running norton back up online

Similar Questions

• How to lock my bookmarks toolbar in Firefox 13.0.1 so that it is not removed when I run Norton Utilities?

  When I run Norton Utilities my bookmarks toolbar is deleted. When I replace that left Favorites icon is not there, which is a nuisance that I run with the bookmarks bar in place on the left side of the screen. So having replaced the personal bar, I then to customize by dragging the bookmarks icon and then click on this icon to retrieve my bookmarks sidebar.

  You really do not have this icon of bookmarks, {Ctrl + B} opens and closes the bookmarks bar.

• Satellite A30 stops when you run Norton

  Hello. I have a Satellite A30 which crashes when trying to run Norton.

  Spec: Satellite A30, Win XP Home SP1, 512 MB RAM, 3 + Ghz processor.

  We also noticed that the fan seems to be "fully enlightened", even when he's just sitting on the desktop with any of the applications that are running.

  Any ideas?

  We noticed that there was a notification for install of XP SP2, so we clicked on that. He started to install, the fan is even harder, it crashed again and now there is no notification of XP SP2!

  We are sure that this is a problem of overheating or battery, but we wonder what we can do about it.

  I hope someone can help. Thank you.
  Nath.

  Hello Nath

  As far as I know that satellite A30 is about two years old and agree to your description, I assume that the unit needs to be cleaned. I have Satellite P20, also more than two years, and for a short while I cleaned. You can't imagine how much dust was inside. I have a cat at home and I think half of the cat hair was inside.

  After cleaning, the laptop can take a breath and it works more silent. Now, I am very satisfied. I can just recommend you to do the same.

  Good luck!

• Whenever I run Norton power (NPE) gum, this "rikvm_06A08EA1.sys" was released as a malware.

  rikvm_06A08EA1.sys

  Whenever I run Norton power (NPE) gum, this "rikvm_06A08EA1.sys" was released as a malware. Despite all efforts to get rid of it, this continuous malware appears each time I run the NPE. I ran the Windows security program, and he did not find this malware. Later, re-, I ran the NPE, and the malware was found. What should I do? Thank you.

  Contact support Symantec.com.

  http://www.Symantec.com/index.jsp

• Issue user account controls? message "resource loader cache not have loaded MUI entry" you try to run Norton System works on cd with UAC.

  I am running vista Home premium, upgraded from xp. I can't run norton system works setup cd with controls (UAC) user account enabled and on. I get the message "resource loader cache has no load MUI entry" I can run from cd with disabled UAC and offshore. What should I do to fix this?

  Hi David e. Sunderland

  Method 1
  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651/

  Method 2
  You can try to install the program to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3
  Run the Norton System Works as an administrator and check if it helps

  How to enable an application to run once with a full administrator access token in the UAC?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

• ERROR: The action window says: "NO ACTION is AVAILABLE" while running Norton 360 'Difficulty now' utility in the Windows Vista-based computer.

  Original title: registry cleaning.

  Norton 360 has an Amber 'FIX NOW' on registry cleaning, but when he finished a result message appears "ERROR".

  The window for action says: "NO ACTION is AVAILABLE!"

  So what is the solution to this you problem.

  I also tried "RUN CHKDSK" for example. type cmd then ok followed by "chkdsk c: /f /r.

  Now I get ' ACCESS DENIED AS YOU DO NOT HAVE the PRIVILEGES SUFFICIENT. YOU HAVE TO INVOKE THIS UTILITY

  RUNNING IN ELEVATED MODE '?

  Hi BRIAN,.

  (a) I suggest to uninstall Norton temporarily using the removal tool.  You can download & run the Norton removal tool to remove Norton completely from your machine & see if the problem still occurs.

  Download and run the Norton removal tool to uninstall your Norton product

  (b) later, reinstall the Norton software.

  You can also contact Norton support to obtain assistance.

  Hope the helps of information.

  Please post back and we do know.

• How to get back my norton toolbar? Just downloaded 7.01 and want my norton back toolbar

  How to bring back the norton toolbar? Just installed firefox 7.01. If you guys cannot support the security number one tab, I'll switch to another browser!

  Norton has released a fix for compatibility on 27/09/2011, the same day Firefox 7 came out: http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-7-0-Compatibility-Patch-is-now-available/td-p/547384

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I bought Norton virus 17 Jan 2012.Norton 360 v5 online. It is not loaded on my computer. Please respondMy anti virus is exhausted.

  I bought the Norton software * software Norton.com/nsca $72,91 online

  Contact Norton Support: http://www.vnsupport.net/Norton-support.php

• Confusion with priority BIOS after running Norton Ghost.

  Years ago, I had done a fresh XP install on a 75 GB Seagate hard drive. I have an old Maxtor drive of 25 GB the first connection on the Ribbon of the IDE and the Seagate is the second link on the same Ribbon. I have updated the BIOS to boot from the Seagate.  Performance lately on the Seagate has not been good, so I decided to start from scratch. I did a fresh install of XP on the Maxtor and everything is saved for this drive. Subsequently, I deleted the partition of Seagate and used Norton Ghost 9.0 to copy the contents of the Maxtor to the Seagate. Then I changed the priority of hard drive BIOS so the computer would be of the Seagate. When the computer is first started after the copy, I got a blue screen which took place from the disk check. Subsequently, it seemed to boot from Maxtor, thanks to the constant ROAR. The Seagate is quiet.
  In addition, when I opened up under administrative tools computer management, the Seagate drive appears as drive D rather than C. I was confused so I saved a file on the desktop to confirm which drive has started. The resulting file saved in D:\Documents and Settings\... folder.  It makes no sense to me.  Why does the computer start to the Maxtor with the Seagate with the priority in the BIOS? In addition, since he did start the Maxtor, I do not understand why the file was saved on drive D instead of C (Maxtor) (Seagate). Remember, I had the same hard drive and BIOS before configuring backup and run the ghosts and files were copied on the disks expected during the priming for the Seagate.
  Does anyone have an idea what is happening?

  The BIOS follows it of own rules to choose which drive start.
  Once he locates the starting tips for, then turns the Windows.

  Windows (XP) also gets its own way to begin - so you must be sure that it's boot sequence is correct.  I got a new SATA Raptor drive which was starting slow as molasses - until I found that the system was booting from the old IDE drive before he transferred control over the fastest SATA drive that Windows has been installed on.

  Finally, other programs have different ways to determine which drive they use.
  Add a copy of a disc (using Ghost) can keep registry settings for different drive specifications.

  IMO, on a XP system, you must have 1 player who put in shape to boot from.  The rest should be just the storage drives.

• Get the message when running Norton - OS file system error (C :), advised stopping and restarting,)

  Original title: what is system problem Partition OS operating system error (C :) file)

  get the message when Norton - OS file system error (C :), recommended stop and restart running, did not help)

  Hi catherinegood,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem? Hope this information is useful.

  This is error occurs when Norton scan, then you can check with Norton and check:

  Check the link for the support of Norton:

  http://securityresponse.Symantec.com/Norton/support/contact/contact.jsp

  http://www.Symantec.com/support/index.jsp

  If you try to run a scan, you can check out the following link and try to download the Microsoft Safety Scanner and analysis complete on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Check out the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this information is useful.

• How to run a BACK 16-bit based program under Vista

  Original title: back based progamme
  conducting a program of CAD old back, but when I execute execute sequence window flashes upward, then disappears, do not get enough time to read what he said. How to run a 16-bit program back under vista? is it possible to run a program of back under vista. I'm kinda a noob so keep it light wieght for me...

  Hello

  Windows Vista does not include a 16-bit subsystem. So, you will not be able to run 16-bit applications on Windows Vista directly. However, you can install Virtual PC on your
  Vista computer and then you can install Windows XP on your virtual PC to run 16-bit applications.

  You can download Virtual PC for Vista from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Virtual-PC-2007-run-multiple-operating-systems-without-multibooting

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows Vista and when running Norton 360, they said that I had in somee virus in my backup files. How can I remove them?

  I want to delete old backup files. Some of these files have a virus in them. If I completely delete these files and run a new backup it will accomplish what I want.

  I asked a similar question on the removal of all my backup files in my hard drive external and asked if I would get a full file backup or just backup incemental.
  I asked this question to Windows Vista, IT Pro.
  The answer is:
  Windows uses something known as bits archive to determine if changes have been
  to files.if you completely delete the contents of the backup media, then it should do a full backup has the following appendix, because at that time, windows has nothing to compare data from the computer with.

  Based on the response I received, you should have a backup of files complete "sound".

• Qwest Norton Anti Virus online vs MSE or AVG?

  I just changed to century link for internet. I have AVG and MSE. Norton wants to remove these. Which is better to keep?

  Welcome & thank you for your comments.

  PS: There is a very good chance that AVG is not installed or not working properly!

• Cannot run Foxpro back based program in Windows 7

  I have the file executable foxpro (dos) based, but I could not run the same Windows 7. Kindly help

  It will not work on Windows 7.  Probably, it will not work on any Windows NT based, such as Windows 2000, XP, or Vista either.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Laptop computer shows BOOTMGR missing after running system back to factory State

  I have a HP Pavilion Entertainment notebook model #dv7 cl 3163. First of all, I must say that I am a beginner user. My problem started with a low battery problem. Then, using recovery mgr. I first ran to the top of disks and then tried system restore. During which it stops. When I tried to restart it initially said something about starting like new from the factory. Then it said could not load the windows program. I contacted hp and tech had me buy a phone holder 1 year plan. Had me then go th the Recovery Manager and select restore to the original image. During which he gave this message. Recovery Manager cannot restore computer using the fzctory image. Please contact HP support. 0xe0ef0003 error code. He said that meant, that I need a new hard drive. Now when I turn it on it says BOOTMGR missing. Use ctrl del apt at the beginning but who doesn't. It doesn't do anything. The technology would be good? Is there a way I can check my drive first? Or another way to tell? It was not the original problem so I am not confident in its determination. Should I be?

  Immediately after turning the power on, press the ESC key. This should bring up a menu which F2 is what you choose. Use Diagnostics to test your hard drive.