This attribute is not recognized. -c and cid

Similar Questions

• This attribute is not recognized autoCancel = "disabled" >

  Hi all
  
  I used the autoCancel = "disabled" property to popup, it works when I deployed on weblogic console my local instance of Jdev11.1.1.4.0 integrated.
  
  < af:popup id = "delegatePopup".
  contentDelivery = "lazyUncached" = "disabled" autoCancel >
  < / af:popup >
  
  But even does not work when I deploy on different stand-alone weblogic server.
  IAM getting this error "this attribute is not recognized autoCancel ="disabled"" > "".
  
  
  But when I put the default, any action on Popup, it closes the Popup window.
  My requirement is that only when the click on Ok and the Cancel button, the Popup would end.
  Please let me know any work around this problem of fixing.
  
  
  Thank you
  Bardet
  
  Published by: kbnaraya on April 19, 2012 02:35

  The installation guide is located where you download the adf development performance for your wls (http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html)

  Timo

• Pagination of the ADF - ScrollPolicy attribute is not recognized

  Hello

  I'm having a problem of paging in my application. The application is developed with JDeveloper 11.1.1.7 and I followed the steps of Andrejus Baranovskis Blog: ADF 11 g PS6 - ADF 10g Table Pagination feature is back finally.

  On my local Weblogic Server, I was able to deploy the application and confirm the paging behavior in my paintings, but when I deploy the same application (EAR) on the development environment (Weblogic) I'm not able to validate it because of an unexpected exception when opening the page.

  I found this on the server logs:

  < i > caused by: weblogic.servlet.jsp.CompilationException: could not compile JSP untitled1.jspx

  Untitled1.JSPX:34:57: this attribute is not recognized.

  rowSelection = "single" id = "t1" scrollPolicy = "page" < /i >

  Are there property of Weblogic Server that I need to turn off or to recognize this property?

  Thanks in advance,

  Manual

  Have you checked that the right (11.1.1.7.0) adf runtime is installed on the weblogic environment development?

  The error that you normally get is if you use an older adf execution on the server.

  Timo

• Photoshop CS5 reports that this license is not recognized.

  Hello

  I have an account where I have some licenses of Photoshop CS5. I recently downloaded the old package of Photoshop CS5 and tried to activate, but it is said that the license is not recognized.

  I know the series keys expire, and I'm sure I got the right package.

  Any advice?

  Edit: I also used to have a direct download, but it's a link on the account page for the photoshop package, now gone.

  Since you say that you have a few licenses, this is the case where you have a volume license?  I don't know the technical details, but for some reason any support deny help when problems of volume licensing serial number - they should be no denying help for activation of licenses individual assistance.

  You can try to download a version of license volume through the next page...

  Adobe licensing Web site. Serial numbers | Orders | Accounts

• My Bookmark this page does not. Gray and not black. Need of difficulty.

  I noticed that when I try to bookmark a web page on the Bookmarks tab, 'Bookmark this page' is now gray and not black. Foxfire does not allow me to bookmark a page.

  How can I get this feature restored?
  What's happened in the first place and how can I prevent this from happening again?

  Thank you

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• USB ports not recognizing keyboard and the mouse after sleep

  I have a wireless Logitech and mouse keyboard. These connect to my PC (Vista32) wirelessly via a USB plug small heel I plug into a USB port. Logitech called "Unify" which, according to them, is standard to connect devices through a USB port. My mouse and keyboard work fine when I restart my computer, but when he goes to sleep and I me re - wake up there that they do not have. I force power off of my computer because I can't access my account.

  I have ensured that the selective suspend setting in settings usb in advance power settings is disabled. Support Logitech seem unable to help him.

  Hey Sinclair,

  You can refer to this link suggestions and answer us with the State of the question.

  A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation

  http://support.Microsoft.com/kb/928631

  Also refer to this link: How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume

  http://support.Microsoft.com/kb/953367

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps.

• SD card not recognized player and a blue screen.

  Hello world

  I have a Toshiba Satellite M305D - S4830 Vista 64
  When I insert an sd card into the card reader internal sd, nothing happens. The map does not even appear in my "computer". If I leave the sd card plugged in for more than an hour or two, I get a blue screen with an error message and my pc stops. This also happens when I'm using a USB device, but unlike the sd card, usb works fine until the pc stops.

  I tried to restore point, remove the drivers and reinstall them, I even reformatted the hard drive and started from scratch. Nothing worked - all patches

  Thank you

  Hello

  What is the BCCode or the Stop Code on the blue screen?

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Check it for your mistake?

  Windows Server 2008-based computer: "Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED"
  http://support.Microsoft.com/kb/954589

  -----------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then proceed as follows - start with a card in it, so all are displayed.

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Now bring the controllers USB - right click - UNINSTALL everything in category 1 at the time
  EXCEPT the category itself - when all are deleted - REBOOT. This will refresh the USB driver
  stack.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific device
  If it is present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  also if necessary later:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.
  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  =============================

  To collect information on the blue screen.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  Hope that helps.
  Rob - bicycle - Mark Twain said it is good.

• Full computer CS6 download says not recognized image and does not open

  I downloaded the new software for CS6 update (several times), it seems that Akamai is does not download with it.  The file is 2.15 GB. When I double click on my Mac says unrecognized image. Failed to install.  It worked perfectly on my laptop but will not be installed on the desktop. Help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• AVT Marlin not recognized by measurement and Automation Explorer

  Hi all

  I use an AVT Marlin F046B on Windows 7 and sometimes this camera is not recognized by Machin Vision: measurement and Automation 5.0 (MAX), no IEEE 1394 devices is displayed.

  This problem appears randomly. When the camera is not recognized by MAX, if I use the driver of the TRA for IEEE1394 card, the camera is recognized by AVT SmartView and when I installed the driver of return of Microsoft for IEEE1394 card, the camera is not always recognized by MAX.

  Could there be a problem of compatibility somewhere?

  Thanks in advance,

  Hello gege91,

  It is a driver problem Windows 7. Please see the following link for more details:

  http://www.alliedvisiontec.com/EMEA/support/knowledge-base.html?tx_nawavtknowledgebase_piList [uid] = 1...

  Oliver

• AppleTV not recognizing HomeShared library

  Hi all, for those who have seen this message in its previous location, I decided to move it. Why it is here, no one responded to it in the sharing category then I hope someone help here.

  My apple TV (3rd gen, A1469 model, software version 7.2.1) does not recognize HomeShared of my laptop or desktop, libraries that have both different downloaded content.
  Now, until someone comes up with a copy paste of the troubleshooting page.
  All devices are on the same network.

  All devices have home sharing enabled.

  All devices use the same account for sharing and itunes.
  I restarted the router.

  iTunes is open on both computers all the time.
  I restarted the devices in all possible orders.

  Now, I thought the appleTV was not only interact with other computers, but I can't airplay on both computers to the AppleTV.
  Now, at first I thought that the ATV was just streaming on the internet and not in fact the computer, so I forced to through the option 'Read iTunes in the cloud' Airplay (I have set Auto Off). AirPlay works always.

  So, which leads me to conclude that it can interact with computers, but simply refuses to acknowledge their library for roommate for some reason any.

  Anyone had this problem before?
  Any help is appreciated. Thank you

  Have you checked the necessary computer firewall for home sharing settings. I don't link to the troubleshooting page, since you have already seen.

  You are the poster of this Apple TV not recognizing my iTunes (shared hosting) libraries? You have very similar writing styles...

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• message usb device not recognized guard appearing, none of our devices work

  None of our usb ports work so that we cannot use the printer, mouse, or plug in our camera we get the message this device is not recognized. We have a laptop

  Hello

  Check the settings/configuration (BIOS/CMOS) that get started - often F2 so watch you start screen.
  Check that the USB is enabled. If these methods fail you will need a real computer store
  (not the leeks and the glances at a BestBuy or other big box stores) or Technical Support from the manufacturer of the system.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. You can remove all instances of any individual device and then restart to see
  If this device activates.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get-pool is not recognized as a cmdlet command, function or a script...

  Hello!

  I am trying to automate surgery recompose. I had trouble getting the Get-pool command to work; the strange thing is that other commands will work. For example, some of the things I can do are:

  SE connect-VIserver

  Get - VM

  New-Snapshot

  Yet, for some reason, I can't Get-pool. I googled this and tried to look through several forums, but I keep hitting a wall. When I do a get-PSsnapin-registered, I see not registered the following:

  VMware.DeployAuotmation
  VMware.ImageBuilder

  VMware.VimAutomation.Core

  VMware.VimAutomation.License

  VMware.VimAutomation.Storage

  VMware.VimAutomation.Vds

  WDeploySnapin3.0

  My research has shown me that, for the cmdlet Get-Pool, the VMware.VimAutomation.Core was necessary. I also ran PowerCLI as administrator. I even tried the PowerCLI upgrade to 5.8. Why this cmdlet is not recognized? I find it odd that I can take a picture, but I can't reconstruct a pool. Any help would be appreciated!

  Thank you!

  ~ Justin

  I'm afraid that no, the view cmdlets come in a separate PSSnapin (called VMware.View.Broker) which is only available on the connection view servers.

  In my post, as described in method 1.

  Note that these cmdlets work only in PowerShell 2 or in a PowerShell session that starts under a Version 2 session.