These last poster tasks 'Decision-making machine virtual screenshot' followed by 'delete file '.

Similar Questions

• Why would I be able to access the files on a machine virtual of CMD but not file Explorer?

  I had a problem that goes back, I think that all the way to when I installed Workstation 10...

  I can access the shares on my Windows 8.1 host system via Windows networking from inside a computer virtual 8.1 Windows without problem.  And I can access actions in the virtual machine of my host via a CMD window, but I can't access the virtual machine to the host through the file Explorer:

  
  

  Why?

  -Christmas

  I have at the bottom of this problem and write the solution here for the benefit of third parties who may run across this thread.

  I have a tool called WebDrive that allows me to map network drives as FTP sites.  He had destroyed the normal to a registry value content when you add itself as a provider of network to explore.

  The key and the value that Windows Explorer needs to establish network connections are:

  Registry Info
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\HwOrder] "ProviderOrder"="RDPNP, LanmanWorkstation, webclient.

  In my case the tool WebDrive, rather than add the WDNP32 entry to this list, replace entirely the list.  Restoration of the above re - enabled me to access the data in my virtual machines via the Explorer of files on the host computer.

  -Christmas

• machine virtual Windows 7 for xp, files became broken in xp

  Load Rockwell software to Virtual XP and after addition of XP updates for windows that it wiped out the files. Now I can't find the files that were loaded, I did a search, and windows cannot find files, even in deleted files. Where are the files stored in XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/XP-mode-restart-problems/53c27594-A212-49B2-887a-04c7a58aa118

  read James's response and ask your question on the link he provided.

• Cannot start area Planner and the server process in the machine virtual App/lot

  Hello
  
  After the change of /etc/tnsnames.ora in the machine virtual App/Batch:
  
  [Psadm2@psovmab LOG] $ /etc/tnsnames.ora more
  H91TMPLT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.133) (PORT = 1521)))
  (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = H91TMPLT.corp.peoplesoft.com))
  )
  
  I can't start Task Scheduler field and the server process:
  
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 197 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 198 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)

  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 793 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec BBL - one:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 773 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 495 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  Try to start...

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 801 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSWATCHSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSWATCHSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSQRYSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSQRYSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSAMSRV o ./LOGS/stdout e ./LOGS/stderr - A - APPDOM d s PSSAMSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKHND o EI ./LOGS/stderr s PSBRKHND_dflt:BrkProcess - APPDOM d s PSBRKHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKDSP o EI ./LOGS/stderr s PSBRKDSP_dflt:Dispatch - APPDOM d s PSBRKDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBHND o EI ./LOGS/stderr s PSPUBHND_dflt:PubConProcess - APPDOM d s PSPUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBDSP o EI ./LOGS/stderr s PSPUBDSP_dflt:Dispatch - APPDOM d s PSPUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBHND o EI ./LOGS/stderr s PSSUBHND_dflt:SubConProcess - APPDOM d s PSSUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBDSP o EI ./LOGS/stderr s PSSUBDSP_dflt:Dispatch - APPDOM d s PSSUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSMONITORSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSMONITORSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JSL o ./LOGS/stdout e ./LOGS/stderr - A - d - m 5 - M 7 - //hrapp.xflash.com:9000 I have 5-j ANY - 40 x 10 - c 1000000 JSH w s:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JREPSVR o ./LOGS/stdout e ./LOGS/stderr - A - W Pei /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 774 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  
  Thank you

  Please, once you connect to the application server Peoplesoft VM with psadm2, run the following:

  env|grep LANG
  

  And post the result.

  LANG should be C, if this isn't your side follow these steps:

  export LANG=C
  

  And re-start the Appserver field.
  To keep consistency during the startup of the server, add the line in the psadm2 user .bash_profile.

  Changed the .bash_profile or any other initialization file? Because everything should be fine by default.

  Nicolas.

  Published by: Gasparotto N on December 30, 2009 19:09

• Machine virtual Windows 7 - freezes\reverts of the screen when going from Windowed to full screen and vice versa.

  I use a Win7 box with a Machine virtual Win7 on it.  When I started using the VM, it should start and login and work very well.  Shortly after I started having the following problem.  It loads in windowed mode, so I me the welcome greenish\blueish after cutting inside.  If I wait for the Office to load, when I do the full VM screen, it goes full screen then the screen goes to the Welcome screen again, but it's just a static image.  It won't change until I have send a Ctrl-Alt-Del command.  Can I get the normal window with options for logging, start the Task Manager, etc..  If I press ESC or click Cancel, it will show the office and I can work on it without problem.

  If I leave full screen mode windowed after that, the same thing happens, except instead of the Welcome screen, I get the screen of Ctl-Alt-Del as a static picture.  Once again, if I send the Ctrl-Alt-Del command, then cancel, I get the office as usual and it will work until I have try to resize the screen again.

  Can someone help me understand what is happening?

  Thanks in advance,

  Joe

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  Hope this information helps.

• Resumption of the Suspended virtual machine does not work, "the specified file is not a virtual disk.

  Resume a Suspended computer virtual fails with the message "the specified file is not a virtual disk. Tried to go back to the last snapshot fails with the same message "error restoring snapshot: the specified file is not a virtual disk '. '"

  The virtual machine has worked without delivers up to 21/12/2015 while she was snecessary. I often suspend > resume this machine virtual, but for some reason, I am now getting this error. Please help!

  The file unfortunately doesn't look very promising. It seems that the contents were crushed,

  Unless you have a backup, you can try to replace this file with a file 'empty' hard (e.g. copy Windows 7 x 64-000002-s100. ) ( vmdk) that contains only metadata (size = 327 680), to see if this allows you to use the virtual machine again. Note that you will lose all the data stored in the (corrupt) original hard file, and that the virtual machine will probably suffer file system errors. So make sure that you run chkdsk for all partitions in the guest OS.

  In any case, before doing so, I strongly recommend that you back up the existing files of the virtual machine! Once done, it could also be a good idea to run chkdsk for physical training.

  BTW. do you need all the snapshots? With all these clichés and the size of the virtual disk of the virtual machine, the virtual disk consists of files hard ~ 400.

  André

• Stretch machine virtual windows on two monitors

  Stretch the window machine virtual windows XP mode across two monitors.

  Windows 7, videocard, NVIDIA G Force 210, two ASUS 23 "monitors a VGA the other DVI

  I can stretch the other windows like adobe reader across two monitors, but the XP virtual machine window can be extended a bit bigger than a monitor. Virtual machine window can be passed a window to each other very well... just not expandable wide two monitors.

  It would be useful for a program of CAD drawing two pages visible at the same time.

  Thank you

  Hello

  The question you have posted is limited to Windows XP Mode and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

• Help! OUTPUT AUDIO BACK DECISION-MAKING DOES not!

  Hi, I have a problem with my AUDIO OUTPUT device. I use a M2N68 AM PLUS Asus MBord, all sounds drivers are updated and works OK. but my problem is that I don't hear anything from the speaker. Notification of speaker level icon is bouncing up and down and detect sound but not the speaker output. Another thing is that my DECISION-MAKING of OUTPUT AUDIO BACK not detect plugged or disconnected devices. My realtek on that HD Audio Manager of PANELS of OUTPUT REAR are blurred and only the FAÇADE are active that does not work as well. I hope someone can help. Thank you!

  Hello

  1. If it works well before?

  2 did you change on your computer before this problem?

  3. you receive an error message?

  You can try these steps and see if it works very well.

  Step 1

  I would like to you can check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click on start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set to mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access Control Panel

  2. click on its

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on Properties

  6. Select the tab improvements

  7. disable all improvements

  Step 2

  Try to perform a system restore and see if it works very well

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3

  If the steps above don't you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard

  It may be useful

  Concerning

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• 'No operating system found' when you create the new machine virtual de DVD

  Hi, I had problems with the creation of a new machine virtual (Server 2008 R2).  After the initial creation, I turn on - then starts immediately to the network.  I tried to change the boot order in the BIOS and even removed the NIC via Virtual Machine properties.  I built VMs repeatedly using this method.  I use an ISO DVD that I know, I created works.  I select "connect to E:\. "that is my DVD drive on my laptop and have restarted (loses connection every time the DVD player).  I even changed the type of E1000 VMXNET3 network adapter - makes no difference.

  I feel good and truiy perplexed!

  Any ideas?

  You can connect the ISO remote only when the virtual machine is running.

  I suggest you set a delay (or get into the BIOS), in the property of the VM, press ESC during POST to enter the Boot Menu, select CD but wait to confirm.

  Connect the ISO and now start to begin.

  André

• "the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01

  All,

  Shadow protect IT edition allows us to create backups of image files from our servers. We need the ability to convert files Shadow protect (SPF) in VMWare Server 2.x. files about half of our servers do not convert. We get a message that says: "the machine virtual source is not recognized. What gives? I know image backups are fine because I tested.

  Any help would be appreciated.

  Thank you.

  vmnoob

  We support only a few specific versions of ShadowProtect.

  > StorageCraft ShadowProtect 2.0, 2.5, 3.0, 3.1 and 3.2

  There may be additional restrictions when you attempt to use these types of files, such as the following from the Manual:

  1. dynamic disks are not supported.

  2. all the images in the backup of a machine must be in a single folder, without other images placed there.

  3. for incremental images, so 16 incremental backups are supported.

  4. images of systems with logical drives are not supported if the logical drive is also a system or an active volume

  5. for volume-based cloning, all volumes on the disk until the active devices and the system must be saved.

  5.1 for example, if a drive has four partitions, 1 to 4, with the partition as the active volume 2 and partition 3 as long as the system volume, the backup must include 1 to 3 partitions. (ShadowProtect only).

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• How can I stop the last post showing when I want to send this person a new Imessage.  I have an Iphone 5s

  How can I stop the last post showing when I want to send this person a new Imessage.  I don't want an old conversation appears constantly when I am a Messenger contact.  I have an Iphone 5s

  I don't know, but let me see if I understand what you're asking. You do not want to see the thread you have with a particular contact when you go to send them another message? The only way to do this is to remove the previous message thread. If you send a message to someone that you already have a thread of conversation with, it will continue to post in this thread. There is no such thing as having multiple threads with the same person. All conversations with the same person would remain in the same thread, unless you remove the previous discussions. If you delete your previous conversation, when you go to start a new conversation, he won't have any of the other answers.

• Microphone on HP Jet 7 decision-making

  What the Jack for a microphone in the stream Hp 7?

  I'm trying to use a cast IRig mic which has a 3.5 for the audio output and microphone jack to and does not work, so what type of decision-making should the microphone works fine on the 7 flow?

  Hi, thanks for your quick response.

  The external microphone is working correctly when it is connected to the Jack, but Windows does not detect as a new device. Casting TheiRig mic works fine, but with a very low volume.

  Thanks again. solved it for me.

  Tololino

• tables that the decision-making process

  Hello

  I have a list of tables that must be used as input for decision making. attached are the VI and the input file. What is the high_data > 10, it must perform the square root which is under the real condition. When the high_data is less than 10, it should return zero which is false conditional. I tried to use the Chooser of the case, but it seems table cannot be used for the selection of cases. Can someone help me with this. Thank you

  First of all, you have the race condition because of the flagrant overuse of a local variable. Most likely, the local variable is read before the terminal of the table gets valid data. Remove the local variable, and use a wire directly. Do not forget, LabVIEW not Executive up and down or left to right. The order of execution is entirely determined by single dataflow. If you have multiple processor cores (and you probably have), things can even Executive in parallel.

  Second, have you tried simply to encapsulate an autoindexing FOR lop around the structure of matter? Then clean the proof of the scythe, which needs a scalar instead of an array, etc... There are also solutions without loop, but let us in to the essential.