Thermal fan doesn't cool the Studio 1749

Similar Questions

• Satellite Pro U series: the fan starts to operate - the computer doesn't

  I had this problem since the computer was new (1 year now), and it has increased. Now I can work the internet on the computer, an hour before shutting down the computer - it is too hot. If I don't use products of word or office without being online, it's OK I tried to shut down unused application, it helps a little but not a lot. What can I do?

  Have you tried to clean the fans with a jet of compressed air?
  Many users recommend this tool for the cleaning of the fan, and it looks like it works very well.

  I think dust and debris inside the laptop to prevent fans turn properly and cooling the temperature rises and this leads to an overheating problem

  But if this doesn t help get rid of the problem of overheating then the ASP may be a last resort.

• Satellite C55-A-1RV cooling fan is placed on the CPU?

  I have a Satellite C55-A-1RV model and I want to know if this machine have a fan on the processor...

  Thank you

  Of course, there is a Silent fan cooling which cool the CPU.

  This cooling module is one of the essential elements for laptop... the thermal grease is placed between the fan and processor and without such cooling CPU module overheats

• Dell Studio XPS 9100: Case fan care? Cooler CPU upgrade options?

  I want to upgrade the case fans in my XPS 9100, but I've seen much contradictory info in the actual specifications regarding size: are these 92 mm or 120 mm?

  In addition, it is an i7 960: is there a compatible upgrade for the CPU cooler? I don't want or need to COO liquid: want to let it cool a bit. Basic time are constantly around 52 C.

  I think that on all processors in the LGA 1366 socket, the hoses are the same.  On the 9000, I used the cooler DBX - B on 4 different processors in the LGA 1366 socket.  Any socket LGA 1366 cooler should operate, regardless of the CPU.

  The DBX - B can be installed to direct the air in 1 of the 4 directions, depending on how it is mounted.  I have mine pointing upward, to the power supply.  (Note fan blows air in the direction of the fins in aluminium).  Idea is to keep the heat away from the other components of the motherboard and direct it to two fans at the rear (one being in the power supply), which are tailpipes.

• Tecra Z50 A-h-13 - fan works half of the time

  Hello

  I got a new Tecra Z50 A-h-13 (i5, 8 GB RAM).

  Although the processor is underemployed (approx. 20% of capacity), the fan works half of the time!

  When the fan is running the Toshiba PC Health Monitor shows approximately 44% CPU temp. and 36% system temp.

  When the fan works not the Toshiba PC Health Monitor shows similar values!

  What is it good for?

  In my opinion, the fan is not alone. I have not found a possibility to adjust the speed of the fan (PC Health Monitor always shows 45%) or the starting temperature. The current Version of BIOS is installed.

  Is it possible to get a SMART fan control?

  Best regards

  Zvonko

  Hello

  The manual fan control is very limited.
  What you can do is to change some parameters in the Windows power options.
  Go to the control panel? power options
  Select the power plan you use.
  Then choose Advanced settings.

  In the advanced power settings, you will find the option method Cooing and the performance of the processor.
  I recommend you degrade the performance of the max processor at 90-95% and to change the method of passive cooling (both for the battery and plugged)

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• order a fan with USB6251 and the Daq signal accessory

  Hello

  I have a school using Labview project and the USB6251 connected to the Daq signal accessory card.

  The Labview program must read continuous temperature (Ia 4 channel, internally) temperature probe connected to the accessory of Daq Board signals. When the temperature reaches an established value, then a led on the front panel should be lit and a singal output data acquisition should start a fan connected to the acquisition of data which cools down the sensor, then stops.

  Would it not be possible to do something like that? Even if I generate a square signal and the fan only works on the State of the signal. The fan requires at least 120 mV DC current. I'm afraid that if I take these courses for the acquisition of data, I could damage the unit.

  Thank you.

  I guess you mean 120 current my DC . If you look at your spec of daq card, you will find that the current max are far below 120 my. This applies to the two analog out and digital out. Take a look at this site, it may be useful to some. site nice http://www.me.umn.edu/courses/me2011/robot/TechNotes/motorcontrol/motorcontrol.html . If you want the speed controller, you have two options PWM or voltage of the motor regulation.

  Good luck

• T61 issue of Fan: turns silently to the POST, and then never...

  All,

  Any thoughts on what is happening here?

  I have a T61 with a 15.4 screen "and the Intel video subsystem. After about 10 minutes of operation under Windows, the system shuts down, and after that my wife brought this to my attention, I have observed that there is no flow of air coming out of the vent and the underside of the computer is very very hot. Fan death, right?

  So, I open the T61 upward, leaving the trackpad and keyboard connected and turn on, hoping to check a fan of bad/loud/clogged. Well, the fan starts spinning at the POST and it does so freely and so in silence, and after a few seconds, it turns down, never to go back to the top.

  There is no error message FAN ERROR on the screen at the POSITION either.

  This seems to be more a problem of controller fan than a problem real fan.

  Someone at - it advice or ideas?

  My gut reaction is that simply replace the fan will translate the new fan does exactly the same thing, but maybe someone can put me straight or share their experiences similar here with me.

  Thank you

  Warr

  Turn down the fan after POST is normal, but it should turn on again during or after startup.

  Please check the fan side, if they are blocked by dust. Block the propeller fan with a match or tooth-pick and blow compressed air from the outside through the sides into the heat sink.

  You should also take a look under the radiator and replace the thermal paste on the processor by a new. You can leave the thermal pads if they are not damaged.

• Laptop speakers Studio 1749 does not work after update to Windows 10

  I've updated to 10 Windows in Windows 7 and I have problems with my speakers. They do not work but the headphones work. Anyone know how to fix this?

  Hello. Same answer as one delighted given. Here is a link to the driver IDT audio R260553 Studio 1749. If the driver will not install or run correctly, use the compatibility mode:

  1. download and save the driver to your desktop.
  2. double-click the new icon on the desktop to extract (unzip) the files of the driver.
  3. the wizard of the extractor will create a new folder for the driver files. It will be located at the "c:\dell\drivers\xxxxxx". Note the exact location that the wizard creates.
  4. If the driver begins to install automatically, stop (cancel) installation.
  5. search for the driver files on the hard drive (the location you noted).
  6. find the file "setup.exe".
  7. right click on setup.exe to open the context menu.
  8. Select Properties.
  9. Select the Compatibility tab.
  10. check the box "run this program in compatibility mode for"... Win7.

• (Redirected) Studio 1749 touch screen not working do not after Windows not supported 8.1 upgrade

  I have a Dell Studio 1749. It came with Vista which I've upgraded to Windows 7. I have since deleted the hard drive and installed Windows 8 from scratch, but the touch screen no longer works. I tried to install several recommended drivers before but they fail to install. I can send you the serial number if you need it.

  Thank you

  ScoobyDumDum!

  Dell has only tested and validated Touch for Vista and 7 on this model. We do not know what or where you can find the applicable chipset and touch drivers for 8/8.1. You should ask users on general portable hardware Board for ideas on this company not supported.

• DW1705 card (wifi + bluetooth) will work with laptop Studio 1749?

  I wanted to add the bluetooth on my laptop Studio 1749 feature. I don't want to add a bluetooth dongle and occupy a USB port at all times.

  I thought can I Exchange my current card wifi with wifi DW1705 + card bluetooth.

  Can someone let me know if it will work? Or recommend another card that will be? A link to a page produced Dell / Amazon / Ebay will be extremely useful.

  Thank you!

  The images of the cards Dell Wireless 1705 on ebay on the left, the image of your owner's manual to the right:

  

  Looks like the DW1705 is halfway, but you need to the height...

  http://downloads.Dell.com/manuals/all-products/esuprt_laptop/esuprt_studio_laptop/Studio-1749_Service%20Manual_en-us.PDF

  So you can use one of them too:

  http://www.Amazon.co.UK/JUSTOP-height-express-bracket-adapter/DP/B00DNA3EKM/ref=pd_sim_147_3?ie=UTF8&dpID=31S5Fv6wikL&dpSrc=Sims&preST=_AC_UL160_SR160%2C160_&refRID=082PJ5001MMSYRP5Z270

  I recommend an Intel card:

  http://www.legitreviews.com/Intel-7260hmwg-802-11AC-versus-Intel-7260hmw-BN-802-11n_135541

  

• Computer fan turn while watching the video on yahoo

  The fan of my computer goes on and out.  It's only when I go to a Yahoo video or another site.  No problem with the fan with normal use or watch movies.

  Help!

  Stan

  Original title: computer fan

  Just to help better understand...

  The fan does not turn on and outside.  It is changing speed.  It normally works at a lower speed that is practically inaudible, but accelerates when the system detects the heat grew until it takes more air to cool the processor and other components thermogenic.

  This higher speed is a good thing, so there's a reason it's like yours.   Video uses a lot of internal it resources that produce heat.  If this happens only at the same time to this activity, it is a good thing.

  If yours is a desktop computer, there are things you can do to reduce this.   Let me know if your IS a desktop computer and I can provide suggestions for you.

• System fan failed error after the Swap case

  Hi, I read a number of similar positions on this issue but has not managed to solve my particular problem and was hoping someone can provide additional guidance

  I recently moved my HP Pavilion Slimline S5280t with a Cooler Master case, everything is OK except that I now get a 'system fan failure, press F2 to continue "message every time I start the PC.

  I know for sure, it is caused by the rear 120mm fan that connects to pin 3 connector on the motherboard chassis fan (I tested it with the old 92mm fan and the error message disappeared).  So based on what I read on the forum, the simplest solution is to disable / adjust the configuration in the BIOS to monitor fan, unfortunately, this option is locked to my motherboard (IPIEL-LA3) model.  If at this point, I have 2 questions regarding what I can do next:

  1. I guess the fan sensor detects for the fan RPM so since this is a 120 mm fan, the speed of ROTATION is less than a 92 mm.  It does not reach some predefined threshold and that's why the error message I received.  So I can solve the problem by exchanging the 120mm fan which runs at a higher SPEED?

  2. I read that there is a hidden menu of BIOS with some of the HP PC, accessible by pressing F11 (or some other keys that do not appear in the original start menu), I have tried F11 and which has become a diagnostic tool, does anyone know if a hidden BIOS menu exists for my particular model? (PC model: S5280t, q8300 CPU, Mobo IPIEL-A3)

  In addition, I don't think that there is an update of the BIOS for my model either... so I'm really out of options here.  Please help if anyone has any suggestions.

  Thank you!

  HW7777, welcome to the forum.

  After consultation on your problem with Erico, another Member of the forum, here's what I was told:

  "The three-pin connector for the fan has + (power), mass (-) and an analog tachometer signal." Given that you have tested the old fan on the system fan header and the error message disappeared, you have checked that the fan is indeed the question. You should try another fan to see if it did not have the rear case fan which is connected to the Sys_Fan?  If produce the same results, then you have reason on the down low, the origin of the problem.   If you want to keep the motherboard in the case of Coolermaster then you should consider making or buying an adapter to mount it in her 92 mm fan. Since the Coolermaster case is much larger, you should be able to mount the fan somewhere. There is a lot more air in the Coolermaster case compared to the business slimline the mobo was originally in. "You are right that there is no update available BIOS.

  If your problem is solved, please click "accept as a Solution.

• The Studio XPS 435MT graphics card upgrade

  Hi all

  I have a Dell Studio XPS 435mt with these specs:

  Intel Core I7 2.67 ghz

  6 GB of RAM

  ATI Radeon HD 4570 512 MB graphics card (it's the original one)

  I got nothing so far, but now I want to change the graphics card because I want to play games that require higher performance, I play with a resolution of 1920 x 1080 (1080 p).

  So what do you suggest me? What is the best graphics card can I take, compatible with the studio 435mt?

  I don't want to change the other components (and I mean the PSU in particular) I don't want to change the graphics card.

  So what is the graphics card that pushes the limit of this computer?

  I have another question.

  I bought this computer in Italy and it's because I'm Italian xD.

  Now I'm in Boston for the summer holidays and I would buy the card here. There is a compatibility problem between Italian and American computers?

  I mean the GPU are all the same despite the country or there are a few differences to take into account?

  I'm sorry if I am repetitive, but I don't know if my questions are clear and understandable.

  Thanks for your help!

  I have no budget.

  True, but even once, why would you spend $129 when the same one that costs only $89 HERE at Newegg.  Personally, I wouldn't put a high end as the HD 6970 card in your system, but it is up to you.  For me, just is not there, but I know that others have fact.   Cards more recent performance today they run cooler and are smaller than the last generation.  I know there are people who have put in the hot and power hungry GTX 295 in this system.  If you want a high end card without going overboard, take a look at the HD 6850 and HD 6870.  However, if you have money, you can do whatever you want if you use an i7 processor to go with it.  I'm just a little at low cost.

• WIfi Direct (WiDi) on laptop Studio 1749?

  If I add an Intel N 6235 card to a laptop Studio 1749 he will support WiFi Direct?  Does rely on the particular spec of the 1749 individual and if so how can I check?

  TIA,

  Mike

  Open Device Manager in Control Panel.  If you see a listed card ATI or Intel, you have discreet video that will not support WIDI.  If you see an Intel graphics card, you should have the WIDI support.