This VI belongs to a class of LabVIEW. No part of the class is executable at this time, because one of the screws is missing. However, I'm not missing a vi

Similar Questions

• How can I fix this error message, the address has not been understood Firefox doesn't know how to open this address, because one of the following values for protocols (connectag

  We have a new computer and I can't get my watch running from garmin for synchronization with mozilla. The error message I get is "address not was heard.

  Firefox doesn't know how to open this address, because one of the following protocols (connectagent) is not associated with any program or is not allowed in this context.

     You might need to install other software to open this address."
  

  Help please

  Hi grranchgirl, if you have an "Always enable" and "never activate?

  I don't know if the terms 'modern' and 'classic' mean anything to you, but there is a thread on the Garmin forums that might be useful - it is very long and I didn't read it all.

  https://forums.Garmin.com/showthread.php?79956-modern-Garmin-connect-mostly-doesn-t-work-in-both-Firefox-and-chrome & p = 330634 #post330634

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You mi

  I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You may need to install additional software to open this address. "Someone knows what's going on?

  Please try to download from: https://helpx.adobe.com/creative-cloud/help/install-apps.html. You can also try to download using the different browser.

• A distribution source created in 32-bit LabView 2009, explains that the screws are not executable when opened in LabView 2009 64-bit. How do the main screw?

  A source distribution was made for a VI using LabView 2009 32 bit. The distribution has been verified to work on another machine which ran 32-bit LabView 2009. However, when opened on a 64-bit LabView 2009, the VI was broken as indicated by the error message attached. How can I make the executable VI?

  The VI used the noise and vibrations and HSDL screw that I suspect don't are not supported in 64-bit.

• I can't move the screen on 11 items on a Mac.  The upper part of the application is cut and I do not see the last row of pictures.  I can attach a photo but I don't know how to do this.   have the OS 10.9

  See the attached picture.  I have a picture open but I can't see the upper part of the application.  It doesn't let me scroll to the top.  I can't move the application.  When I click on F3 I can see full screen and can see the photo, but as soon as I click anywhere it goes back to the Cup off the screen.

  

  It is the Organizer? Sorry, but the menu Grab is in front of your screenshot.

  If Yes, go to your username > library > Application Support > Adobe / > elements Organizer/11.0 > organizing status.dat and delete.

  BTW, just for later use, you should not bother with grapple to the general screenshots. CMD + SHIFT + 3 capture the entire screen, cmd-shift-4 and drag to capture a part of it. Here are a few other shortcuts (article is 10.8 but they are the same in 10.9)

• "How can I fix the iCloud" you cannot connect at this time "error?

  I noticed that I was not able to view my use iCloud on my MacBook Pro. To try to solve the problem, I registered on iCloud, but now I'm more able to sign in - it displays you cannot connect at this time. Try to connect again. In addition, I was not able to install anything from the App Store for about a day because it asks me my Apple ID and password and perpetually displays the activity indicator:

  

  Playlists and iCloud tabs are not sync between my Mac and iPhone 6 s either. Strangely, Messages and FaceTime are signed in and it works properly.

  So far, I tried to remove my iCloud Keychain password and delete the folder ~/Library/Application Support/iCloud/accounts - both without success.

  I wanted to create a new Apple ID to test a fresh user, however, create Apple ID link is grayed out and unclickable:

  

  To summarize:

  1. I can not connect on my iCloud account.
  2. Playlists and iCloud tabs are not synchronized.
  3. I can't download anything from the App Store.
  4. I'm not able to create a new Apple ID from my Mac.
  5. Messages and FaceTime are not affected and are still connected.
  6. I tried to remove my iCloud Keychain entry and folder in account iCloud, without success.

  What else can I try? I haven't installed any antivirus software and know that I have not downloaded something fishy to cause a virus problem or malware.

  Try to create a new ID here.

  Apple ID - create

• I have need to know if this file is part of the HP HP software installed, or if it is a file of red.

  What is a native file that HP installs or something I need to delete?

  Hello

  This is part of the HP SW Recovery Manager and is not a virus, inform heuristic to whitelist it.

• I get the error indicating the niajel.dll missing for HSDIO in labVIEW 2010, can someone help how to solve this problem.

  I'm using LabVIEW 2010 and installed the drivers from device LV2010 and try to use the HSDIO functions, while setting the HSDIO function on the block diagram showing niajel.dll is missing, can someone help me fix this bug.

  I tried to uninstall and install not able to set several times.

  Hello. niajel.dll corresponds to the NOR-TClk, although NEITHER-HSDIO does not specifically use it. You use certain functions TClk?

  Also, what other PXI device driver are installed on the system? Could you give a report on the MAX system?

• LabVIEW crashes when opening the project

  Hey guys,.

  I'm running into an interesting issue where LabVIEW crashes when you open a project. This is the second time I encountered this problem on the same project. To get around it the first time, I simply deleted and remade my project, but since it happened again, I need to find a way to debug it. The symptom is that LabVIEW will crash at the opening of the project (sometimes I can see the screen "loading the vi") with no indication that the accident occurred. It does not even launch the reporter of the error, the process just dies. Anyone know how I can go about debugging it?

  xkenneth86,

  What version of LabVIEW? Have you had previous versions of LabVIEW on your computer? You can attach a screenshot of the accident?

• LabVIEW TEN compared to the speed of development system

  Hi all

  I worked on some software labview, which is called by Teststand. The target system has a labview license so I was not initially concerned by the RTE, but then after working with another company, I discovered that they were creating their VI then in turning them into .NET Interop assemblies and calling those rather than directly to the VI. When I asked them about this, they said they did it because he had run more quickly using the RTE rather than the full development system.

  My question is has anyone know if through the VI RTE is actually faster? If so can I just change the setting to use the RTE and reach the extra speed of the Teststand adapter or changing to an Interop Assembly .NET would be necessary?

  WARNING: I am a material engineer who hated the programming, but try to learn it as fast as I can now that I don't have a software engineer. While I'm not familiar with some concepts/terminology/best practices so patience is appreciated

  All things being equal, an executable will go faster because debugging (default) stops on the code. This will make faster, more when debugging is disabled, there is more the optimizer can do during compilation. Or that's the theory. Personally, I never noticed the difference.

  Mike...

• allocation of an array of 2d in labVIEW and move to the DLL function to obtain data

  Hi all!

  I searched a lot about this, but one cannot find any solution. Please find attached the vi that I try to get a unit of 32 channels data,

  100000 samples per channel with 14-bit resolution. And please also find enclosed the header for my dll file. (in the header, it is the GetBuffers function).

  There is not a lot of data, it is a little more then 6 MB in the task of LAbVIEW Manager eats about 30 MB more memory, then it should. Are there explanations why?

  Because there is much more data in a single channel (million samples or more)

  Then I will try to allocate a 2D to data array, but when I try to run my LabVIEW vi crashes.

  Could you please help?

  Best regards

  Tomzi

  Dear Tomzi!

  To allocate the data in a table in LabVIEW, you must always initialize, as in a you must have a valid entry on cell (x-, y - 1) have a size of table of (x, y). It is usually best to use the function Array initialized for this purpose.

  There are ways to pass arrays 2D to DLLs, cand find you examples of both in examples > communicate with external Applications > external Code using the > integrating DLLs > DLL.vi call. Basically, LabVIEW can pass in the form of a big table 1 d 2D tables, so you'll need to spend too much table size index it. If you pass the array 2D handles it is preferable to use the typedef that LabVIEW generates for you, something along the lines of

  / * LabVIEW created typedef * /.
  
  typedef struct {}
  
  	Int32 dimSizes [2];
  
  	Double elt [1];
  
  	} TD1;
  
  typedef TD1 * TD1Hdl;

  I hope this helps.

  Best regards:

  Andrew Valko

  NOR Hungary

• How to combine real-time video with LabVIEW indicators so that the video can be displayed and saved with the overlay data

  Let's assume for the moment that I can find a device for which LabVIEW has the appropriate drivers.  Is it possible to combine the camera feed with digital indicator fields so that there is a video out showing the data superimposed on the live image?

  I'm talking about something like a screen of the camera where you see the camera settings are displayed on the image in the viewfinder.  Note I have one isn't about analysis of video data or somehow reading parameters of the camera to the camera.  Data would be temperatures, pressures, speeds, etc., acquired by different instruments at the same time the video is captured and processed somehow by LabVIEW.

  No problem Wildcatherder, don't let me give you an overview of the process.

  When you get a video acquisition method entry, it will be an image format. Essentially, it's a bunch of images that are updated at the speed of video capture, just like the material. There are screws express (wizard - like elements) that simplify the obtaining of images from your video source. With the drivers and measurement and Automation Explorer installed, you should be able to get at least the image.

  If you have IMAQ toolkit, I mentioned, you could just wire the reference image (a purple wire wavy) and a text input (say, a temperature that is converted to a string) in the text overlay VI and it would produce the desired effect. Without this, you will need to convert the Image into image (these are two different data types in LabVIEW) and use the image instead, editing tools (essentially replacing pixels in 2D image data). You would then update an indicator of the photo with your photo altered, if all goes well to the pace of the acquisition hardware. As I said this is less elegant and can take a certain amount of time processor. If you view these images at all and are just their routing, it should be slightly faster.

  I don't know about video production equipment, I mainly used entry Firewire or USB, the computer screen or the file data. However, if the driver exists, it should be possible, but a quick review of the functions doesn't seem to come with output functions. Cannot advise on hardware, but you can start with:http://sine.ni.com/np/app/main/p/bot/no/ap/vision/lang/en/pg/2/sn/n17:vision, n21:11600 /?

  Kind regards

  Mello

• get all the screws in memory on multiple instances of application LabVIEW

  I try to get references to all of the screws in memory on multiple instances of LabVIEW application. Specifically, I'm trying to get the VI Refs screw (and their subVIs in memory) in another Explorer of projects at design time. (The other screws do not work.) For example, if you are only interested in VIs in the current instance of App (read the Project Explorer), you can use the following code:

  

  However, if you have multiple projects open, how can you get the references VI to the screw in the other project? It seems to me that it would be an another App Ref, but I guess I don't know how to get this reference. I'm assuming that if I could get this reference, I could use it in the same way as above for the list of App.AllVIs.

  Any help/clues would be appreciated. Thank you.

  I just tried the code below.  It runs in a single project; I have also open a second project with more than 300 screws and it opens a reference to each one without any error.  Are you the application instance reference wiring open Reference VI?

  

• LabVIEW function to detect the 32 bits (X 86 Program Files) vs 64-bit (Program Files) of the system?

  I'm looking for a function to LabVIEW that detects if the system is 32-bit or 64-bit.  The reason is that I need to change our paths to shoot either the X 86 Program Files folder or in the Program Files folder, I prefer to do this programmatically so they don't have to do it manually every time.

  Thank you.

  I have it.   Thank you

  http://forums.NI.com/T5/LabVIEW/win-OS-type-bit/m-p/1534730#M569747