Think you install windows 10 but to know about compatibility with PhotoShop CS6? Is it?

Similar Questions

• Hard disk formatted, freshly installed Windows 8, but it does not work with the old key

  I had bought a Lenovo Z570 two years back, with Original Windows 7 Home Premium.

  When Windows 8 released in November 2012, I had bought and upgraded online for her.

  I had used the Windows 8 since then. Yesterday, due to various problems, I had to format my hard drive, and when I finally managed to install Windows 8 on my laptop again, it does not allow me to activate windows 8 using my normal key (he says that this key did not work)

  It was the key in the email from the seller, and I have an e-mail, which has a Bill to prove.
  I guess this could be due to the PC 1 by purchase clause, however, it's the same PC (more like laptop). So I do not understand why I would not be allowed to activate the software I used earlier on the same laptop still on the same laptop after installing it.

  Please get to me as soon as possible if there is a solution.

  Thanks in advance.

  Hey! Thanks for your help, but I had refreshed my windows 8 in the meantime and connected to the internet after that. and then when I followed your instructions and run slui.exe, it says that windows is activated. so I guess that the problem is solved.

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Installed windows vista, but you want to réécrirait xp

  I installed windows vista, but want xp back.  I prefer to work with the old operational system, as I am getting better.  I tried the system restore, but it says there is nothing there.  I don't have the disc xp because dell never gave me one, they said to use restore.

  I installed windows vista, but want xp back.  I prefer to work with the old operational system, as I am getting better.  I tried the system restore, but it says there is nothing there.  I don't have the disc xp because dell never gave me one, they said to use restore.

  As well as the correct notice of Rick:

  Call Dell and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  See you soon.

  Mick Murphy - Microsoft partner

• When you install Windows Vista on a laptop I get this error code 0 x 80070057

  I tried to fix & mobile friends for a while now & I have noticed that, during the installation of Windows Vista, it fails with a few different answers. The error code that showed, the majority being 0 x 80070057.

  The laptop is a MSI VR602 with a broken DVD player (I was the installation via USB) & other potential problems.

  A past remarkable repair I knew everything was the screen being smashed.

  However, when I saw if I could install it on my custom built computer installation flows well (I used the laptop HARD drive)

  I then tried using the disk HARD in the portable windows would begin not with success.

  I think that the cause could be the big difference in the environment.

  I formatted the HARD drive many times & installed via USB laptops with the same result.

  I also noticed another post that it is possible that the SATA connections could be blamed.

  Also at the start I noticed he said something like 'S.M.A.R.T. capable but failed the control unit'. When you check this on my computer, when starting my CHIP on my HARD drive just off computer & laptops.

  The HARD drive is a Western Digital WD2500BEVT.

  Windows Vista Home Basic final first version so that I could use the original serial code.

  I can't try it with an another HARD drive that I have not access to all.

  It would work if the installer has used the same exact files two mega & but there is no chance of this change.

  If someone happens to have a copy of the MSI files used on this computer is would be muched aprciated. (Sorry for the bad spelling)

  It is a 32-bit system.

  Another point is that when I tried to install Windows XP it installed for most, but crashed & had the problem with hal.dll file missing.

  Please post a reply if you know one. If you need information additional just ask.

  Don't worry, I managed to solve the problem. It's a corrupt installer. I have the laptop runs like new.

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of drive Media Express before you install Windows XP - Pro?

  Hi all

  I want to install Windows XP Professional on my Satellite A100-153.
  I have already done all the backups, created a tool and driver CD and I'm ready to start... BUT:
  What the Express Media Player? I have a recovery for the Express Media Player CD. What do I need to run the Express Media Player Recovery before you install Windows XP Pro?
  I'm not reinstall my Windows XP HOME Edition. As I am used to work with the XP pro edition I have a Windows XP pro. So no recovery.

  Can someone help me?
  Thank you very much!

  Hello

  Installation of the drive, I found a FAQ document very useful on the Express media:
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated.
  To get this free space of HDD the 3 products part must be used namely Partitions magic 8

  good luck buddy

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• I would like to re - install Windows Vista, but my drive does not all service packs. Download Windows Vista with service pack already on it?

  so, I'm running vista 64 bit basic, I want to do a fresh install,

  but my drive is very early (noservice packs ect) can I download of ms a basic family of complete up-to-date vista 64-bit with sp2 with my cd key? or should I shut up and make from my cd and cope? If I do a reinstall should I reinstall all my programs as well?

  Hello yaleblor,

  You can download the full SP2 for Vista from here: http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Save the file to a CD/DVD or USB key.

  Once you have the service pack downloaded file, you can use your current Vista CD to install a fresh copy of Windows Vista on your C: drive. Once you have installed Vista you can install service pack 2 directly from the CD/DVD or USB you originally stored it on. All you then need to do is to run the Windows updates to update your system completely.

  You can find out how to do a clean install by looking at this link from my Web site: http://vistasupport.mvps.org/install_windows_vista.htm

  After you install Windows Vista, you will need to re - install all your programs, so make sure that you have all the programs by hand before starting to consider reinstalling Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• I did a reimage on my desk and the re-installed windows vista, but he didn't like my product code...

  I did a reimage on my desk and the re-installed windows vista, but he didn't like my product code (I got this from my sealed re instilation disk operating system) and it is not a computer online, how can I activate it with the code that I have? (FYI I won't post the verification code here or anywhere else)

  You can activate by phone. For more information, see: http://support.microsoft.com/kb/940315 and http://windows.microsoft.com/en-US/windows-vista/Activating-Windows-frequently-asked-questions

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

  I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

  Generally, it should work, but of course there may be problems of occasional compatibility through different programs and their different versions.

  Mylenium

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• When you install windows 95, which is the executable that launches the installation process, and where it is located?

  When you install windows 95, which is the executable that launches the installation process, and where it is located?

  The file is setup.exe.  Depending on your version of Windows 95 CD, it could be in the WIN95 folder or in a subfolder of WIN95.

  If you have more Windows 95 questions, great places to get responses are microsoft.public.win95.setup and microsoft.public.win95.general.discussion newsgroups.  It is a Windows XP forum.