Thermal solution compromised - reboot and replace the cover. -Message
Hi I get this message when I turn on my computer. It is right after the bios screen.
"Thermal solution compromised. Replace the cover and reboot.
How can I solve this problem. The fan eventually go very fast and very strong if I continue to use the computer, after I get this message.
It has done this 2 weeks ago and I've changed the "case untrusion" setting in the bios to "off" and it seemed that he solved the problem, but now it started again. I have not opened the case in a long time and have not added new hardware in a good 6 months.
Should I try unpluging the switch of the motherboard or is it a bad idea?
I use the Dell Precision T5400. BIOS Version A05
The things I checked are:
-The cover is on.
-My tempature CPU 32 to 34 ° C is only normal (I have two processors, but did not hit their all a good year or two)
-There's only one fan in this unit and it seems to run properly.
Thank you
Hi yes I have repaired!
I bought a new switch chassis and have not had the problem since. You will not find a new one, but renovated should be there.
I tried to get it by Dell but it kept out of stock for weeks which was inconvenient so I ended up getting through someone else.
I remember most when I bought it since? I think I just googled my switch model and chassis DEll and it came somewhere.
Good luck!
Tags: Dell Desktop
Similar Questions
-
Satellite A30 921: how to remove and replace the memory?
Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.
Thank you in advance.
Hello
There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5
Good bye
-
I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?
Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.
So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.
I hope that clarifies the doubts...
-
Question
I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same messageSee:
-
Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result. It worked fine yesterday and has not been moved since then. What should do?
Check the sources of the system/preferences/keyboard again. You have active the British PC keyboard. Remove it and make sure that you have only on the list.
-
I spilt a drink on my keyboard and now I can not turn off the caps lock and a number of keys does not work. I need instructions on how to remove and replace the keyboard frame. Thank you.
On your page of support-look for Maintenance and Service of Guide in the manuals.
-
Search and replace the string formatting
Hello
I try to do a search and replace the formatting of a string.
In the example, I'm looking for the string 'SUCCESSFUL', but it must also begin by usbflash and some number + PASSED.
I can't get the format to have a number between 1 and 99. The number of replacements should add up to 6 in this case. I tried with \d for any number, and I also tried [1-99].
Make a right-click on the function search and replace the string. There is an option to use regular Expressions. Then give it a try.
EDIT: You need to set the entry replace all to TRUE.
-
How can I download and replace the fonts directory in the folder Windows for Vista
Separated from this thread.
How can I download and replace the fonts directory in the folder Windows for Vista?
I think I have a corrupted font file, but I don't know which.
Thank you
George Criffield
Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here). I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.
-
Steps to remove and replace the keyboard. HP Pavilion dv7-1448dx
Hello. I have HP Pavilion dv7-1448dx. I have not available a manual where the path is directed to change the laptop keyboard. I need help to get the steps to remove and replace the keyboard. Please provide me with the support as soon as possible so that I can solve this problem. Thank you.
Click above. We are not HP, all other users trying to help.
-
I moved some images in a folder, some of the images already in the folder had the same name as the new scanned images IE 1 Scan, Scan 2 etc. I used the move and replace the folder without thinking that I was in a hurry. I still need replaced images but now I can not find them I thought that they would have ended up in the trash, but they aren't there?
You can download some like this free data recovery software to recover deleted files.
1 panda Recovery http://www.pandorarecovery.com
2 recuva http://www.snapfiles.com/get/recuva.html
3. undelete more http://undelete-plus.com/
How does it work?
When you delete a file on the FAT32 or NTFS file system, its content is not erased the disc, but only the reference to the data file in the file Table of Allocation or the master file Table is marked as deleted. This means that you might be able to recover files deleted, or to be visible through the file system again.
-
G61 does not illuminate unless I have remove and replace the battery.
Even when the power cord plugged in it will not light. If I remove and replace the battery it lights mode battery and AC. At the same time my HP Support Advisor and HP s Advisor "stopped working".
I restore to a previous point, no help. Downloaded a new HP advisor, ho help.
This happened after the recent big WIN7 updated. Help
Hello
In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator". In at the prompt, type the following command and press ENTER.
sfc/scannow (Note that there is a space between sfc and /)
Let the entire process, then the output type and press ENTER. Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.
Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here. When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again. Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.
Kind regards
DP - K
-
How to have all audio playback with headphones and replace the speakers
headphones and speakers - interface
This is probably a stupid and basic question normally, I'd be embarrassed to ask. But I'm old enough not not to be bothered much more. I would like to have all the sound elements come through the headset and replace the speakers. But when I plug the headset comes through both. It worked fine a few days back, but not now. Help! Please, I beg you!
Hi pam1948,
Here are some steps that you can follow and check if they help you in fixing the issue:
Make sure that the headset is set as audio device by default.
To do this, follow these steps:
1. click the Start button, select Control Panel, click hardware and soundand then click sound.
2. click on the read tab.
3. select headphones and then click set as default.
4. on the playback tab, select the playback device, click set upand make sure that the configurations are set correctly.
5. click OK to save your settings.Kind regards
AbdelouahabMicrosoft Answers Support Engineer
-
Using PowerCLI, I'm trying to create a script that logs off the CD player and affects the client machine and Passthrough IDE using the command:
Get-cddrive - VM SRVVM616 - netscan02.kb.se | game-cddrive - nomedia - confirm: $false
* (where SRVVM616 - netscan02.kb.se is the VM name in this case)
But I can't get rid of an audit question that arises in vSphere Client:
'The guest operating system has locked the door of CD-ROM...
Unplug anyway and replace the lock? »
The script hangs until I answered the question, and who does the idea of a useless script?
How can I avoid this issue?
Maybe the method I described in answer to the question! could help.
-
Find and replace the delimited string value by the
Hi all
I have a requirement where I need to find and replace the delimited string values.
For example, the string is "GL ~ 1001 ~ 157747 ~FEB-13~ CREDIT ~ A ~ N ~ US ~ NULL ~". The 4th column gives the month and year. I need to replace it with the name of the previous month. For example: "GL ~ 1001 ~ 157747 ~JAN-13~ CREDIT ~ A ~ N ~ US ~ NULL ~". I need to do the same thing for the past 12 months.
I thought initially divide the values and store it in a variable and then after him substituting the value required, join the return.
I just wanted to know if there is a better way to do it?
Like this:
with a model like
(select "GL ~ 1001 ~ 157747 ~ FEB-13 ~ CREDIT ~ A ~ N ~ $ ~ NULL ~' double UNION ALL data")
Select ' GL ~ 1001 ~ 157747 ~ JAN-13 ~ CREDIT ~ A ~ N ~ US ~ NULL ~' double data)
Select
REPLACE (DATA, TO_CHAR (to_date (substr (data, 16.6), "MON-RRRR"), 'MON - RR'), TO_CHAR (to_date (substr (data, 16.6), "MON-RRRR")-1, 'MON - RR'))
modeling;
GL ~ 1001 ~ 157747 ~ JAN-13 ~ CREDITS ~ HAS ~ N ~ US ~ NOTHING ~
GL ~ 1001 ~ 157747 ~ DEC-12 ~ CREDITS ~ HAS ~ N ~ US ~ NOTHING ~
Ishan
-
A Script to find and replace the layer names
Is there scripts to find and replace the names of layers?
There is an excellent script available for Photoshop that allows you not only to replace words in layer names, but also insert words as prefixes, Suffixes and sequential numbers.
The version of the illustrator of this script allows only sequential numbering: it does not offer search and replace words.
Ideally, it would be great if there were something that could find multiple and replaces in a go:
(for example
You have layers like this car, the dog, the bat
You enter: because (Option1), dog (Option2), Bat (Option3)
Your layers become then: option 1, option 2, Option3).
)
Big_SmiLe, which is a very good start! Step 1 of learning how to Script is indeed, by adjusting an existing simple script to make things more complicated. (And usually then "break something", which is also a necessary part of the process.)
You are right your comment, it comes to repetitive things. For one or two different articles that wouldn't be a problem, but in the longer lists you are soon lost.
As usual to work with lists of search - replace is to build a table:
var layernames = [ [ 'FHairBowlBoy *Hair', 'Hairboy1' ], [ 'FHairCurlyafroBoy *Hair', 'Hairboy2' ], [ 'FHairSpikyBoy *Hair', 'Hairboy3' ], ];
The general idea is to loop through all the names, check if the current layer name is "layernames [i] [0]" (the left column) and if so, rename it "layernames [i] [1]" (the right column). If you know how to write a loop in Javascript, then you can implement this immediately.
However...
A more advanced method to do this didn't need even loop on all layernames - instead you can immediately 'get' the correct name by layer! It's magic! Almost!
The trick is to use a Javascript object rather than a table. JavaScript objects are nothing special; "Layers" of Illustrator are an array of objects, and each object 'sex' has a 'name' property, which you can read and set the value. What I do here, is to create a new object, where the part 'name' is the name of the original layer and its value is the name of the new layer. All you need to check each layer is if there is a "object.originalLayerName" property and if so, assign its value to this layer name.
It looks a bit like the table above, except that (1) you use {.} instead of [..] to create an object and (2) you add pairs "name: value" instead of 'value' only (in fact, the 'name' of a value in a table is simply her number).
So here's what it looks like:
// JavaScript Document var doc = app.activeDocument; // name indexed object var layernames = { 'FHairBowlBoy *Hair':'Hairboy1', 'FHairCurlyafroBoy *Hair':'Hairboy2', 'FHairSpikyBoy *Hair':'Hairboy3' }; // loop through all layers for (var i = 0; i < doc.layers.length; i++) { //Set up Variable to access layer name var currentLayer = app.activeDocument.layers[i]; if (layernames[currentLayer.name]) { currentLayer.name = layernames[currentLayer.name]; } }
Enjoy!
Maybe you are looking for
-
Could not find the option to import bookmarks into Firefox 7
I want to import my Internet Explorer Favorites. Firefox Help said that there is an option called "Import" in the menu drop down "file". This command does not appear in my newly installed FF 7.0b2. I also took "Import my favorites" during installatio
-
Satellite L750D and video driver
Hello I have a Toshiba Satellite L750D currently runing on fresh installed Windows 7 Ultimate 32 bit. I have problem with the video driver - tried all avaiable for this laptop, but didn't fit any of them. Please help me because using Notepad with not
-
Equium A60-199: audio and video control buttons not working not
Audio and video control buttons used to work for windows media player, but now they are not, I wondered if I had pressed or something changed by mistake, or maybe I need to take it to be fixed? Help, please.
-
Hello I can't print color green. It prints a blue version instead. Any suggestions? Tasos
-
I downloaded Norton online upward and can, t run it tried for 2 months, s rpet incompatible application