Similar Questions

• I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  Hi Meenakshi,

  Thanks for getting back to me. The problem is solved now. We had to reinstall Acrobat DC who, for some reason, had disappeared.

  Regards, Randy

• Computer does not recognize router befsr41 after that I tried to reset it.

  So earlier today, I tried to reset my router because for some reason that I could not log in with my password I use normally, after switching to AT & T of the Charter (from DSL cable)

  Just after that, we moved the router does not either, but we called linksys for repair, but we had to pay $30 and I'd rather not do it again.

  Anyway, my computer will not completely recognize my router. I can't access it is based on the web options page, if I try to use the CD it will say that my computer is not connected. I know the cables are connected correctly.

  Oh and also, why I couldn't use my old password?

  Someone at - it an idea on what could be wrong?

  As you have activated your ISP to a cable on the DSL. The first thing you need to do is, pick up your Modem to the router. Let your Modem is connected to your computer. Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Once you connect to the Setup page of your router, on the Configuration tab, you need to change the local IP address to 192.168.2.1 and click on save settings.

  Once the settings are successful, unplug the power from your router and Modem. Connect the Ethernet cable from your Modem to the Internet Port Linksys router. Connect the power to your Modem first, wait until all lights are cover, connect the power supply to the Linksys router. Once all the lights are solid check if you are able to browse the Internet on your computer.

• Can not buy anything more after that I updated iTunes to 12.5

  After the update to iTunes 12.5 asked me to accept the new terms and condition, after that, I get a warning that I should set the date and time and accept cookies from iTunes store... I checked and all is well... but I still cannot buy songs, movies, tv shows...

  Found, I accepted the terms and conditions before clicking on buy something (I clicked on send iTunes gift and is then invited to accept the terms and conditions)

  After that, I could buy movies, songs, etc...

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• Half a second activity in Firefox 50 after that opening a new window/tab that could be due to malicious software?

  Hello world

  After you open a new window or tab, Firefox 50 engages often in half a second to load the empty page before it allows me to enter an address. Could this be the suspicious activity of malware?

  To show you, I recorded a video of him:

  https://www.dropbox.com/s/drvmzrqqqjnopvo/Firefox%20page%20Loading.mov?DL=0

  It also happens if NoScript, my single extension, is disabled.

  Thank you!

  I think that the problem is now cleared up. Firefox seems just in contact with their own server of telemetry. The HTTP log that shows the server

  incoming. Telemetry.Mozilla.org

  is contacted.

• How can I NOT save a file whenever I open a PDF file, open an attachment, etc. ? I know how to set the option to change the save location, but sometimes I just want to not SAVE a file I've read during navigation

  I don't want Firefox to save a copy on my hard drive of each attachment, PDF, etc. I have open while browsing. How to make this happen?

  Firefox needs to download and save a file before transmitting it to a plugin.

  You can set the Boolean pref browser.helperApps.deleteTempFileOnExit true on the topic: config page to remove these files.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• TimeoutException - during the web service method call that opens a PDF file

  I am updating a legacy program that uses Adobe Acrobat Professional 7.0.  The idea is that the customer is calling web service methods, which manage open a PDF file, reading or writing in the PDF file, if necessary and closing.  He then returned data (if reading) to the client.

  The only problem with what I'm having is that the client will take a break for about 60 seconds and raise a TimeoutException.

  I know that the method on the end of web services works, because I wrote a quick driver who calls the same method, but it is running normally and works perfectly.

  My question is, basically, what would cause the client to be block/gel during the call to the web service method to perform this operation? Everything works on my workstation, and I've debugged to see that filename passed is the same in both tests.

  Thank you!

  This would be better addressed in the forum of the Acrobat SDK kit.

• Firefox 4 does not save tabs even after that I have the settings to display the message "save and exit".

  As the title suggests. Basically after I changed the settings using the "topic: config" method and ONLY the parameters of the topic support told me to change Firefox 4 still does not actually save the legs after leaving. After the reset just FF4 restarts me to my home page. Now, I try only to save anywhere between 2 and 5 to the more tabs.

  Firefox 4 saves the previous session automatically, so it is no longer necessary for the dialog box asking if you want to save the current session.

  You can use "Firefox > history > restore previous Session" for the previous session.

  There is also a button 'Restore previous Session' on the default on: Home home page.
  Another possibility is to use:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

  If this does not work check that you do not run Firefox in permanent mode of private - browsing using Firefox without saving history .

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• L26500 will not be put on after that media jam

  Hello, this problem had beed going on for months... and through 2 firmware updates. After turning off to clear a jam of media, the printer will not feed when you press the power button. However it randomly starts anywhere from 30 to 60 minutes later on its own... It's BAD for my business but also extremely frustrating. Does anyone else know this and if so you have found a solution?

  Thank you

  Serendipity has solved my problem because of stupidity...

  Every time I had a media jam I would pull the plug because I didn't wait for the printer to cool down before going off to remedy the situation. The outputs are located right next to the printer for easy access was the best way for me to power down. Now, I find that this sudden loss of power is what caused the delays with my printer restart. I guess that something in the circuit is not as it's abrupt loss of power and when I plug it back, he must go through some diagnostics to make sure that it's okay to start up, although there is no LED activity or heard sound... Yesterday, I had a media jam, but it was before the heated printer so I hit the power button and the machine will stop after a few seconds. Once the problem is corrected, I pressed the power button and voila, he began. I have since stopped and restarted a dozen times with the power button to verify a second time and also pulled the cord several times...

  Bottom line is don't PULL THE PLUG to POWER DOWN!

  After a media jam in a printer heated, I now press the power button and help cool radiators more quickly by stirring up the front of the printer. He definitelt speeds things upwards, and the printer starts right with the power button when I'm done fixing the jam.

  Yay.

• laptop not having not the portable printer after that computer settings has been turned off

  I have a problem with my laptop and my printer after I connect to the WIFI printer. It will work if it was attached to the printer, but as soon as I turn it off the setting have disappeared. My laptop works on WP7 and canon mg5200 printer. can someone help me.

  Hi Phil,

  Have you installed new software or hardware before the show?

  It seems that printer drivers could be exceeded and must be repaired or updated. We will analyze and identify the cause of the problem.

  You can run the printer Troubleshooter and update the drivers of the material provided.

  Solve printer problems

  I could not locate the exact model number you have provided. If we're not the printer model number, you can choose one that fits in the list. If the printer model number is the same and that you did not find the driver, then we will have to install the driver of a similar model.

  You can see this article from Canon.

  If the problem persists, you may need to contact Canon support for more information.

  Hope this information helps. Response with status so that we can help you.

• LR6 freezes after that performance option checked

  I've recently upgraded to LR6 and now have problems with developing mode.  I checked the box for the performance of the video card, and my card appears.  It is nVidia 745M with 2 GB of RAM. My laptop has a 2.4 Ghz Intel i7 dual core processor. When I'm in library mode things work very well, and the video is much faster.  But when I click a PIC and try to go to develop the area of the image will grey and freezes.  The only way out is to cancel the LR and not getting any changes made.  If I reboot and uncheck this box in the performance parameters, I can work OK.  Is there any solution for this?

  In fact if your vid card can be used correctly this box options gets verified by LR automatically, at least that's how on my systems. Laptop Desk had checked the box use GPU, don't.

  So put you a check mark in this box to Option you did that LR is not. Uncheck the box and see what happens.

• USB plays is not in the car after that put 9.3.4 at level

  I have an IPhone 6 and own a 2010 ford fiesta.

  After upgrading to IOS 9,34 I can't read podcasts or music through the car radio with USB cable, radio do not even recognize the phone is plugged in, although it will charge the phone and play via Bluetooth. and all the phone features work very well.

  It worked fine before the upgrade and the desire to return to the use of usb cable because it it allows to use the steering wheel radio controls.

  Ford blame Apple an Apple accuses ford. I had updated the firmware made by ford dealers.

  seems whenever apple do a update it fucks things up

  Sometimes an iOS update breaks compatibility and you will have to wait for an iOS update or a firmware update for the system of ether.

  However, try the following:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the car.

  -Go to the support site for Ford and see if they know anything or if a firmware update is available for your car

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• Inbox shows 1 unread message after that opening all the messages.why is not highlighted new inbox messages

  I can't find the message unread despite having opened all my messages in the Inbox and wonder why new messages no longer bolded.

  Right click on the folder, select Properties, and then on the button repair. A new clue can delete it.

  If not try
  View menu > folders > see not read if Thunderbird can find because he says he's here after an index rebuild.