time-out for feathering to TPETIME

Similar Questions

• Change the time-out for the vote of the files

  Hey, is there a way to change the default time-out for files with right to vote. The idea: I have a grid storage (soft). Then I configured the external redundancy for my roc diskgroup where is my votingfile.
  
  When one of the stored mirror gets turned off, the system hungs for almost 2 minutes. The deadline to vote is set to 99 seconds, right? This should be the default setting, at least, according to the journal of crs alerts.
  
  Is it possible to change this value?
  
  At present, the database gets shutdown, after which expires the time-out.
  
  Christian

  Hello
  This note will help you with the IO time-out, but I think that's not your problem.

  See:
  Component sync (CSS) of the Oracle Clusterware services maintains two mechanisms of heartbeat heart 1.) the heart rate of the disk on the device with the right to vote and 2.) the heartbeat of the interconnection network which establish and confirm the valid membership of node in the cluster. Both of these mechanisms of heart beat have a timeout associated value. The heartbeat of disc has an interval of time-out of e/s internal (DTO disk time-out), in seconds, to complete an i/o to the drive to vote. The parameter misscount (MC), as noted above, is the maximum time, in seconds, that can not miss a heartbeat of network. The e/s disk heartbeat time-out interval is directly related to the setting of parameter misscount.

  Change the default value of misscount not only affects the delay interval to wait for IO to the drive to vote, but also affect the tolerance of pulses missed through the interconnection network.

  MissCount should NOT be changed to work around the problems mentioned below.
  HBA QLogic cards with a link down Timeout greater than the default misscount.
  Cables wrong with Matrix Storage/SAN this purpose IO latencies
  SAN switch (such as Brocade) failover latency greater than the default misscount
  EMC Clariion array at the intrusion of the AOC for superior to default misscount MS backup
  EMC PowerPath path and to repost IO error detection and redirect than default misscount
  Bad network configuration SAN that creates latencies in the path of the I/O.

  Then I configured the external redundancy for my roc diskgroup where is my votingfile. When one of the stored mirror gets turned off, the system hungs for almost 2 minutes.

  As you use external redundancy Oracle knows not that there is a disk mirrored by behind.
  Perhaps the OS or storage keep I/O when you stop mirroring due to a bad configuration. I think that this problem is related to the OS or storage not the Oracle Clusterware.
  If you perform this test with the diskgroup (external redundancy) storing data will have the same result.

  Kind regards
  Levi Pereira

• Time-out for ARP cache on Cisco routers

  Hello

  I was reading a book on Cisco routers, in which the author said: "the router resets the age ARP meter to zero whenever he sees valid traffic from the corresponding device.» This ensures that the addresses of active devices are never emptied in the cache, regardless of how long they have been known. »

  I'm really surprised at this topic because I always thought the age counter ARP was an absolute of the meter and not compared to the last time a package was seen coming from the corresponding IP address. After reading this, I did a few tests that tend to confirm the age counter ARP is absolute and that he cares not if we have movement active in the corresponding period of INQUIRY or not.

  : Question 1 can someone confirm this please?

  I am unable to find clear statements in the Cisco documentation.

  QUESTION 2: when the router sends a new ARP request?

  For example, when the time-out of the ARP is 4 hours or 240 minutes (default value of Cisco), the router sends an ARP request reaching 239 minutes (1 minute before the expiration time). This value is a fixed (send us a 1 minute before aging ARP request) or is it a relative value (x % of the value of timeout)?
  

  Thanks for your help.

  Sam

  I have some additional information that might help. I found an ad of a Cisco engineer, which gives some information about the behavior of ARP in Cisco IOS. He said clearly (and is an example) that if Cisco receives an ARP to a host request it will use this request to refresh the ARP entry and reset the timer so that the entrance without making its own application ARP. Maybe that's the behavior they were trying to talk in the IOS Cookbook.

  It also speaks to a unicast ARP request 60 seconds before the expiration of the entry so that the entry can be updated. It does not specifically say, but I think that this interval is fixed.

  Here is the link if you want to see the details:

  http://puck.nether.NET/pipermail/Cisco-NSP/2005-February/017400.html

  Regarding the error in the book, I worked as an examiner on a few pounds and can tell you that the authors and reviewers are working hard to do the right thing. But sometimes mistakes are not captured and appear in the publication. With the amount of detail covered in the book some mistakes are bound to crawl through.

  HTH

  Rick

• Change the time-out for ARP cache on vSphere 5.1?

  Hello

  Does anyone know how to change the expiration time of the cache ARP on ESXi hosts? We have a few problems with vMotion and it seems that the default ARP cache is set to 20 minutes while it is set to 5 minutes on our Cisco switches.

  Any ideas where to look?

  The routing table in ESXi with has priority over what you have configured in your trade.

  It wasn't a problem in ESX as the Service Console and vmkernel had their own separate routing table to deal with...

  And I do not think that ICMP will reveal such a question... Ping'in so may seem very well...

  Try to configure your vMotion vmk interface with a different subnet and Im sure its all good...

  / Rubeck

• How to configure agent ODI time-out settings

  Hello

  I load the data with the help of agent Standlaone. As I'm loading huge amount of data after only awhile, my session is changed to session expired.

  When I check the log file Agent time out happened to repository work and master repositories.

  Can Sombody help me if there is any Posibility to change setting of time-out for the ODI agent? Is it an ODI configuration or should check us at the database level?

  Thank you

  You can also try below in the file odiparams

  ODI_ADDITIONAL_JAVA_OPTIONS = - Doracle.odi.jdbc.connection.timeout = 60000

• Reset the time-out without clicks or the keyboard input

  Hey all,.
  SO, I have a RFID reader that triggers events in a film's Director. My timeout is set to 2 minutes, but it is possible for the user to never touch the keyboard or touch screen and always in interaction with the program through the RFID interface. How can I reset the timer of the time-out for the program don't timeout in the middle of the activity of the user. I can't find anything in the documentation that says, although it seems that there should be a property that I could put everything back to 0. Like countDownTime or something like that. Any ideas?
  
  -Bruce

  > it seems there should be some
  > property that I could just reset to 0.

  If you use the ' timeout' Manager (and setting of the)
  timeoutLength), try to reset 'timeoutLapsed' to zero when you need to.

• Why my Apple ID several times to lock out "for security reasons" every day or 2?

  Why my Apple ID several times to lock out "for security reasons" every day or 2? This is getting very frustrating. I had to change my password 5 times in the last week. Anyone have any ideas?

  This means that someone is trying to access your Apple account.

• Please can someone help me for a long time out of the payment itun

  Please can someone help me for a long time out of the payment of itun, I lost my phone.

  This is my information

  ****

  ****

  Thank you

  < personal information under the direction of the host >

  OK so tell me first your reason! It of your personal account, why do you give?

• How to change the settings for time-out HFM in version 9.3.3

  
  Dear experts:

  We wonder how to change the setting of user HFM time-out in HFM 9.3.3 running Apache Web server. I found the discussion for HDM 1.1.2 in this forum, but we have this old version of HFM. Please notify.

  Thank you in advance.

  Hello

  Review of the below mentioned knowledge article.

  Hyperion Financial Management error "Session expired" (Doc ID 1372208.1)

  Hope this helps,

  Thank you

  Charles Babu J

• How to change the settings for time-out HFM

  Hi gurus,
  
  Please help me how to increase the time-out setting waiting for Application HFM (11.1.1.3) running on Windows 2003 SP2.
  
  Thank you
  Shashi

  Here are the steps to change the expiration time of in IIS:
  Go to IIS, in the list of Web sites, select hfm, right-click on it and select Properties, this will bring the virtual directory in view tab, otherwise click on this tab.
  Click the configuration button, and then click the Options tab. Time out of sessions should be displayed within minutes.

  If you prefer to go in the way of the EMP Configurator, the Start button all programs->-> Oracle EPM System-> Oracle Foundation Services select EPM System Configurator.
  Once it works financial management select in the first screen, and then configure the Web server-> Configure IIS for Webapplication of financial management;
  You should see the 1200 seconds Web session timeout, change it according to your needs. Do not too big, you want that users initially.

• Time-out occurred before the event waited for SequenceRunner simple

  I'm unable to these tests. I always get Timeout occurred for my sequence in the testOnLogout test.

  Any ideas?

  Time-out occurred before eventTimeout expected occurred before the EXPECTED event
  Error: Timeout occurred before the EXPECTED event
  at org.flexunit.internals.runners.statements::ExpectAsync/handleAsyncTimeOut() [E:\hudson\job s\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Expe ctAsync.as:319]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at org.flexunit.async::AsyncHandler/handleTimeout() [E:\hudson\jobs\FlexUnit4-Flex4.1\workspa ce\FlexUnit4\src\org\flexunit\async\AsyncHandler.as:169]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()

  package tests.view
  {
  
  Import flexunit.framework.Assert;
  
  Import mx.events.FlexEvent;

  
  Import org.flexunit.async.Async;
  Import org.fluint.sequence.SequenceRunner;
  Import org.fluint.sequence.SequenceSetter;
  Import org.fluint.sequence.SequenceWaiter;
  Import org.fluint.uiImpersonation.UIImpersonator;
  
  view of the import. LoginForm;
  
  public class TestLoginForm
  {
  
  private var view: LoginForm;

  [Before (async, ui)]
  public void setUp(): void
  {
  view = new LoginForm;
  Async.proceedOnEvent (this, opinion, FlexEvent.CREATION_COMPLETE, 600);
  UIImpersonator.addChild (view);
  }
  
  [After (async, ui)]
  public function teardown (): void
  {
  UIImpersonator.removeChild (view);
  view = null;
  }

  
  [Test (async, ui)]
  public function testOnLogout (): void {}
  var passThroughData:Object = new Object();
  
  passThroughData.username = "test";
  passThroughData.password = "test";
  passThroughData.selectedIndex = 0;

  var sequence: SequenceRunner = new SequenceRunner (this);
  sequence.addStep (new SequenceSetter (view.username, {text:passThroughData.username}));}))
  sequence.addStep (new SequenceWaiter (view.username, FlexEvent.VALUE_COMMIT, 400));
  
  sequence.addStep (new SequenceSetter (view.password, {text:passThroughData.password}));}))
  sequence.addStep (new SequenceWaiter (view.password, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceSetter (view.domain, {selectedIndex:passThroughData.selectedIndex}));}))
  sequence.addStep (new SequenceWaiter (view.domain, FlexEvent.VALUE_COMMIT, 400));
  
  view.onLogout ();
  
  sequence.addStep (new SequenceWaiter (view.username, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceWaiter (view.password, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceWaiter (view.domain, FlexEvent.VALUE_COMMIT, 400));
  
  sequence.addAssertHandler (handleOnLogout, passThroughData);
  
  Sequence.Run ();
  }

  
  protected function handleOnLogout (passThroughData:Object): void {}
  Assert.assertEquals)
  View.UserName.Text, passThroughData.UserName,
  View.Password.Text, passThroughData.Password,
  (view.domain.selectedIndex, passThroughData.selectedIndex);
  }
  
  }
  }

  So I take a guess here that you want is the call of onLogout() occur as part of the sequence. But it's not what your code. Sequences are defined, then run when you call the run() method.

  Here you call the method onLogout in the middle of set the sequence... then some time later (probably after the disconnection is made) your sequence starts waiting for things happen... and to expire because nothing happens.

  I think that what you want here is to use the SequenceCaller class to actually perform the onLogout as part of the sequence.

  Mike

• Why my network time-out when you try to download the update for ipod?

  I keep trying to download Ipod software version 5.0.1 which takes about 2 hours, but after an hour or two, says network error message has expired. I checked all the settings that I found but nothing helped.

  Hello

  I removed the suggestion of Brian Tillman on the accounting in the Forum Feedback since I went ahead and moved this thread in a forum more appropriate responses.

  However, I still agree with his second suggestion to ask in the forums of Apple. As you mention that this problem occurs by updating your iPod, I think there must be a problem with her or with iTunes which is at the origin of the network to time out.

• Help: How do reset you default values for the session and the time-out at the admin level

  Hello
  
  The DBA was trying to save the settings of time-out value by following the instructions and it kept him setting a default off 28800 timeout of Session Timeout and Idle of 3600.
  
  He saved the value 1, and now we cannot get to change.
  
  How do reset you the default preferences?

  Bill,

  Sorry, I missed your point. To undo this damage, try this:

  Connect as SYS

  ALTER session set current_schema = apex_030200
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_IDLE_SEC', p_preference_value-online 3600)
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_LENGTH_SEC', p_preference_value-online 28800)
  /
  Commit
  /

  Adjust 3600 and 28800 as you like.

  Scott

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• Stor.E ALU 2s no time-out

  Hello
  I have several Toshiba USB hard drives, that I use as storage media with a cable TV box.
  Type DTP110 turns off after a few minutes if you do not use.
  Type Stor.E ALU 2s continues to operate. There is no point when not in use.
  Desturbing more however is the squeaking noise when the box is turned off, which cuts the power of the forced HD.
  I sent a request for Toshiba if there is a tool to set the time-out, no response.
  Anyone know a solution?

  See you soon,.
  kyriako.

  Hello

  I don't have a solution for you, but I may be able to enlighten us.
  It is likely that the hard drive does not meet the host power management controls.
  I don't think it's possible to solve by any other piece of software, unless it's an update of the firmware.
  If you want you can chech in running a modern Linux host and attaching this player.
  Run the drives under Gnome application and try to read the SMART attributes and / or request a counters.

  The results it will show the way.
  Success at the point of Linux to a kind of incompatibility between the HARD drive and your device.
  Same result in Linux shows that the HARD drive does not respond to these common commands and there is not much to do about it.

  Tom br

  Post edited by: MannerhagenVPO