Thunderbolt to Gigabit Ethernet adapter not working

Similar Questions

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• Z460, Ethernet does not work after wakes up after hibernation

  Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?

  Thanks for reading!

  try reinstalling power management, the default settings of the bios and also try this:

  Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• Ethernet port not working is not on the printer

  Does anyone know if a TCP port can be replaced.  It seems difficult to enter the machine corresponding to this connection.  The repair outweighed a new purchase?

  Hi VickiCorwin,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand the port Ethernet does not work on the printer and you want to know if it can be changed.

  I'll be happy to help you.

  I don't think you'd be able to order such a piece for this model.

  You can test the NIC by plugging the ethernet cable into the printer and computer to see

  If it gets a valid IP address. Try another Ethernet cable.

  I recommend you contact HP Support for help to see what other options are

  available for you, you can also find out about trade and trade program.

  Thanks for posting on the HP Forums.
  Have a great day!

• So, updated for Win 7. Clean install. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

  Clean install. 2 problems. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

  Probably you run first win7 Upgrade Advisor, who did you would probably show your system as not supported under win7

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Ethernet port not working not not on Qosmio G30 102

  Whenever I try to connect to something using my ethernet port only an orange light comes on at the back and nothing is recognized as being fixed.
  Is it a hardware fault or software? : S

  Also the power cable is connected

  Thanks in advance

  Hello

  In your case, I would first check device manager if the network card has been installed and recognized properly.

  In addition, you could remove the card from LAN from the list of devices and reboot the laptop. After restarting again the operating system should recognize the LAN card removed. Also you must download the driver of NIC in the Toshiba page and needs to be reinstalled it

  Last but not least, you should check your router settings may be possible not the network adapter does not work correctly but your router!

  Check it out!

• HP compaq 6530 b ethernet does not work

  I have a laptop hp compaq 6530 b. A few days ago, I installed it for the first time Windows, in particular Windows7 Ultimate 64 bit (I used Ubuntu). Since the ethernet connection installation does not work (so that wireless gives no problem) although I installed all drivers HP hp websites...

  Can someone help me?

  Thank you

  Ciao,.

  You can go back and enable this setting. I assumed that you had installed the drivers.

  LAN save mode power turns off your wired ethernet card to save battery when it is not connected to an ethernet cable.

  People get alarmed when they don't see the wired ethernet controller, which is listed in Device Manager when there is no cable connected, and they think their wired network adapter is defective.

  When you disable the LAN power save setting, always wired ethernet controller is on and remains visible in the Device Manager if a cable is connected.

  Now in regards to the pilot, you must...

  It can be found on the link below.  Select windows 7 x 64 driver file.

  http://www.Broadcom.com/support/ethernet_nic/netxtreme_server.php

  Paul

• Broadcom netxtreme 57xx gigabit ethernet is not supported to install esx 3.5

  Hello

  I use my laptop Dell E5420 workstation 6. When I try to install esx 3.5 in my computer, it's show error message as port of networking is not supported. Then I tried to install esxi 3.5 in the same system. His installation, but I have not found all of the network adapters. Physical system I have broadcom netxtreme 57xx gigabit ethernet. I changed little in vmx file, but not all.

  Please help me

  I hope that you use WS 6.5?
  you will miss at least the line

  ethernet0.virtualDev = "e1000".

  Take a look at this vmx - worked in nice on Workstation 6.5

  config.version = '8 '.
  displayName = "esx35i."
  ethernet0. Present = 'TRUE '.
  ethernet0.virtualdev = "e1000".
  Ethernet1. Present = 'TRUE '.
  Ethernet1.virtualdev = "e1000".
  floppy0. Present = "FALSE".
  guestOS = 'other '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-image".
  IDE1:0. FileName = 'VMware-VMvisor-InstallerCD - 3.5.0 - 82664.i386.iso.
  IDE1:0. Present = 'TRUE '.
  memsize = "1024".
  Monitor.virtual_exec = "hardware".
  monitor_control.restrict_backdoor = 'true '.
  numvcpus = '1 '.
  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  scsi0:0. FileName = "esx35i - system.vmdk".
  scsi0:0. Present = 'TRUE '.
  Sound.Present = "FALSE".
  virtualHW.version = "6".

• Maid in Gigabit Ethernet Adapter

  Hello

  I bought a bolt of lightning for gigabit ethernet card.

  Could someone give me a pointer in the implementation to connect to the Internet using this? Can't seem to get it to connect.

  I use a MacBook Pro el capitan

  Thank you very much

  If the Ethernet on your Mac has stopped working recently - Apple supports

  This might help

• My ethernet does not work. Is this due to a recent security update?

  I've seen complaints (reddit, macrumor.com...) that recent security

  Update "031-51913 Kernel Extension incompatible data setting 3.28.1"

  has 'broken' my on my iMac ethernet connection 2015 later. I decided to buy this machine

  later the 2/26 because my iMac model equipped with mid-2009 seems to be dying, he

  lost its ethernet connection in the afternoon. OFF to Best Buy. The new machine put in place very well, but on 2/27,

  It was suddenly unable to ethernet. Maybe bad software system killed them both! Comments, advice?

  If you read this post, you will see there is a fix you can download.

  Re: Ethernet not working only not with El Capitan

• Satellite A60 - adapter not work and make a beep

  Hello

  Hope this is the right forum.

  I have a laptop Toshiba A60 series, I don't know if his satelliate or A60 Equium, but it is.

  In any case this week adapter does not work. I had plugged and initially it seemed that he was not charging the laptop, even if the light on the adapter on and now the lights and all I can hear is a beep - even when it is not plugged into the laptop.

  My laptop is now to zero battery so I can not even turn on, it's just flashing orange all the time.

  I guess that the adapter just does not? Do I have to get a new adapter? Please tell me I don't have a new laptop of geta - I have some stuff I want to keep.

  Thank you very much

  > My laptop is now to zero battery so I can not even turn on, it's just flashing orange all the time.
  In my opinion, this isn't a problem with AC adapter
  If computers laptops just flashing orange LED power then it means that a (possible motherboard) error has been detected.
  The flashing provides an error code and it can be read by a technician for laptop.

  In your case I would not buy a new AC adapter because you are not 100% sure what case this question. I think the laptop must be checked to see what could be the problem and then you could decide on the further handling.

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.