Similar Questions

• ThinApped Lotus Notes 9.0 freezes after that opening attached PDF

  Hello world!

  I'm new in ThinApp environment, I hope someone can help me with a headache ThinApping Lotus Notes 9.0, here is my scenario:

  ThinApping App: Lotus Notes 9.0

  Capture Machine: Windows 7 x 64 on VMware Workstation 10.0.2

  Test computer: Windows 7 x 64 on VMware Workstation 10.0.2

  After the construction project and to test the application of thinapped it works fine until that opening any PDF file attached that brings the freezing point of Lotus Notes 9.0 and adobe reader (XI) two apps answer before killing adobe reader process "AcroRd32.exe".

  I tried to capture app in WriteCopy and mode of fusion, capture whitin outside domain machine, machine of capture with the local administrator account, capture and machine with the domain administrator account, but in all cases the result is the same, does anyone know what I am doing wrong?

  Thanks in advance!

  I thought that Lotus would have extracted the pdf attachment in the file folder before opening it, but it doesn't seem to be the case. Lines above are running in native mode, not Adobe Reader process virtually so its process is not able to access the content in the virtual bubble (this is why you have this error message with Adobe Reader).

  Try the following:

  -Remove the tray sand

  -Remove these lines from the package.ini:

  ChildProcessEnvironmentExceptions = AcroRd32.exe

  ChildProcessEnvironmentDefault = virtual

  - Recompile the application (file build.bat)

  -Open Adobe Reader

  - Go in Edition > Preferences > Security (enhanced)

  -Uncheck "Activate the Mode protected at startup"

  -Click OK

  -Close Adobe Reader

  -Try to open a PDF with Lotus notes attachment again!

  Olivier

• in Acrobat DC - I would like to change the font of a strikethrough text field after that I have check the box next to it.

  I work on a document in Acrobat DC and want to be able to use checkboxes as a checklist. Once the box is checked, I want the police in the text box the box is associated with having a police barred .

  Is this something that needs javascript?

  Textfield name is 4MedHistoryMedication1 , and there already Calibri font type.

  The box is named 4MedHistoryMed_1_RXonFile

  When the 4MedHistoryMed_1_RXonFile checkbox is checked, then the text in 4MedHistoryMedication1 will be Calibri ; So any content text already typed into this text field will get the police barred.

  Don't forget that I'm not familiar with Javascript.

  It will take JavaScript and the text field must be put in place to allow rich text formatting. You will need to set the value by using span in order to set the bar. Here is a sample script for the script of mouse upward to a check box that should help you get started:

  Script mouse upwards to the box

  (function () {}

  Set a Boolean value that indicates whether to set the property for each span made out

  which depends on the State of this check box

  var bStrikethrough = event.target.value! == 'Off '.

  Get a reference to the text field

  var f = getField ("4MedHistoryMedication1");

  Get the value of the text spans tabular field that represents the rich text value

  var aRV_spans = f.richValue;

  Set the property for each span made out

  for (var i = 0; i)< arv_spans.length;="" i="" +="1)">

  aRV_spans [i] .strikethrough = bStrikethrough;

  }

  Update the value of the text field

  f.richValue = aRV_spans;

  })();

  More info is Acrobat JavaScript reference.

• Internet opens but freezes after that mymsn page will appear. have to wait a long time each time I open a new page on the internet?

  Internet takes forever to open each page.  It goes around and around, and sometimes never opens a site.  can I have a virus?  What can I do?

  Maybe corrupted add on.

  Click Start, type: Internet Options
  Press enter
  Select the "Advanced" tab
  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

• Firefox 16.0.1, videos youtube freeze after 2 seconds. FF injuries.

  Videos YouTube freeze after that 2 seconds... audio game continues for 5 seconds on it. The whole browser stops responding and I have to ctrl + alt + delete at the process level to close FF16.

  After that I uninstalled my customized version, so BONE STOCK FF16 is miss you, this is a new installation. I tried the current version flash 11.4 and 11.2 flash version to get my problem is solved.

  NO ID CRASH. No formal don't crash in itself, just a browser totally unresponsive.

  By the way... Chrome works youtube without incident. WTF.

  In addition, this problem does not exist on my installation of Waterfox... a variant of 64 free bits of 15 FF. Maybe I have a sort of x 64 issue. I think that maybe that's the problem with the standard 32-bit version of FF16. Ask me again why this happened in the first place.

  I run McAfee OAS Business Class A / V, never had a virus or something in 4 years.

  SOLVED. Watefox is the only way it seems. Needs of Firefox to fix this flash on its own it seems.

• LR4 does not auto launch import dialog box after that one card is imported.

  Hi all

  I upgraded to of LR3 LR4.  Works on a new iMac with mountain lion.  LR4 said its updated.

  If I import images of several cards that LR4 will automatically detect the first map and bring up the dialog box import, import the images and then ejected the card.  When I pop in the next map there is no automatic import dialog box and I have to go to the drop-down list so he could start.  When the second card is important it doesn't auto eject and I have to do it manually.  Automatic detection is checked.  Eject after that importation is checked.  And the LR4 app is open (not trying to start LR when I put a card).

  I did some research with no luck so if there is a thread about this please send me the link.

  Thank you all!

  For testing purposes a couple of things to try:

  1. try to create a new, empty catalog. It works as expected in the new catalogue empty?

  2. If not. Close Lightroom, rename the preferences file, open Lightroom and it will rebuild the preferences file. What is fix?

  Preferences file: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html

  If she doesn't fix it, you can rename your preference back to your workspace to restore files.

• After that Firefox v17 update freezes

  After that an update to version 17.0.1, whenever a web page is selected it 'freezes' on this page, only way out of Firefox is to go at the stop programme and management task.

  For the record, your 'more system details' shows Windows NT 6.2; WOW64 is Windows 8 (64-bit). Windows 8 is listed as compatible with Firefox 17.0.1 according to http://www.mozilla.org/firefox/17.0.1/system-requirements/

  You can consult this article for a solution:

  • Firefox crashes or does not - how to fix

  Alternatively, you can go through these basic troubleshooting steps:
  Troubleshoot and diagnose problems in Firefox

• Why Firefox is not saving my log in info after that I used the option "Remember Me"?

  Why Firefox is not saving my log in info after that I used the option "Remember Me"?
  Whenever I get on a frequently used site where I have already indicated on the Firefox browser to save my log in info, I still need to manually connect. The latest versions of Firefox are not like that. I am running Firefox on both my Imac (OS 10.5.8) and on my Mac Book Pro (Snow Leopard), and on each machine, the latest version of Firefox does the same thing. I don't have this problem with Safari, but I prefer to use Firefox then please let me know if there is anything I can do to solve this problem.

  This has happened

  Each time Firefox opened

  Is two months ago

  If you register your name, and your password in the password manager and then having no other effect that Firefox can fill these name if necessary.
  Firefox is not automatically a session you.
  Many Web sites may use a cookie to remember you, you do not need to open a session.

  Websites to remember you and automatically log you are stored in a cookie that you must allow: Firefox > Preferences > privacy > Cookies: "Exceptions."
  Also make sure that you do not use the delete, search and download Firefox browsing history to erase "Cookies" and the "Site preferences" "browser history".

• I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  Windows 7 Home Edition, the stock machine, even if it does even if I start in diagnostics (F9 at the start of the BIOS), so I doubt it has nothing to do with the operating system.

  By "hard block", I mean the screen goes black, the wireless keyboard is not flashing blue light on the USB FOB and the power button only turns off although it by hand for 30 seconds. I have to pull the power cord to turn it off.

  It started shortly after the application of the 5.12 version 2A8E update motherboard BIOS published 2011-03-24. Never should have done that; experience shows that I have more problems than improving when updatng BIOS' are.

  No heat problem (air vents are clean as a whistle). I suppose the best thing would be to restore the BIOS but I don't know if it is possible, or how to do it.

  This is my daily workstation and is now effectively a boat anchor / deadline / brick.

  Any ideas?

  Yay for me. My dose of GENIUS has had this problem for THREE DAYS running machine now without any problem whatsoever.

  It it CERTAINLY evil genius of this machine, no doubt.

  Other victims of the Touchsmart series should regroup and get some kind of compensation. I know that I had to buy a new computer to replace this one when it stopped working, and I spent a TON of time to solve the problem (it would be an easy solution to the factory; not so easy at home)

• In disk management, I checked the drive to shrink the process after that he had finished he told me that there is space for shrinkage of 9 GB!

  Hi all

  I only have one disc space (C) with 1 TB space, the free volume of that disk is about 330 GB, I want to reduce it to create the new volume. In disk management, I checked the drive to shrink the process after that he had finished he told me that there is space for shrinkage of 9 GB!
  Can someone help!

  Original title: Shrink Volume

  The common cause for limited space retractable is the Table of master files (MFT). It is essentially a system file good behaviour that even Windows own Defrag tool will not move.

  PerfectDisk will clean this file and there is a free trial available.

• After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  [Fixed spelling - Mod]

  Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.

• Options grayed out after that migration vSwitch0 vmk0 to distributed network switch

  I have a bunch of ESXi 6 guests, where I would like the default vSwitch0 to a vDS management interface. However, it seems that the management network gets screwed more or less of this operation

  First I tried to simply migrate the physical interface and vmkernel to vds = no chance (resets the form configuration time to hosts)

  Then I tried to connect a NIC seconday to the same switch, adding as a management console interface, make two interfaces marked as management interfaces. The uplink of vSwitch0 is replaced by the new interface and the vds is mapped to the original management interface. From this point, I can migrate vmk0 to the distributed switch and remove the extra card. All good, at least at first glance. The army continues to communicate with vCenter and so on. However, return to the console options to "Network adapters" and "VLANS (optional)" are grayed out. The only way I managed to get back them is again a reset to the default settings of the management network.

  After som test front and rear, it seems that these options disappear as soon as vm0 leaves vSwitch0?

  Any ideas how to solve this problem?

  The army continues to communicate with vCenter and so on. However, back to the console options for "Network adapters" and "VLANS (optional)" are grayed out. The only way I managed to get back them is again a reset to the default settings of the management network.

  I guess that's the expected behavior, because once your vmk0 has been migrated to vDS, now the vDS control plan which is with vCenter server will allow you to change these settings as network card and VLAN ID etc.

• Can you display text after that you checked a box or not?

  Can you display text after that you checked a box or not?

  Ex:

  • Yes (please contact Bob x 3-1234) only want it to appear when you check the box)
  • NO.

  Sure. If you use a field (text field, button) to display the text, the script of the mouse to the top of the Yes box could be:

  getField("button1").display = event.target.value = "Yes"? Display.visible: display.hidden;

  Change "button1" to the actual name of the field and 'Yes' is the value of exports of the Yes box. You can use what you want, and you'll probably want to make the button read only as well.

• predefined text will not apply - it asks me to return, but after that the text is not performed?

  Hi, im a horrible time with text presets.

  I am trying to add a blur text evaporate pre-set to my text layers.

  I dragged and dropped the preset on the text layer, and it seemed that it was necessary to make it as if a change was applied-it. but after that rendered nothing happens to the test, no changes have actually been applied. no error message appears and I can't find an answer to this anywhere.

  any help would be greatly appreciated!

  Ive attached a screenshot of what it looks like. in the screenshot I've dragged him evaporate preset above the layer, that is why this article is not green up, but even after that I return however, the text has no effect as if nothing has been applied.

  

  Edit: ive found if I double click the preset, it sends the white words and I can't make it visible? I'm so confused.

  You might have added the preset to an incorrect point on the text layer?

  The preset adds keyframes for the text in the current-time indicator layer, animating the range selector in a band called "evaporate facilitator" to compensate for the value of the scale/opacity/blur

  Move keyframes to the start & end time desired can give you what you are looking for.

  I don't think that there is no color change in this preset.

• Vista Home Premium 32 bit freezes after an indeterminate amount of inactivity

  For the last few weeks, my HP Pavilion dv6500 laptop has been freezing after periods of inactivity. Seems that the only change made to the computer until that moment was a Windows update that was late about 3 - 4 weeks. No other programs have been installed.

  I have not precisely timed duration yet, but I think 10-15 minutes of inactivity in freezing results. Little happens is important if the lid is open or closed. Only "a freeze" is to do a hard restart.

  I ran in Mode safe... same results. I did a system restore to a point before the update of Windows. I reinstalled the latest graphics and audio drivers. I ran SpyBot: Search and Destroy... we found an approximately 18 items requiring repair or removal, but it also has not fixed the problem. I ran Check Disk and the problem still persists.

  I'm running out of ideas, and this problem is driving me absolutely crazy. I hope someone can help before I lose my mind. Thanks in advance.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  ==========================================

  Spybot is a fine program, however, it has two modes of residents who can cause problems with IE 8, Vista/Win7
  and other programs. In the settings of Spybot, I stopped TeaTimer - SpyBot - settings. And then start - type
  in the search box-> find Services at the top of list - just right-click on it - RUN AS ADMIN - look for SBSD security
  Change-double click on it - STOP Service Center, then MANUAL. Now you can run SpyBot as one
  scan on demand whenever you want. You will need to restart to stop TeaTimer to load again if it has been
  the before value.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.