This allows regeneration without using it

Similar Questions

• Re: How to get Corel WinDVD without using the recovery disk?

  The update for Corel WinDVD was rather messy and because of this some owners laptop uninstalled to try to install the new software. Now, we ended up with the only possibility of an image recovery, which, in practice, means losing the software.

  Updates for the Bluetooth and wifi are also pretty messy.
  Is isn´t possible to get this software back without using the recovery disk?

  As you probably know recovery image installed on Toshiba laptops is a kind of software that includes the operating system, drivers, tools specific to Toshiba and utilities but also some additional software like antivirus or DVD player application.

  All drivers and Toshiba tools and utilities are available on the Toshiba download page, and if you want to install the version of the OS, you can download each of them.
  This additional software is not available for download. It's a kind of gift on the owner of the laptop because as the new owner, your machine must be ready to employment with full protection and opportunities to use multimedia content.

  If you don't like it, you can remove the system and use your own applications.

  Summary: this software cannot be downloaded separately and if you want to have it again, you must install original image of recovery designed for your machine.

  If you have any other questions do not hesitate to ask.

• Can you have SMU 1062 q turn on without using the power button

  I use a q SMU-1062 for a test project that will take place inside a protective case.  The power button on the chassis will be covered by a plate on the protective case that make it boring and difficult to switch on using the power button on the chassis.  The chassis will be plugged into a power strip of travel - lite which is mounted in the case.  Is it possible that I can have the power to frame on when I turn on the power strip?

  I found another route.  In the controller BIOS, I changed the parameters of loss of AC power to TURN on after that AC is returned.  This allows me to use the power strip in my configuration to control the electric network distributed to the controller.  The following steps will describe how I got this.

  1. Power of the SMU-8115 controller.
  
  
  2. A message will appear on your screen, press to enter SETUP
  
  
  3. Select 'Remove' (quickly, because you don't have a lot of time before the window disappears and the controller continues to load normally.)
  
  
  4. This will open the main Menu of the BIOS
  
  
  5. Select the Advanced tab (use the arrow keys to highlight the selections and the different tabs, select a setting change with 'enter'
  
  
  6. Select > Configuration power and rest
  
  
  7. Change the configuration to power on when power is restored.

  The controller can be normally close by using the start menu, and "shut down".

  Start button / stop of the chassis is still capable of turning the power on to the controller, but now when I shut off the AC power strip and then return power, get the controller chassis.

• How to write the SQL without using dynamic SQL?

  How can you write this under SQL without using execute immediately?

  You can use static SQL (using something like a CASE statement)?

  test procedure (one in varchar2, b number, each number) is

  v_num_recs pls_integer;

  Start

  Select count (*)

  in v_num

  FROM table1

  where

  col1 = one and

  If b is not null then col2 = b

  If c is not null then col3 = c;

  / * i.e. If b is not null, where condition to add this line only. If c is not null, where condition should add only this line. OR condition No. it * /.

  dbms_output.put_line (v_num);

  end;

  Or should I use dynamic SQL statements for this?

  I was wondering if the two are NOT NULL? Well check this.

  Select count (*) in v_num

  table

  where col1 = one

  and col2 = (CASE WHEN (b is not null) THEN b ELSE END col2)

  and col3 = (CASE WHEN (c is not null) THEN ELSE END col3 c)

• My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  problem iPhone 5s load is reduced to

  My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  Please help me anyone

• Access blackBerry Smartphones to backup data without using a phone smart blackberry. How does this work?

  I had a Blackberry 9700 and I made a back-up via Blackberry Protect App. My Blackberry is stolen and I want to transfer all data (approx. 600 phone numbers) from the back-up to my PC or to my Samsung Galaxy SII that I can borrow temporarily from a friend. Bottom-line: I need access to my back-up data without using a Blackberry device. How does this work?
  

  Hey Sourbag,

  Welcome to the community of BlackBerry Support Forums.

  You will need a BlackBerry to access these backup information. There is no way around it in BlackBerry Desktop Software.

• I'm looking to download only the installers of Dreamweaver and Fireworks CS6 without using creative cloud. Is this possible?

  I'm looking to download only the installers of Dreamweaver and Fireworks CS6 without using creative cloud. Is this possible?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to disable the other computer without using this computer?

  I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to deactivate the license on the old computer without using it?

  you are allowed two facilities, activations, you should may not disable before activating on your new computer.

  But if you don't, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html.  Ask a county of activation reset.

• Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please

  Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please

  http://www.Adobe.com/downloads/other-downloads.html can help

• I renewed my student Adobe CC version, but the creative cloud app will only allow me to use the 30 day trial, how to solve this?

  I am connected to the account on which I have the student version, but still it allows me to use the student version.

  That's what I see when I'm logged into my account in the browser: http://i.imgur.com/MCQjNwB.png?1

  That's what I see when I'm logged into my account cloud creative app: http://i.imgur.com/GyQif7n.png

  As you can see I can only choose trial. I paid for a full year, however, and I also was charged on my credit card already. I really need to be able to use photoshop today.

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Download PS CC without using Creative Cloud Desktop?

  Download PS CC without using Creative Cloud Desktop?

  Because my CC is stuck on the loading wheel, why keep going in circles, I tried all of the solutions I found on the internet but nothing changes!

  Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  If you follow the 7 steps you can directly download a free trial here: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Change all paths in a layer without using a layer appearance attribute

  I suspect I did it wrong for a while, but I don't know how to do it right.

  If I want to change the appearance of all paths in a layer (say, something simple to change their line color), it is pretty easy to target in the layer by clicking on the button of the target layer. However, when I do change (as outline in orange color setting), it appears in the appearance of the layer itself - each element within the layer are not orange line directly in their appearance attributes, they just inherit the appearance of the layer attributes.

  I understand that this is the intended behavior, but I found that it's easier for me to avoid the layer effects and have just each element in a layer to be autonomous and show all its own attributes of appearance without something inheriting from the upper layer (I tend to forget and be confused about when they appear). However, I don't know how to force the appearance of a layer down to its subcomponents (likely the compensation of the appearance of the layer to avoid duplication). Is it some commands I'm missing?

  Now how I do it, it's all in the layer by using the layer target, then UN-target target the highest member of the layer. This allows me to change the appearance of all items in the layer (except the one at the top) without changing the appearance of the layer itself. Then I do the top separately. Seems kludgier than she should be. Any help? Thank you.

  tqrtuomo, I was confused by the present, sometimes as well and made the same thing you describe. I think the key, when selecting on a given layer or group is to click on the 'right' of the 'Target' button in the layers panel to the layer/group level. Make sure that there is no 'circle' around the target button or appearance will be assigned to the layer/group.

• Reports of the Scores without using the built-in Quiz

  Is it possible to set up a 'quiz' in captivate, without using the integrated questionnaire slides?

  Quiz slides are very restrictive and clumsy and I'd rather build them myself.

  So, say if I had a slide that was a question on it and two buttons to answer 'true' and 'false '. Is it possible to use these buttons to execute advanced action, which assigned a score that could then be reported to LMS?

  Sorry if this is a silly question.

  Best

  M

  Maybe you've never found my blog? Have several articles on custom questions and reports of these issues.

  Custom report issues - part 1 - blog of Captivate

  Custom report issues - part 2 - Captivate blog

  You can find more, using tags. There are some limitations of custom questions: no question pool, partial scores and penalties are difficult/impossible if you use not JS.  & Sliding is a type of hybrid issue that allows for customization as well. Here are the latest articles on custom questions:

  Custom short answer Question - Captivate blog

  Hotspot issues in Captivate 8 - Captivate blog

• Turn on closed captioning power without using the playback controls?

  Hi there - I'm going to set up a movie I want to see the to use the playback controls.

  Is there that a the end user can enable/disable subtitles without using the CC button that normally appear in the playback controls (because it won't be there)?

  Thank you

  You can create a button or click box that toggles the CC variable and him allow this way.

• Is it possible to "Allow participants to use Microphones" by default?

  I would like to allow all meetings start with the option 'allow participants to use Microphones' turned on.  This is to allow users to connect their microphones by VoIP without having to go into the options and allowing every moment a meeting begins.  In Connect 8 it was an option that appears automatically when the audio conference was begun but 9.1 connect it does not appear automatically.

  
  I'm running 9.1 connect with audio integrated MeetingOne.

  Not sure where the setting was in Connect (other than promote Participants to presenters) 8. With 9 Connect, you now have the Audio conference Preferences dialog box (meeting > Preferences > Audio Conference). With my M1 bridge attached to the room (full integration), I'm not able to do the two VoIP and phone at the same time. I don't think I've ever been able to do this. Here's what I see (radio buttons to VoIP or phone):

  

  However with a universal profile voice (UV), I am able to predefine that participants obtain rights of mic. Here is what I see with the UV bridge associated with the room (checkboxes for VoIP and phone):

  

  With the UV bridge (or VoIP right I guess), I can predefine all participants access the microphone when I activate the audio bridge (or if I set it to start automatically, when I activate the room as the host).