Thunderbolt Display (27-inch) A1407 - it can connect to a Windows PC with an adapter any?

Similar Questions

• Thunderbolt Display 27-inch TV using the HDMI port Minidisplay

  My setup is macbook air, Thunderbolt Display, 55 inch TV.

  Wanted to know if I plug Thunderbolt display on TV through HDMI Adapter Mini DisplayPort / (Thunderbolt), it will be able to display of Macbook Air, Thunderbolt display and TV even time?

  Thank you.

  The Thunderbolt ports and displays: frequently asked questions (FAQ) - Apple Support

  An alternative would be to buy an Apple TV, then use AirPlay on your Mac to stream content both Thunderbolt display, Mac and TV, but the TV must be HDTV.

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• After logon Windows 7 my PC starts but displays the directed message "unable to connect to a windows service.

  Continue message "Windows does not have to connect to the System Event Notification Service service.»

  Unable to connect to the internet or home network. Cannot 'see' router, although only connected by LAN & Wireless N adapter (even if the wireless adapter has stopped working since the problem occurred).  Router is fine as I can connect the laptop to wireless internet and LAN. The PC is very slow and the glass on the toolbar icons have been replaced by the standard version. Most of the software on the PC runs but I can't access to things like the event log.

  Running SCF / Scannow. CHKDSK and made a complete analysis with Zone Alarm Extreme Security which none have discovered something wrong. I wonder if it is a virus on Board that is not windows & cannot be treated within MSDOS.  If this is the case how get Zone Alarm to sweep to the back?

  My system is 64 bit, with Intel CORE I7 clocked at 2.8 GHz, 8 GB RAM & 2x1.5TB disks in a RAID 1 (mirror) configuration.

  Any help ressemelable the problem would be appreciated

  Hi Clem,

  1. you made any hardware or software comes to the computer before the show?

  2. is the computer connected to a network domain?

  This problem occurs when a new disc is added to the system while the background services always begin.

   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  You can check if System Event Notification Service is enabled and set to automatic.

  
  Steps to follow:

  1. click on start, select run and type services.msc

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.
   
  Method 2:
  Download and apply the patch using the link:
  The Office will not load and displayed only a black or blue background after you log on to a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/2590550
   
  Method 3:
  a. click the Start button.

  b. type cmd in the search text box.

  c. press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  d. type netsh winsock reset in the command line shell, and then press the Enter key.

  e. restart the computer.

   

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  For assistance with Zone Alarm, publish the query in the Forum Zone Alarm.

  Reference:

  http://www.ZoneAlarm.com/security/en-us/community/user-forum-agreement.htm

   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• You can connect Apple TV thru or with decoder

  Can hang you with an Apple TV cable box at the same time

  Depends on your decoder.

  Apple TV using HDMI.

  If your cable box has a HDMI passthrough you can connect in this way.

  Otherwise, why would you want it to go through the cable box?

• I can connect to my Hotmail account but cannot open any message. I tried to delete cookies, but not luck. Any thoughts?

  Original title: I have a DELL laptop-WINDOWS XP - and I CAN GET IN MY HOTMAIL ACCT, BUT I can NOT OPEN MY MAIL!  I TRIED to delete Cookies - OF IDEAS?

  I have a DELL laptop. WINDOWS XP - periodically in this case, I can connect, BUT cannot NOT OPEN MY HOTMAIL! I tried clearing COOKIES-Any THOUGHTS?

  Hello NEWYORKCITYGURL,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  Thanks for posting to NEWYORKCITYGURL of Microsoft answers!

• I can connect to my Windows Live Hotmail, but cannot open any mail as they are all marked.

  all mail is marked

  original title: can acess hotmail but cannot open the mail

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• RV082 with QuickVPN can connect to the Windows Server but not on Ubuntu Server

  We have a RV082 and are capable of using QuickVPN to connect and access our work LAN (192.168.0.0) except that we can not connect to a Linux Ubuntu Server on the local network.  Can ping (and shared access) servers Novell, a Windows 2003 server and several printers but not the linux server.

  192.168.0.1 Novell server can ping

  192.168.0.2 Server Linux ping or you connect

  192.168.0.3 Windows 2003 server can ping and connect

  192.168.0.4 - 11 different printers that I can ping and install

  I can ping and connect to the server using PPTP-Linux

  Troubleshooting tips will be greatly appreciated

  Good afternoon

  Review of your question, it would seem at first glance that the Ubuntu Server may be blocking incoming VPN traffic. I'm not sure of what firewall program you have chosen to use with your server Ubuntu, but make sure the ports 500, 4500, 443 and 60443 are open to traffic entering this subnet. If you can detect all the errors showing blocked traffic trying to hit the server, which can be useful in allowing us to determine why this traffic does not go through.

  Thank you

  -Lindsey

• I can connect OK to Windows Live Messenger, but the Messenger pop up still have the loading circle constantly on.

  Original title: loading windows live messenger.

  Can I sign OK, but the Messenger pop up again a loading circle constantly on. I have no control over the Messenger at all.  I HAV done a shoot of disorder and he just incompatible application. can someone tell me how to fix here

  Hi stevethe,.

  In dealing with the problem with Windows Live Messenger, I recommend you post your question in Windows Live Solution Center for assistance.

  Portal Messenger

  Hope the helps of information.

• NT AUTHORITY\SYSTEM can connect to other windows computers.

  I am trying to run scheduled jobs to THE command that will empty the files from one server to another.
  The thing I want to know here, it is a job scheduled with the AT command be able to generate the data that the task runs with the NT AUTHORITY\SYSTEM account on a local system planned by AT.

  The work will be able to run?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• When vmware tools can be installed on windows 8 with the display driver

  Hello

  I have problems with the installation of vmware tools on my windows virtual machine 8 in 9 workstation, and I see that this is a general problem.

  So when will there be an upgrade for it?

  Thanks in advance

  Carsten

  So when will there be an upgrade for it?

  It will be the point in time that he came out and not before! (VMware does not disclose this kind of information by their policies.)

• Tecra M5 PTM51E - How can I change the BIOS only with the adapter?

  Hello

  Sorry for my bad English...

  I'm trying to update my bios by this file
  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090113151143.zip

  Who fail, the message is:
  Error the AC adapter is not establish a connection, or battery power is not enough.

  I do not have the battery :-(he died a few months ago

  What can I do?

  Hello!

  And what do you think on the point of buying a new battery?
  I mean in this case nothing you can do and another way to update the BIOS is not known to me.

  In addition, now you can t mobile work with this laptop because you don t have a battery, so I think that a battery would be a good buy.
  You can get one for example authorized service.

  Good bye

• How to share printer connected to the Windows XP with Windows 7 computer

  Original title: printer problem

  I have a HP USB printer connected to a PC running XP.  My wife has a laptop and connects to my Internet connection through a router.  Is there a command in XP that will access the printer even though it is not wireless?  The laptop is running Windows 7 and using Microsoft Home and Business 2010, and therefore the PC.   I was told that it is a command, but can't find it.

  Hi BudRamey,
   
  Share the printer from Windows XP for use with Windows 7 as well.
   
  See this link for more information on this operation:
  How to use Windows XP to share a printer with other people on your network
   
  Additional reference on:
  To share your printer 
   
  Once you share the printer from the computer Windows XP, select the wizard file sharing and printers in Windows 7 as well.
   
  Refer to the section "to turn on network discovery, file and sharing, printers and files public sharing under Windows 7" from the link given below to do the same thing.
   

  Networking of computers running different versions of Windows

• No connections avalible on windows 7 with a working wireless adapter.

  That's what happened. I was in a Skype call with my friend and we had a connection error after about 30 seconds. Immediately I thought that it was my internet because my internet was very uneven, lately. After resetting my router and comeing back upstairs, I had the No. are networks avalible on my screen. Initially I thought that the proablem lied through my system services application, because that's where I set the proablem last time I had this proablem. What I did after that was I have activated the service autoconfic wwan and wlan autoconfiguration service. Has nothing. According to what I've done, I went to control panel and pass to solve my adapeter wireless even if it has been enabled and connected. Then I went in my device manager and tried to update the drivers on my adapter wireless by uninstalling it and then put it back. Then I noticed that teredo tunneling Pseudo-Interface was defective. I went to check and saw that he cound not start and had an error code 10: cound device does not start. I went to google and learned how to turn it off, and I did. After that he appeared more in the Device Manager which is ok because I thought that it would fix the internet. He did not.before all this I did a before a "critical update" windows system restore but that also did not help. I started running out of options. Please help me.

  It seems to me, of course, that your wireless network card is toast, no matter what that says Device Manager.  However...

  I didn't ask and you don't mention what you use a wireless router.  Is it possible that the router configuration has changed to the Wireless-N only, Wireless-B only, or some other setting with no Wireless-G?

  Indeed, is it possible that your wireless router has its section wireless disabled or broken?  Do you have any other wireless device that you can use to determine if the router is working OK?  If possible, test with a device near your desktop (it sounds as if your router is at some distance away).

  MalwareBytes AntiMalware (free) is not an antivirus.  It's a scanner antimalware on demand/remover that is intended to be used with an antivirus program.  See https://helpdesk.malwarebytes.org/hc/en-us/articles/201861736-Does-Malwarebytes-Anti-Malware-replace-antivirus-software-

  Similarly, for Windows 7, Windows Defender is an anti-spyware program and not an antivirus (Microsoft makes things very confusing by reusing the same names for different products).

  If these two are security programs only you, your system is vulnerable, and you must install a real antivirus program.  Free offer of Microsoft - Windows 7 - is Microsoft Security Essentials.

  For now, I suggest that you run the ESET Online Scanner (free), but I don't think that malware is the cause of your Wi - Fi connection problem.

  D - Link does not appear to be any drivers for the Rev B of your adapter for what version that went Windows XP 32-bit.  D Link says that you should connect to the Internet using your wired LAN connection and get the driver right from Windows Update.  When you uninstalled and reinstalled the adapter using Device Manager, have you checked the box to delete the driver software?  If this is not the case, do it and then try to reinstall.  You need to be connected by an Ethernet cable in order to re - download the driver from Windows Update.  See http://www.dlink.com/uk/en/support/faq/adapters/usb-adapters/how-do-i-install-my-wireless-adapter-correctly-in-windows

  

  I doubt that D-Link updated its Wireless Configuration Utility for Windows 7, but if that was the case and that you use it, disable or uninstall (check Control Panel > programs and features).

  Other than the above, I'm sorry but I'm out of ideas.

• I can up grad to windows 7 with vista? It shows that I have windows 6, but have 2 pack

  It shows that I have windows 6 have pack 2

  Hello

  Yes, you can upgrade to Windows 7 from Vista. Check below the link to the FAQ on this subject.

  http://Windows.Microsoft.com/is-is/Windows7/upgrading-to-Windows-7-frequently-asked-questions

  Hope this helps,