried a lot of things and then saw a comment on a possible error in the download, but now I can not find this comment.  If there is an error in the update, will there be a fix soon?  I would use my sound.  Thank you!

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  See you soon.

• No sound after Skype update

  While signing in to my account, Skype closed and made an update. After the update is complete, I realized that I had no sound Skype at all. I hear anything in Skype calls to notifications. I tried everything I can think of. I checked my sound settings, made sure that Skype was not cut in the mixer, made sure that my volume was set correctly, rebooted my computer and Skype and finally verified online. In the audio settings in Skype, Skype record it sound out, and he said he's going to the right place. Help would be appreciated!

  Solved, it seems that my headphone cable is broken and only allows sounds through, set in her jiggling in making...

• No Logitech G35 headset sound after Windows updates

  Original title: last updated

  Twenty minutes earlier on 11/08/2011 my self out of the windows updated. After the update has been installed and restarted my computer, my logitech g35 headset is not working properly. If I turn them off in the control panel and reactivate as default device, I get 1-3 seconds of the sound before they be cut again. So two questions. 1 What is this happened to someone else. 2. how to fix it.

  Hi Hexter23,

  1. what application you are trying to use the headset?

  2 update did you recently installed on the system?

  3. are you able to hear the music / sound through normal speakers?

  Method 1:

  You can consult the following link and run the troubleshooter of audio playback, if it helps.

  Tips for solving common audio problems

  Method 2:

  If the previous step fails, then manually, download and install the latest audio drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if that helps.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Cannot restart the computer after downloading updates from Microsoft

  I downloaded updates from microsofts and the next step was to who I checked ok restart.
  The computer turns off and then tried to start, but stops and the error of reading a disk error has occurred.
  Press Ctrl-Alt-Del to restart. It does not work. Cannot enter safe mode or use my cd XP pro disk. Need some help here.
  Is it possible to start this computer from my laptop? My laptop using vista altimate. I can be reached at my e-mail address * address email is removed from the privacy *.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  They will help you in the above discussion group.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot restart after optional updates from Microsoft. Down arrows don't work when in the loop boot selection page

  Went to Microsoft Update and downloaded and installed a few optional upgrades, including one about a driver. After installation, will not restart. Arrive at the page Windows XP will then black screen and then the boot selection list. Is "glued" to the normal startup and arrows don't work for go mode without failure or any other option. He just times down, try to reboot and loop. Help!

  Hello

  Have updates you installed?

  You can check the KB number for the update in the update history:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 1: Unplug the power cable, the keyboard and mouse and then reconnect it back. Now, check if you're able to boot in safe mode (by using the arrow keys) or normal mode. Send back the same.

  Step 2: Alternatively, you can restore the system from the recovery console.

  Reference:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Tecra 9100 - loss of sound after Windows Update.

  I just got my hands on a 9100 second hand and have been re - install XP Pro. I was going well and had everything except the card SD not working after downloading all the drivers concerned off Toshiba site.

  Micorsofts update the site decided to download new drivers for the card his Yamaha, and now it says NO device.

  I reinstalled the drivers from the toshiba site, but despite everything I do, it still shows no device.

  Ive tried reinstalling the software Synth as well, but having said that I need to run the re-installation of synth program. But there is no directory on the drive for what Yamaha and no entry in the Add/Remove for yamaha synth window or in the start menu.

  I'm at a loss where to go then, short from once again and re-installing the OS to the top, and it's a good day's work.

  Is a cleanup utility exists then I can just redo the part of sound card?

  Help please. :-(

  Hello

  It seems that there is a problem with his Yamaha card driver after the installation of the Microsoft Windows XP SP2.

  Seems that you need to update the audio driver of Yamaha!

  After a short investigation, I found this site:

  [Do not install SP2 if you have a card his Yamaha AC - XG | http://www.housing.hawaii.edu/resources/support/yamahaac-xg.htm]

  Best regards

• spectrum 360: no sound after windows update

  Hello

  As a result of an update to windows 10 for the anniversary edition, I had problems with the sound.

  It says the audio device not detected.  I uninstalled the audio drivers and reinstalled them and it will work, but after restarting the computer, it gives the same error.  Sometimes a reboot it will work again, otherwise have to reinstall again.

  I couldn't run constantly, so I restored windows on the previous generation and it works well again.

  Anyone had this problem or could fix?

  Thank you

  Thank you.

  I ended up doing something like that.  I uninstalled the program conexant himself and installed an older driver (9.0.57.0), and so far it has worked.  I got the driver from the hp support page.

  The new driver worked until a reboot, then had to be reinstalled again.

  I thank once again.

• No sound after an update from Toshiba

  I followed the instructions of what looked like the official update from Toshiba to uninstall something I don't remember exactly what, but I was directed to the Panel, sysytems and something to do with video, etc, and now I have no sound. System says no audion output device is installed.

  I must say from my experience, this time with a Toshiba Satellite is less satisfactory, always goes into hibernation and is difficult to restart, even after updating the BIOS suggested!

  Hello Wan

  And what model of laptop you have exactly?

  I'm sorry, but how understanding your problem anyway, he can't remember what you did. Who knows what you do with your laptop. All other problems can be caused by your experiences and to do something to change the configuration of the operating system.

  In this case I recommend a radical, but for you, the best solution: back up all your data and install the OS by using recovery media delivered. I'm sure with the factory settings everything works well again.

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

  Hello!

  I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

  Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
  The situation was:
  -The sound device has been recognized;
  -The MIC works (but I can't hear it);
  -The speakers do not work!<- the="" real="">

  Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
  I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

  Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

  Sorry for my bad English,
  Thank you very much!

  Murilo

  Hello Md2

  You can hear the noise if you plug headphones into the audio?

  If there is his helmet and then the audio device works well.

  If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

  don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.

• NO SOUND AFTER WINDOWS UPDATE 8

  Hello

  Please help me, lost after installing important updates for Windows Mobile 8, all audio sounds. I don't know what happened. Bearly need an audio. Thanks in advance.

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT HD Audio Installer - Windows 8.1

  IDT HD Audio Installer - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No sound after Windows update

  Automatically updating Windows and now I have no sound. If I play something about winamp output volume meter shows that it plays but no sound, I checked the speaker system on another computer and it is also ok. It seems that a few other people have the same problem.

  Hello

  There are 2 ways to solve this problem:

  Go to your computer, or your sound card, the manufacturer Web site > looking for drivers and downloads Section > put in your computer or sound card (if you installed it yourself) model number > find your operating system > download and install drivers etc you will find Audio.

  __________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• No sound after the update and its orange on my mediasmart region

  I've updated my drivers and have no sound and the sound button above the main panel is on an orange permanent and won't do anything.  I used Microsoft fixit. Nothing and and updated my Bios to 17/08/09.  Nothing made a difference.  Sound was working until I updated audio driver IDT uncertain of how to fix.

  Any help would be greatly appreciated.

  Other people have left P/N.

  P/N is NB231UA #ABA

  It is a Pavilion dv7 1245dx.

  Thank you.

  Can you check in Device Manager, if there is that no error related to her under sound, video and game controllers... Also, can you tell me if the update was pushed from HP or Microsoft...

  Here is the link to audio player... ftp://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45073.exe

  Who I would like to install and check...