ThinApp Side by Side say it

Similar Questions

• My windows live mail and messenger the two side by side saying configuration is incorrect. How can I fix it?

  I tried to reinstall Windows live but same thing happens when I try to access

  See articles (below) in the Windows Live Solution Center to find errors "side by side configuration is incorrect".  FYI... This error message can be the result of one or several different problems.

  http://windowslivehelp.com/thread.aspx?ThreadId=2df15f35-8362-420e-8e57-7464df3d7460

  http://windowslivehelp.com/thread.aspx?ThreadId=12130929-ce5b-4CE9-B099-a73350166872

  http://windowslivehelp.com/thread.aspx?ThreadId=aaf1baa6-4bb6-4BF6-92ab-4e0d6bda53d9

  http://windowslivehelp.com/thread.aspx?ThreadId=4d5265a6-33f0-4d1f-9999-8822211052a6

  .. .Winston

  MSFT MVP Mail

• Side of Backgammon of MSN (games won and lost)

  My side says I played 3 matches, won 1 and lost 0.  But in 2 games my opponent disconnected and I thought that this would result in an automatic victory.  So my rating should not indicate 3 wins, 0 loses.  And why doesn't he fit? played 3 games, 1 win, zero loses only adds up to 1.  What happened to the other 2 games?

  Can someone clear this up for me?

  Thank you

  Should PS why people be sports bad when they lose?  It's just common widower to resign rather than disconnect brutally because it seems to me that I get no credit for these games that I had to finish with the computer opponent and the computer is a ugly backgammon player!

  Hello

  The question you posted would be better suited in the MSN Games forums.

  http://zone.MSN.com/en/support/article/supporttoc.htm

  http://zone.MSN.com/en/support/article/support3500.htm

• Virtual paths in a ThinApp project

  Hi all

  I am a beginner ThinApp. So far, I created a few test "ThinApps" and I can say that I will love it! It is very simple and flexible...

  But I have a few questions to you pros:

  How can I know what are the paths physical target of the virtual paths to my system where to start the virtualized application?

  If I start a command prompt in the virtual environment and the context (point of entry) I could solve these virtual paths, for example SystemSystem % %?

  Could I create/add custom virtual paths in the project file before that I build the virtual application?

  Thanks in advance

  Alex

  pbjork has answered this right as always

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Client in Stress

  First I'll say I know first-hand that sarcasm and being generally rude via a forum will not be problem solved faster, but I feel violated by Toshiba and 3rd parties and forced to post

  Lets start at the beginning, this is usually the best place.

  On 2008, I bought a Toshiba, being a 3D artist, I thought it would be a good investment.
  But unfortunately, I was wrong.

  Bought from PC WORLD GLASGOW - 450 GBP "just for geographic reference.

  Once I had opened the new box of shinny and carefully unpacked the dangerous contents, I turned on my laptop with impatience...

  Guess what?

  dead on the side, not the top but in the Middle 3 pixels.
  Now you can understand my concerns being a graphic artist, but this problem was quickly resolved "after a huge fight with PC world because it was political generative Manager for today.

  "You can not return except if she had 5 or more dead pixels"

  "WRONG ANSWER MY FRIEND.

  OK, so excellent that they exchanged, after that I got to spend another GBP 50 for an improved version, because they did not have in stock!
  So actually I got another machine that I didn't go for the extra money...

  OK so I get this machine at home, TOSHIBA SATELLITE A210
  Everythings fine and dandy for about 1 week

  (A) DVD PLAYER

  -At first I noticed the player acting funny, reading discs then no not reading them he lost all functions except the ability to read, ok no problem I have a PC at home that can burn discs, I'll let that one slip.

  (B) PAINT FLAKE
  paint on front panel "where the lights are" starting to flake off and fall.

  -Ok, I'll put that up to wear but its still only a month old

  (C) MORE than HEATING (MEGA) burned my arm of girls.

  -As I mentioned above I have do graphics, this machine is mainly intended to browse the internet, maybe a few docs world, does not make the 9 million presdec, I quite understand this concept.

  but it has started to overheat, I speak not a little hot, I mean completely illuminated, that much you can cook an egg on. not only by the machine, but also the power supply. remembering this machine is always less than 2 months.
  The heat was intense it burns a rectangle perfect on my old girls arm of 3 years.

  -discuss with my wife not to sue for defective and dangerous appliances I phoned customer service and spoke to a very nice gentleman who was happy to help.

  Excellent laptop get picked up and taken to get fixed - SEE NOTES of CUSTOMER SERVICES.

  I was as considerate as I re-formatted the machine and all the essential tools on the desktop, you know the Control Panel, system settings ect. and even made a nice jpeg scheme where the faults are "because I know how off a pain in my teeth, it can work on the side of the tech and anything I can do to help"

  1 or 2 weeks later I get my phone recently renovated.
  Great, or so I thought...

  Jump forward 6 months later, just before the manufactures warranty runs IRONICALLY.

  Inbetween random defects and the paint starts to fall AGAIN,
  The machine begins to put his self randomly turned off! without prior warning.

  «Ok, maybe it was just an anomaly of the system, I will restore.»

  Nope, still do, maybe it's the battery with do not load and it's hard to detect it?

  Nope its still cutting...

  I would add also after the return of the unit, which, in my professional opp "YOU JUST REPLACED THE SHELL AND BLEW THE DUST OFF. S ' POST CUSTOMER SERVICES NOTES PLEASE... "maybe I'm wrong?

  Now due to the machine randomly switching it's self it caused massive corrupt sectors and chkdisk and data loss errors. "some of it has been costly, but functionally, I'm a spice smart I managed to save MOST of the data.

  OK, so not a problem, it's getting old (1 year and 3 weeks to be exact), its usually used for Internet, theres some work and some personal pictures, nothing that's going to rock your world.
  I'll use it for that.

  OVERHEATING AGAIN:

  Now, this can be caused by dust, also quoted by one of your ignorant employees.

  !!!! but this was caused by another product mass-produced, shipped quickly and roughly, lack of safety of the product user tests...

  HOW CAN I KNOW THIS:

  Mainly because when you Google Toshiba A210 he hits 3 million user flaws / problems
  "Excuse me to look like one of your tech guy, but I used the google search string to legitimate research.
  and the proof is there.

  OK so its overheating, this is maybe why it keeps cutting out? Not a problem, not until today.

  "Sorry it took so long to get here."

  So, today, my daughter "now 4" plays on the homepage nickjnr "carefully avoiding the hot lava pours heat wind on the side, that it cut again...".

  GoTo switch back on

  ' A method that we now call "PULL THE PLUG OUT AND SWITCH ON AND OFF 5 TIMES, STAND ON 1 LEG & PRAY..."

  and upward displays this

  

  some of you may have seen it before...

  THIS IS CAUSED by the bad programming and bad development

  BIOS:

  Its called BIOS lock "and yes I tried, TOSHIBA, ADMIN, 12345678 blah blah blah" effectivily machines decides encrypt, or perhaps not to encrypt a password, all depends on how he feels this day here.

  Toshiba know this flaw and offers a fix ##maybe priced, everything depends on what the sales rep you get #.

  That's the whole point of the conversation so if I lost you with bad grammar / spelling at any point in the post please PAY ATTENTION this is the IMPORTANT PART.

  I looked for means of brute force, fix, remove the battery and so on when I decided that enough was enough, this machine is defective. I'll give the legalese here just to let you know where on the same page.

  The Sale of Goods Act 1979 amended

  The goods must be:

  -the objectives they are made to
  -Security
  -durable - last for a reasonable period
  n ' have no minor flaws
  -taken in charge in the look and finish

  There are others if you want to keep me, better yet, but I'll just use this one right now, just to be polite.

  Your PRODUCT was defective since he left the covaor belt, your people should have picked up on this when he returned, but I don't know that they can have been busy!

  Now we can discuss these issues and justifications but ontop all...
  This is the most painful.

  Today, I called - TOSHIBA SERVICES customer:
  «Sorry Mr Scott for the problem, you can either wait and we will send someone to fix it, OR I CITY you can take it to the PC WORLD and because TECHGUYS here they will have difficulty for free because it was purchased it there.»

  I have SEVERAL PHONE NUMBERS of PCWORLD UP and bounce calls out there trying to get an answer before someone on the side says # 'maybe you should take in your local store 15 miles away;

  great thought sherlock

  Ok

  I GOTO PC WORLD: yet another human with the ability of a lepidopteran species, 300 million of sp3rm and who threw.

  TOLD me 'We do that because we are are not obliged to fix', ' but I have a piece of paper with a customer reference that a man of trust toshiba services me :(.

  OK hold out my breath of market and go phone TOSHIBA place again once is not a problem...
  This is where it gets good, that I'll call you after talking to another 4 or 5 people on your side.

  When I have the opportunity to talk to someone who is happy to help you, but at a price, who decides to become rolled in an order, the conversation is stupid and throw YOU potential threats and the jargon around #congrates your grease monkey can read a pdf document, although can mine, but luck she has practiced law for the last 10 years and is accurate enough...

  but again, I said Polite so it is here:

  YOUR QUOTE TO REPAIR YOUR PRODUCT: + GBP 100 give or take depends on just how constructive your people decided to be that day...

  So here's my QUOTE

  PHONE CALLS
  TOSHIBA 8: average length 20 minutes 8 GBP
  PC WORLD 4 @ 1.50 min 15 GBP
  GAS / GASOLINE: 15 GBP
  Loss of earnings: 90 GBP @ 5 DAYS 410 GBP
  Damages ' THAT YOU GET MY POINT YET?

  As I mentioned I am a reserved man, but getting fuck by TOSHIBA all angles is has limits

  Now what I would like to see happen on my front door is a spanking brand new laptop with 'ON IS SORRY"note attached.
  but for some reason any I do not get this impression?

  I hope that we can tackle this problem in a meaningful way,
  If we cannot, I have a good idea to post a YOUTUBE video of destroy me your product several sharp objects may be productive of meter, but when it hits 1 million hits I don't know I'll get another company to give me a phone to the goodness of the heart there...

  Now for the forum posters that I'm sorry to rain on your day, to TOSHIBA, please try to understand why I'm a little upset.

  Good day.

  PEACE.

  onlinerender
  PM ME

  Very interesting story. I really hope that someone from Toshiba will read this and contact you soon.
  I also hope the situation is clarified and you will be satisfied with the result.

• Spectrum LG

  Does anyone know if Skype works on the Verizon LG spectrum phone?

  Skype on spectrum works only in landscape mode. In portrait, fashion in other side says I'm always in landscape mode.

• Satellite Pro 4600: How can I get my wireless to turn on?

  EIS,

  Sorry to ask the most basic questions, but I just inherited a Toshiba Satellite Pro 4600, on the back side of the laptop, I have the following information:
  CEL 750 / 128 / 20 GB / 14T

  On the left side of the Panel, there is a wireless - switch this switch, how can I get the built in wireless to work please?

  Thank you.

  Hi mate,

  Firstly: are you sure that you have a wireless card installed? This is the first question and perhaps the most important of them. Not every Satellite 4600 has been bundled with a wireless card and a switch wireless on the left side says nothing.

  I know it s hard without technical knowledge, but what you can do is download the drivers from the Toshiba Drivers and Downloads 'Archive' wireless, turn on the wireless switch and check if some materials are recognized. If Yes, then welcome to the wireless world. :)

  Would like to hear some comments from your part Thx.

• Help, audio stop working in XW6600 with nVidia NVS 315 graphics card

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP spare part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is solved if I reinstall the NVS 290.  For both cards, I use the latest driver from nVidia.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  Hello:

  When you install new video card, it must have a HDMI on it audio chip and what happens, is that the BIOS has disabled the integrated audio system thinking not only have you installed a video card, but you have installed a map audio too.

  Then, go into the BIOS, probably in the Advanced menu, the options menu, you will find onboard audio setting.

  It will be set to Disabled. Set to active, save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  When you restart, the integrated audio system should be back.

• Judgment of the thermal event. Don't restart windows xp

  Dell Optiplex gx270s Small Desktop model, close. On restart, shutdown message was caused by a thermal event.
  I replaced the fan and the heatsink, but I still receive the message.  All the posts on the software side say it is a hardware problem, but I can't windows to restart.  It runs for about 10 seconds then stops.  Cannot reboot in safe mode either, computer crashes, loading... mup.sys loading line by line.

  How to restart?

  Hi Phil_DellGX270,

  Start your computer with a minimal set of basic devices as the mouse and keyboard and check if you can successfully start.

  Try disabling the sound card and video adapter network adapter etc. of Basic Input/Output system (BIOS) and check.

  Consult the manual or contact the manufacturer to do the same.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Kind regards

  Divya R - Microsoft technical support.

• FAILED TO CONNECT TO THE WINDOWS SERVICE (GROUP POLICY CUSTOMER SERVICE)

  Hi I have the same problem is started when I was looking for a driver for a usb camara the problem may be caused by a bad driver who does not belong...

  I am currently running my laptop on safe mode, so I can solve the problem. I use system restore and tried to solve some problems in the registry but still keep getting the pop up C:Windows\system32\Config\systemprofile\Desktop is not accessible
  I do not know completely what is the problem.
  I also have another pop up on the side saying "FAILED to CONNECT TO WINDOWS SERVICE (SERVICE to CUSTOMER GROUP POLICY)...".
  HELP PLZ

  Hi Jesse310,

   

  Welcome to Microsoft Answers Forums.

  • When you get this error message?
  • You are able to boot to the desktop?
  • What is the version of Windows installed on the computer?

  This can happen more often if the user account is corrupted or some missing files.

  First of all, I would say that run you a virus scan online on the computer to scan and remove infections of viruses or malware on the computer and check if it works.

  See the link below for the on-line virus scan and perform a full scan of service on the computer.

  http://OneCare.live.com/site/en-us/default.htm

  If you are unable to boot to the desktop in normal mode, I would say that you start the computer in safe mode with network and try the online scan.

  Steps to start in safe mode with networking

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

   

  Start your computer in safe mode

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If the step above does not resolve the question suggests that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart C7180 on Windows 7 x 64: big problems

  My Photosmart C7180 faithful went to a near-useless state because I attach to my new desktop running Windows 7 x 64.  I am connected via a wired/usb connection cable. Some of these new antics include:

  • Said solution center it is disconnected when it is not
  • The scanner does not work
  • When I try to print a doc, I receive a partial copy of the doc, plus 5 or 6 sheets of paper with a few random characters, printed at the top.

  I've installed, uninstalled, and reinstalled the latest version of the software as downloaded from the website (v 13.1.0) far too many times.  This does nothing.

  I ran the HP print and scan doctor... the print side says that it works very well (it isn't). the analysis option fails on the driver record, saying that "the scanning driver is unable to communicate with the product.  I followed the instructions to unplug the printer, reconnect, restart the computer several times... even once, it does nothing.

  Anyone out there have any suggestions, other than to transport this thing to the recycling center?

  I would try possibly using another method of connection. Maybe it's the USB cord that is defective. If you have another cord try that, or you can try to set up the printer on your network using a wired Ethernet connection.

  Try this and tell me how it turns out that!

• Please help, audio problem with XW6600 and NVS 315

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP 720837-001 replacement part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is resolved, if I reinstall the NVS 290.  For both cards, I use the latest version of the nVidia Driver and driver HP.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  First of all, you want to be sure to load the latest version of the BIOS on this xw6600.  It is from the end of 2012.

  I met this problem several times... do not know if these suggestions will help, but I think that your experience may be related to previous losses audio when the latest drivers are loaded that contain "pilot high-resolution audio" in the game of video driver.

  The current Quadro NVS 315 W7 64 bit graphics drivers Quadro ODE 320.92, which work well in my xw6400, xw6600 and xw8400 workstations running several types of cards Quadro FX and NVS.  If you have used the standard installer downloaded and used the standard "recommended" install that he threw into about 5 pieces, that only one you really need (selected by default single main driver in a custom installation).  That's all I use now, throughout my nVidia installs, and I also check the clean install box on the last page before loading begins in the custom installation path that I go down.   So, to charge fees, I first uninstall anything nVidia via the control panel and then hunt around on drive C for nVidia remains in the trash.  This includes any folder with nVidia in its title, including temporarily enable Show hidden files and folders in the tab views in the Folder Options Control Panel.  I then reboot and finally make this unit "clean install" - checked - technical of custom installation.

  Try this approach first... it's easier.  You might have luck, and audio can return.

  One of the elements that was installed in the "recommended" non-custom installation was a driver of nVidia high-resolution audio.  This seems to conflict with / replace the RealTek driver who was using your audio RealTek chipset on the motherboard.  I discovered that there is a part of BIOS for those workstations which is usually hidden, but sometimes becomes visible with installing drivers high-resolution audio.  F10 in the BIOS, go to the Advanced tab, down for the terminal Options and check if rebalanced Audio appears just above monitor follow-up.  If he was not hidden by the nVidia high-resolution audio driver load then it will virtually always disable status.  Change to activate, F10 to save the change and BIOS don't forget to save changes on exit and F10 again when BIOS asks.

  We got exactly that occur as a result of installing the drivers nVidia GeForce to a GeForce GTX 650 Ti BOOST on a xw8400 and I saw that happen with these latest nVidia Quadro driver packages, too.

  This is the second best method to solve the problem, if it works.

  Another approach is to save your current BIOS settings via replicated in the BIOS Setup, load into my settings to clone xw6600 (attached) and see if the sound comes back like that.  Sometimes integrated Audio remains hidden when we F10 in the BIOS, but my clone settings was set correctly even though the option remains hidden.  You can open the attached CPQSETUP. TXT file with Notepad and Find allows you to do a search for "audio"... the second shot will be the Audio integrated, one.  Note that it is configured to allow this clone... He usually lies in a status of disable, otherwise.

  You can edit it with Notepad, except that, and charge that the version of your original settings of the BIOS using replicated Configuration changed if you want to use this technique with other types of work, such as the xw8600 workstations.  You will always find this entry via this method, even though it is hidden when you look directly into the BIOS, so it's a good thing to know.

  It is the third most easy.

  Fourth... you start dinking autour with drivers in Device Manager.

  Replicated configuration function of the BIOS with a USB, it is very easy to save your original BIOS settings, try another set of settings and return to your original if you wish.  The clone CPQSETUP. TXT file can be edited by hand (with caution) to convert a Disable to activate, for example, saved and then downloaded into your BIOS firmware.  If you want to try attached BIOS xw6600 clone settings make sure to change off the coast of the "xw66002" so that only CPQSETUP. TXT is on your USB... Replicated configuration works which with a file named exactly that.

  I posted here a few days on exactly the configuration of the workstation this clone has been optimized dethrone archive on it.

  Finally, please post back with your findings because it has become a more common problem, and the more data we have here: it is likely, we will find the fastest solution boilerplate.

• WRT600N: How to switch mode to 'Bridge' to 'router '?

  I already posted a messageasking if the WRT600N could be wireless connected w / my new WRT610N. The answer I got was no, I had to wire up together. Well, fair enough - it's been a long shot. The person who answered referenced this set of instructions, I've read before, when I linked the WRT350N w / my previous 600N (cable).

  The problem now is that in these instructions, when he says to go the the "advanced routing" page and change the mode in the drop-down list of 'Gateway' to 'Router', the WRT600N does not have a drop down box - all there is "NAT", radio buttons marked "enable" or "disable." (I tried to insert a picture of the page, but cannot find a way to do that here.) Even the little "help...". "link out side says that there should be a drop-down list box, but there is not.

  I guess I should I put 'NAT' to people with disabilities, that would achieve the same thng than to change the 'Gateway' to 'Router' mode, but I wanted to check here first and see what the official word. So should I set 'NAT' to disable to move my 600N mode to the "router"?

  Thank you! This is good info to have. And looking at the "Advanced Routing" instructions, I notice now that they have dynamic RIP (Routing) active, but the "yellow flag" instructions don't say nothing about it, so I didn't change the disabled. The dangers to do these things later in nite!

• Popup in the email to yahoo asking to add to my contacts

  Whenever I connect to Yahoo Email I hear a pop sound and a box will appear on the right side, saying that he is of Wendy Niebuhr asking me to add "him or her" to my messenger online contacts list. He asked me to accept or decline. How can I get rid of him? I ran Microsoft Security Essentials, which did not find anything wrong. I also went into my email and unchecked options "enable updates". It's still there. And it is malware? I have a trainer that works well on other windows pop up.

  Application of Yahoo Mail support staff why it does this.  It's their site, not Windows that ask you this.

  'giallo v' wrote in the new message: * e-mail address is removed from the privacy... *

  Whenever I connect to Yahoo Email I hear a pop sound and a box will appear on the right side, saying that he is of Wendy Niebuhr asking me to add "him or her" to my messenger online contacts list. He asked me to accept or decline. How can I get rid of him? I ran Microsoft Security Essentials, which did not find anything wrong. I also went into my email and unchecked options "enable updates". It's still there. And it is malware? I have a trainer that works well on other windows pop up.