This Configuration of the laptop will work for editing with Premiere CS4 ACVHD?

Similar Questions

• Ciniform is always the way to go for HD on Premiere CS4 editing?

  Hi all

  I may have an opportunity to make a film India shot in the P2 HD 1080 p.  However, I have a few questions...

  0 can you Premiere CS4 read and edit MXF files?

  1. I don't know if my first CS4 it system will handle natively without using an intermediate codec as Ciniform. The files have already been transferred to an external drive that I'll then copy the video player my systems. Here is my current configuration of the system:

  . First CS4

  . Windows 7 x 64

  . 12 GB DDR3 ram

  . Image Intel 920 processor

  . 1 TB (2 x 500 GB) video player

  . disk of 1 TB (2 x 500 GB) of storage.

  2. the customer is not sure that cadence, the clip was shot in 24 p or 59 p. Is there a way to determine the correct frame rate so I can choose the first screening in good? I may be able to use VLC to view codec information.

  PR CS4 publishes P2 media like butter.  P2 one of the best HD codecs to modify.  MY HUMBLE OPINION

• How better and easy to capture VHS for editing in Premiere CS4?

  I've got some tapes VHS in 2000 that I really want to get into the Premiere CS4.  I have a large Alienware that runs on Win10 and I also have a beautiful G raid external hard drive.  I read on Amazon on some of these gadgets that you plug into your VHS machine and it has a USB port on the other end.  It seems that the comments are sporadic, so I wonder if anyone knows the best way to collect those VHS tapes?

  One thing I don't want to do is open my Alienware and put a plank in.  I am not mechanically inclined to do.  In any case looking for suggestions, etc. who would work with a Win10 machine.  Thank you.

  [title published by mod]

  If you have a Firewire connection, he should work on W10.  You may need to use the legacy Firewire driver:

  https://www.studio1productions.com/articles/FireWire-1.htm

• Make the PDF portfolio compatible for editing with earlier versions of Acrobat

  I built a PDF portfolio in Acrobat X Pro, and then sent to a person running Reader v9 and they can't change it (and must). Is there a way to save the PDF portfolio down so that they can edit it?

  Why is Adobe making this so difficult?

  PDF portfolios cannot be edited in Adobe Reader, period.

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• I had a HP with XP Media Edition on this, got angry and destroyed someday drive hard, but always have the key, the key will work on another form of XP?

  As I said, I always have the key for it. But does not know if the key will work on just a normal copy of Windows XP? Also cannot find a download of XP? Guess that's what happens when you wait 17 years to ask about it.

  If your computer was HP and it came with this version of Windows installed, then you probably have an OEM of Windows version.  An OEM key does not work for a retail install the version of Windows.  To reinstall Windows without owning a set of install CD/DVD from HP, you will need to contact HP for help as they regulate the licenses Windows installed on their products.

  HTH,
  JW

• In devices and printers, I have an icon for a laptop with a yellow exclamation point. I have a desktop computer and remove this icon of the laptop.

  A laptop once was connected to my desktop via USB cable PC; It belonged to me.  The owner wants to access its database of the company, but in vain.

  Now, in devices and printers, I have a laptop icon that is not one of my devices, but the Device Manager lists in "Other devices" with a (USB) universal serial bus controller, which is also included in the icon of the computer laptop properties under the material.  The yellow exclamation point is for troubleshooting.  The problem is: I do not own a laptop device.

  I want to remove the icon of the laptop and its inscriptions, including the (USB) universal serial bus controller.  Both are marked by a yellow exclamation point, but, of course, they do not work because they do not exist.  But this icon of the laptop has name my PC on it.

  My desktop PC should not be listed in devices and printers, does it?

  Hello.

  Open devices and printers right click on the device - remove the instrument.

• I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

  I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

  Hello

  Sorry, but you will probably need to rebuild everything in Animate. Although their timelines are similar in some ways, there is no interoperability between After Effects and animate dashboard.

  Kind regards

  Joe

• looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  Hi Mljohno,

  If you search for items 14, go into products from Adobe, click on 'Buy' in front of the name of the product and use the drop down menus to specify Mac or Windows full version or upgrade.

  Best,

  Del

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• My laptop will work fine CS5?

  Hello all and thanks in advance for your help.

  I am not well informed when it comes to computers and apologize. I was wondering if you could help me determine if my laptop will work fine CS5.

  I have a laptop of 2 years. Its a Dell Latitude E6400, 14.1 "display, Core 2 duo processor (2.53 ghz), 8 GB RAM and 320GIG HD

  Do you not think that this will be enough umph to run CS5?

  Thanks a lot for your comments. I really appreciate it.

  my best,

  Rick

  It should be. I have an Acer with similar specs and run CS4 with few problems. You will probably want an external monitor to use when you're not on the road and some sort of external storage.

  There is also a problem with some laptops (including mine), to hold the space bar makes the unusable trackpad, until the space bar is released, so you can not change the hand tool temporarily. This problem does not arise if you use an external mouse or tablet, then you probably want one of those, also.

• Bluetooth headset will work for Motorola Cliq 200 MB?

  Hello

  Bluetooh Headset will work for Motorola Cliq 200 MB? I plan to buy a headset Motorola S10 - HD Bluetooth stereo to connect to my Motorola Cliq MB 200... I don't know if it will work or not... Can someone please confirm this for me, so that I can go ahead and buy this one?

  Thanks and greetings

  Srini

  OK, I'm just home from work. I found that the cliq is compatible with

  The S9 and S10 as shown here http://www.motorola.pairxusacom /? l = 28 & a = 0 & pp = 910 & sm = 61 & sp = 1135 & j = 68551 & jd = 1320761931000 & w = 13fzse

• Put Google Adsense on a Webworks app will work for monetization?

  Put Google Adsense on a Webworks app will work for monetization?

  Seen litters applications android with google ads, does this work?

  Is there already a BB10 APi for ads?

  Hello

  No ads API immediately for BB10 WebWorks.  As far as I know, you could use Adsense since you essentially build a web - app on the device.  I used OpenX myself in the past in WebWorks without problem.

• What will happen with my agent and active Windows 8, I will have bought with the laptop after I swap HDD with SSD?

  Original title: replacement disk and windows.

  Hello guys.

  I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?

  I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.

  Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?

  The laptop I want to buy is an Asus if that helps...

  Thanks in advance...

  The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.

  Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.

  J W Stuart: http://www.pagestart.com

• The tolerance setting works for the "Convert anchor point tool"? Are there other ways?

  Hello
  I wonder if the setting "tolerance"in the preferences only works for the arrow tools?» I put it to 8 pixels and it seems OK for these tools, but when I use the tool 'Convert Anchor' point it is incredible difficult to hit a point for me. It seems that I have to hit a point exactly one pixel, which is hard with a screen high resolution.
  My PC keeps beeping all the time and I'm getting crazy on this subject...
  It seems that the framework of tolerance doesn't work here, I'm right? There are other parameters that could help me to work with this tool?

  Sorry if this is the kind of a beginner question, I have much experience with PS and LR, but not so much with Illustrator (and I couldn't find anything useful in the internet).

  Thank you
  Raschko

  I agree, it is sometimes difficult to click on the sweet spot. Here are 3 proposals:

  1. Pay attention to the cursor icon. This will change when you are on a point anchor or direction.
  2. Try to turn on 'bearings commented. They can be a nuisance, but they are sometimes useful.
  3. Use the button "convert" on the Options bar. They may take a little longer but they are full-proof, moreover, you can convert or remove several selected points simultaneously using this method.