Similar Questions

• ObjectKeyAssignment@PersonWantsOrg is not met at the time of the request is approved (event: granted)

  Hello

  I have a custom process to be triggered by the licensed event of PersonWantsOrg. The process needs to do something else with the value of "ObjectKeyAssignment" when the request is approved in ITShop. However the "ObjectKeyAssignment" had no value populated still in time the custom process was pulled by the event "granted".

  Is there a way I can capture the value of "ObjectKeyAssignment" in approval of the application when the event granted? Or other workaround solutions? It is v7.0.2.

  Thank you!

  I did some tests in my version and PersonWantsOrg.ObjectKeyAssignment was always filled my 7.0.2 environment.

  The reason not to get the value of your membership Org requested CustomProperty01, it's that accession does not exist at the time the LICENSED event is raised. Means, your code to get the UID_Org does not work because you are using the non-existent number of members for the UID_Org,

  Instead, use the following code to extract the CustomProperty01 from the Org you ask the composition for:

  Dim dboKeyOrg As DbObjectKey = New DbObjectKey ($FK (ObjectKeyOrdered), QERAssign.ObjectKeyAssignTarget$)

  values("CP01") = Session.GetSingleValue (String)(dboKeyOrg,"CustomProperty01")

  You can find more examples on how - to use the object layer in samples of script on the delivery of the product in the folder "Modules\QBM\dvd\AddOn\SDK\ScriptSamples".

• take the time of the request

  Hi Master,

  The query below is taken on time. is there a way optimised to grant this request. his stats are updated and all columns have indexes in where clause.

  SELECT THE PTA. VALUE_N, COUNT (1)

  IN l_disc_multiplier_n, l_count_n

  OF PAYER_TARIFF_ATTRIBUTES PTA

  WHERE ZEP. START_DATE_DT = (SELECT MAX (START_DATE_DT)

  OF PAYER_TARIFF_ATTRIBUTES

  WHERE TARIFF_ID_N = ip_tariff_id_n

  AND PAYER_ID_N = ip_payer_id_n

  AND ATTRIBUTE_CODE_N = l_attribute_code_n)

  AND PTA. TARIFF_ID_N = ip_tariff_id_n

  AND PTA. PAYER_ID_N = ip_payer_id_n

  AND PTA. ATTRIBUTE_CODE_N = l_attribute_code_n

  AND PTA. STATUS_N = CRP_GET_CONFIG_PARAMS. ACTIVE_STATUS

  AND PTA. EVENT_REQUEST_NO_N IS NULL

  GROUP OF ZEP. VALUE_N;

  Concerning

  AR

  Might work this time too (try to avoid calling CRP_GET_CONFIG_PARAMS.) ACTIVE_STATUS)
  

  
  

  SELECT THE PTA. VALUE_N, COUNT (1)

  IN l_disc_multiplier_n, l_count_n

  OF PAYER_TARIFF_ATTRIBUTES PTA

  WHERE ZEP. START_DATE_DT = (select start_date_dt

  RN (SELECT START_DATE_DT, row_number () on start_date_dt desc order)

  OF PAYER_TARIFF_ATTRIBUTES

  WHERE TARIFF_ID_N = ip_tariff_id_n

  AND PAYER_ID_N = ip_payer_id_n

  AND ATTRIBUTE_CODE_N = l_attribute_code_n

  )

  where rn = 1

  )

  AND PTA. TARIFF_ID_N = ip_tariff_id_n

  AND PTA. PAYER_ID_N = ip_payer_id_n

  AND PTA. ATTRIBUTE_CODE_N = l_attribute_code_n

  AND PTA. STATUS_N = CRP_GET_CONFIG_PARAMS. ACTIVE_STATUS

  AND PTA. EVENT_REQUEST_NO_N IS NULL

  GROUP OF ZEP. VALUE_N

  
  

  Concerning

  Etbin
  

• Working with date and time of the request for help from acrobat JavaScript...

  This coming from

  Working with date and time in Acrobat JavaScript (part 1 of 3)

  The following code adds five days to the current date, and then prints the new date in the console window.

  Get the date and time

  var rightNow = new Date();

  Get the value of millisecond

  Article date

  var msRightNow = rightNow.getTime ();

  Calculate in milliseconds, of 5 days

  5 days x 24 hours/day x 60 min / h x 60 s / min x 1000 ms/s

  Challenge of var = 5 * 24 * 60 * 60 * 1000;

  Do the calculation of var CFAbsoluteTime = msRightNow + challenge;

  Create a new Date from the calculated value

  var theNewDate = new Date (finalTime);

  In the actual work on a form code, you'll want to place the

  the object of a field value. But since this is test code, we will

  Print the result to the Console window (great for debugging)

  Console.println ("5 days from now is:" + theNewDate.toString ());

  The foregoing is the exact code (cut and paste)

  The error I get here is;

  ReferenceError: theNewDate is not defined

  1:Console:exec

  undefined

  To get the "undefined" question a lot... it seems to me, learn to distinguish the undefined 'of type' undefined 'variable' and undefined 'value '.

  in this case 'theNewDate' seems to be defined as a variable equal to the current date plus 5 days... BUT I am now "educated" enough to 'see' Why am I getting the error...

  
  

  Any thoughts... Any who...

  You need to highlight all the text that you want to run.

  You have not set the rightNow variable before you can apply a method to the variable.

  You can just add a new variable as msRightNow name. Why not use rightNow.

  Executes the code that you provided with a new departure of Acrobat, I get the following error messages:

  rightNow.getTime is not a function

  1:Console:exec

  TypeError: rightNow.getTime is not a function

  1:Console:exec

  undefined

  What you are showing probably works because your previous attempts have left behind them a variable "rightNow" and as long as you do not have the object of time date change too much, you will not notice the error.

  Cleaning of your code:

  get the number of milliseconds of the date object.

  rightNow var = (new Date()) .getTime ();

  define 5 days in milliseconds;
  Challenge of var = 5 * 24 * 60 * 60 * 1000;

  Add 5 days to the value of this moment and assign the result to the last time;
  var CFAbsoluteTime = rightNow + challenge;

  convert finalTime value in a date object.
  var theNewDate = new Date (finalTime);

  display the result;
  Console.println ("5 days from now is:" + theNewDate.toString ());

  Have you tried the code that I provided, it is another way to add days to the date object.

• decrease the time of the request, please

  Hello
  
  
  I face problem of query below.
  
  SELECT MBRSEP, NAME, RECDSEQ FROM
  (SELECT rnk OF MBRSEP, NAME, RecdSeq, RANK() over (ORDER BY RecdSeq desc))
  (SELECT MBRSEP, NAME, ROWNUM AS RECDSEQ, place OF)
  (SELECT MBT. MBRSEP, MBT. Name, location, ROWNUM RECDSEQ OF
  ((SELECT MD. MBRSEP, MS.NAME, MD. LOCATION OF MEMBERDETL MD, MBRSEPMSTR MS WHERE MD. MBRSEP = MS MBRSEP.)
  ORDER BY 3) MBT)) WHERE RECDSEQ < = '175645') WHERE RNK < = '26' ORDER BY recdseq
  
  
  I need tio display only 26 chronogram .but above to query in the above query by selecting all the matching of the records of the State and 26 records.now filtering I I want to select only the records that 26 only please give me the solution.

  Hello

  I don't know exactly what you are trying to reach here...

    SELECT MBRSEP, NAME, RECDSEQ
      FROM (SELECT MBRSEP,
                   NAME,
                   RecdSeq,
                   RANK () OVER (ORDER BY RecdSeq DESC) AS rnk
              FROM (SELECT MBRSEP,
                           NAME,
                           ROWNUM AS RECDSEQ,
                           Location
                      FROM (SELECT MBT.MBRSEP,
                                   MBT.NAME,
                                   Location,
                                   ROWNUM RECDSEQ
                              FROM ( (SELECT MD.MBRSEP, MS.NAME, MD.LOCATION
                                        FROM MEMBERDETL MD, MBRSEPMSTR MS
                                       WHERE MD.MBRSEP = MS.MBRSEP)
                                    ORDER BY 3) MBT))
             WHERE RECDSEQ <= '175645')
     WHERE RNK <= '26'
  ORDER BY recdseq
  

  Your query is said
  1 order the lines of memberdetl is associated with the mbrsepmstr of the location
  2. give ROWNUM to these results and give it the alias RECDSEQ
  3. assign ROWNUM to these results and give it the alias RECDSEQ (new)
  4 filter these results to ensure that the RECDSEQ is<= 175645="" -="" using="" an="" implicit="" conversion="" to="" numer="" (or="" to="">
  5. apply the function rank on the results and order by RECDSEQ in descending order
  6 choose the first 26 lines again using a conversion implicitly each char or number of char.

  Why do you say that you want to 'only' 175645 lines up the internal result? Also, make sure you get rid you of the "around the numbers. It comes to numbers, no chains.

  Maybe it's better if you show a small selection of the data you have, as well as an example of the result you expect from it.

  David

• So, for the 3rd TIME WHEN I REQUEST SUPPLICANT why NOT update only FF updated my browser?

  You see, I ask myself this same question twice before, because Firefox has once more for the third time last updated browser DESPITE MY PLAIDANT ASK TWICE BEFORE NOT to DO SO. but now I have a platform to make public DISHONESY of Firefox, put to task for defying a very adamant demand, specifically NOT UPDATE MY BROWSER, CIRCUMSTANCES THAT systematically, repeatedly occurred throughout all these years I've been with Firefox since 2005.

  How is it that Firefox continues to deliberately defy, ignore the wishes of its customers most loyal me inflamed beyond words, when I repeatedly made KNOWN QUITE WELL NOT to HAVE MY BROWSER updated.

  BUT NOW, AFTER ALL THIS TIME, TOGETHER WITH THE INSIGHT I HAVE RUN AS ONE INDUSTRY COMPUTER SPECIALIST I know very well why Firefox CONTINUES THIS PRACTICE WITH ABANDON.

  1. they do not like anyone was sleeping with the subject: config (then why did you never included it in the first place) as I do.

  2. they don't like anyone made modules incompatible extensions again as I do.

  3. they do not like someone tampering Firefox as I do.

  And all Firefox should do to reduce to nothing all the meticulous work I spend change about: config. configurations to accommodate my own and the needs of my company and all the hard work. spend time of activation of newly incompatible extensions, I need to work as effectively as possibleamong other things that I tweaked, THAT I EXACTLY WHAT YOU DO for THE REASONS I GAVE. YOU deliberately, to DO so hatefully. And that's the final reason for YOUR contempt total without taking account of the request of a customer. In addition, YOU, fIREFOX feel that since you wrote the code, and the owner of the code, YOU can insist USERS to follow the protocols of Firefox exactly as I ask.

  Another example of YOUR dictatorial to browse the web - what approach YOU feel that no one should dare to take a peek to content that is not the level of WHAT YOU BELIEVE IS purity AND ALL OTHER CONTENT CORROMPRE THE MORALS OF OUR YOUTH.

  In one of the cases where my browser has been updated despite my unyielding position against it, someone in YOUR ORGANIZATION has removed several sites for adults STRICTLY STRAIGHT to my favorites.

  SO now, NOT ONLY DO you HAVE AN ATTITUDE INTRUSIVE big BROTHER THAT NOBODY DARE DEVIATE FROM the OFFICIAL FIREFOX BROWSING PROTOCOLS BUT NOW YOU have put in PLACE A CENSURER CAMPAIGN ON WHAT YOU CAN READ, WATCH at all SIMPLY BOOKMARK or.

  BUT IT IS EVEN WORSE, MUCH WORSE. THE LAST TIME TWO YOU UPDATED MY BROWSER AGAINST MY WILL, YOU GAVE ME THE REASON MORE LAME MORE STUPID, INSULTING, STUPID WHY YOU UPDATED TWICE BEFORE AS IF THEY WERE JUST CIRCUMSTANCES THAT OTHERWISE NEVER WOULD HAVE VIOLATED AS WELL AS THE PRIVACY BEING THE TERRIBLE REBEL COMMERCIAL PRACTICES, ARROGANT AND SIMPLY TO YOUR MITIGATING CUSTOMER. BUT NOW IN ADDITION TO PROVE YOURSELF TO BE A MEGALOMANIACAL SOCIOPATH YOU HAVE REVEALED YOURSELF TO BE ABSOLUTE LIARS CHRONICLES.

  AND IT OF BECAUSE I AM RESPONSIBLE FOR MY COMPUTER SERVICE COMPANY AND HAVE A LOT OF COMPUTERS UNDER MY CONTROL AND SUPERVISION. I HAVE ONLY RECENTLY PASSED ON SOME OF OUR COMPUTERS FROM IE TO FIREFOX AS A TEST AND I AM DEPRIVED OF WHAT HAPPENED BETWEEN THE COMPUTERS THAT WERE USING FIREFOX AS A TEST STUDY.

  AND WHILE THE TRUTH BEING WHAT IT IS, YOU ARE CAREFUL NOT TO MESS WITH MY BROWSER, AS IT IS WELL CONFIGURED TO NOT UPDATE, WHICH, IN YOUR HONOR, YOU GAVE HIM A LARGE DOCK, BUT YOU GRIMLY UPDATED SIX COMPUTERS THAT WERE PART OF OUR TEST STUDY
  WHO HAD THE SAME CONFIGURATION OF BROWSER REQUEST NOT TO BE UPDATED BUT THAT YOU UPDATED HOWEVER. THESE COMPUTERS WERE PART OF A STUDY OF PRODUCTIVITY WHICH, BY UPDATING IT SET ALL THE SMALL EXPERIENCE OF OUR BACK A LITTLE BIT.

  SO, WHAT AM I GOING TO DO WITH YOU? I HAVE TO REALLY THINK LONG AND SERIOUSLY ON HOW TO RESPOND TO AN ORGANIZATION THAT HAS SHOWN NOTHING BUT THE WORST KIND OF APATHY, PRACTICES DISHONEST COMMERCIAL I'VE SEEN SINCE BEING IN THE COMPUTER SECTOR.

  Automatic updates can sometimes damage the files in the profile, and I always read several web for a complaint indicating that it has not changed. This is one of the reasons why I don't like the automatic updates.

• It takes a long time to send the request to print a PDF file

  Whenever I send a request for a PDF to print to a printer, it takes time for the system to respond. It takes even longer for printer receive my print request. Why?

  Read some messages in this forum, but nothing works. Adobe needs to take a look at this issue, it affects a large number of users. For this reason, Adobe Reader sucks.

  Hi mikel007,

  Open Acrobat Reader DC, go to the Help menu and repair the installation.

  Also check the updates under the Help menu. If any please install.

  If the problem persists, try the solutions listed in this KB doc.   Acrobat and Reader help / troubleshooting PDF printing | Adobe Acrobat, Adobe Reader

  Kind regards

  Nicos

• Don't throw Illustrator CC 2014 (could not complete the requested operation) even after the new installation (3 times), someone knows how to solve? (Windows 8.1)

  Hi guys, my CC 2014 Illustrator won't launch, receive an error message 'Could not complete the requested operation', this isn't a problem of specific files, I can't launch independent Illustrator.  I have uninstalled and reinstalled 3 times and contacted support, but they were not able to solve at the moment.  This is a relatively new 8.1 windows installation and none of the custom fonts have been added.  I tried to delete the preferences and launch files and which had no effect.  No idea what I can do, any help would be greatly appreciated.

  Edit: Forgot to mention that I also tried running Illustrator as an administrator and that Illustrator worked perfectly on this computer from the installation (about 2 weeks) before this started happening.

  Thank you

  Chris

  

  baglosh,

  You reinstall using the way complete three steps (the otherwise strange things may persist)?

  (Check the box to delete the preferences), run the clean uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Based on the time of server request

  Hello

  I send a request to a server. If I don't have an answer, I need to send a request once more after 3 seconds. Like this, I need to check 3 times. If 3 rd time also it fails, I need to put an end to the request by sending a message to the client.

  Please help me how to do this. I don't know how to send a request based on that time too for only 3 times.

  Kelifaoui has

  Study using setInterval() with a counter variable.  The setInterval will take care to call a function every 3 seconds and the counter will this grateful function when three attempts have been made.  You can use clearInterval() to close if the attempt success before the third time.  Details of use are available in Flash diocuments help.

• Firefox has detected that the server redirects the request for this address in a way that will never end.

  This week (01/10/12) I registered on youtube and now I can't log back in here or in my gmail account. I tried every fix-it/single remedy offered the FF forum but nothing works.

  Any other work, all the sites that I frequent load fine, is youtube doing something on purpose for FF users? I can get the page youtube videos and see, but I can't log on, every time I click the sign in button, I get:

  "The page is not redirecting properly".

  Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
  

  This problem can sometimes be caused by disabling or refusing to accept cookies. »

  I hate to be a conspiracy theorist, I can connect to youtube without problem on IE, but I hate this browser. I use windows 7 and 15 FF. Can someone find it?

  Looks like it's a firefox issue, because that never happened on IE, Safari or Opera on me.
  You think not that a simple patch can solve this problem. I have to delete individual cookies every day.

• Add the date and time to the header or footer of page NUMBERS

  I'm designing a spreadsheet for a fundraiser following the suppliers, the delivery of requested supplies and supplies used. Given that it will be shared and continuously updated with other participants, I would like to include the date and the current time into the header or the footer. The time would be important, so everyone is looking at the last impression.

  I use an iMac end of 2015 with El Capitan 10.11.4 and NUMBERS 3.6.1

  Thanks in advance for your help.

  Brudduh,

  I think that you must manually update the time every time in the header or footer options

  Numbers for Mac: using headers and footers for printing - Apple Support

  But it's simple, just go to print spread out and make the changes, then print and distribute your worksheet updated for your fundraising.

  

• How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air &amp; app but still old ID think to update the application

  How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  You must delete and re-download this request.

  (140006)

• Effective rate using ni6143 with the request based on aiex2.cpp method

  Dear engineers experienced,

  I had a problem with the request method based on the file "aiex2.cpp", available on the site by using ni6143. It comes to the actual sampling rate. On the datasheet, it is said that the ni6143 could have the ability to data acquisition with speed of 250 kHz per channel, which means that each data could be acquired in 4th-6 second. So here's my question: if I use all 8 channels (each to 250 kHz), this means that I have to use 8 [channels] * 4th-6 [seconds] = [seconds] to get a data set (one for each channel), 32nd-6 or I can use only 4-6 [seconds] to get? I use the method of application based on aiex2.cpp for the experience of the trial. Inorder to check exactly what is the sampling rate, I/o digital set up a signal in the maximum power before gain on demand and set low during data acquisition is complete. It shows the oscillograph than the actual time for the acquisition of a set of data (one for each channel) when I use 8 channels (each to 250 kHz) is about 32-6 [seconds], which means that the device acquires data by a channel channel, not at the same time. I want to know if there is any setting that I have to settle with the registers, or request method could not acquire data with 8 channels simultaneously. My code is exactly the same with the file "aiex2.cpp".

  Thanks for help.

  Hello Licry,

  Yes, the example only shows how to acquire a number fixed samples.  Among the function calls that implements the acquisition will allow you to make the material constantly acquire...

  aiNumberOfSamples (theSTC, numberOfSamples, kFalse); for finite, false for continuous

  If you can set it to kTrue to acquire continuous.  So that the task to continue to work, your application must be able to access the FIFO data fast enough so that it does not overflow.

  Second, every continuous acquisition must end someday.  When your loop has acquired all data affecting the application, he must issue commands to stop the acquisition.  The manual of the STC in detail the steps that can be taken to stop a continuous acquisition.

  http://www.NI.com/PDF/manuals/340934b.PDF (see section 2.4.3.3)

  Steven T.

• Automatic use at the request of resource blocks using not all solutions available resource locking

  Hello

  I'm trying to use TestStand with batch process model. I run lots of 8 EHR. Most of my tests have dedicated hardware, some use shared resources. As far as I can tell (and according to support NEITHER) the fastest way to run my test is to configure all tests in blocks using Auto demand for resources and just create enough resource Lock Alternatives for EHR 8 to use resources dedicated at the same time.

  If I create a single block of resources at the request of self employment with Alternatives to resource lock 8, it works perfectly. All EHR 8 run the test at the same time. However, if I add a second block of resources at the request of self employment with 8 Lock Alternatives resource (the same as in the first block, or with new unique names named) TestStand uses 4 of 8 Resource Lock Alternatives and my test takes twice as long as it should.

  Is it possible that I miss a setting, or configuration things wrong? I have attached a simple sequence that illustrates what I'm trying to do and a capture screen how TestStand runs it. TestStand 2014.

  Thank you very much for the help!

  Will be

  I can't reproduce your behavior.  I have a quad core with all discussions on "logical".  So a total of 8 wires.  I modified your movie file to do 16 DUT to see if she could slow down.  I see about 7 seconds per report.

  We know that this is not the sequence file, because I run your movie file.  My guess is that there is another setting somewhere.  TestStand or in your operating system that is the cause.

  You have changed the model of batch processing?  I use out of the box one.  What version of TestStand?  I have 2014.  In Options of Station > preferences what is your processor affinity set?  Mine is - 1.

  Kind regards

• Some or all of the requested samples are not yet acquired: API change responsible?

  My Delphi program, which works very well under NOR-DAQmx 8.9.0f4 on a set of material, fails under 9.0.0f2 on what I received insurance material is equivalent. The error is «some or all of the requested samples are not yet acquired...» ». This happens even to slow scanning rates, and coming to suspect that the API has changed subtly in the transition from version 8 to 9. What is the probability is it? Now that I have access to the source code on the new hardware (NI PXI-1044 with computer integrated PXI-8110) is there something I can do to check this?

  Hi Francis,.

  Your program still calls DAQmxCfgDigEdgeStartTrig() for all the tasks of the slave? If you do not do this, the devices are beginning to acquire data at the same time, and since you pass 0 for the timeout parameter to DAQmxReadBinaryI16(), out-of-sync devices could certainly time-out errors.

  In addition, you must ensure you start the slave devices before the master device, so that they're already waiting for a trigger at the start of the master device.

  Brad