Time synchronization between applications
I'm converting several applications that uses the old driver nidaq to NIDAQmx 9.7.0 using the ANSI C interface for a pxi-6602.
Request #1 creates a pulse of 1 second on Ctr0 to synchronize the calendar with an external device;
DAQmxCreateCOPulseChanTime (counterTaskHandle, "Dev1/ctr0", "", DAQmx_Val_Seconds, DAQmx_Val_Low, 0.9, 0.9, 0.1);
DAQmxCfgImplicitTiming (counterTaskHandle, DAQmx_Val_ContSamps, 0);
DAQmxStartTask (counterTaskHandle);
It works very well. But I also have another application that also needs to be synchronized out of this pulse even. To do this, it tries to read the number of cycles of the timer to determine how long delay for synchronization with application #1. The two problems I encounter are:
(1) when I try to access the application Ctr0 #2, I get the error-50103 code that is reserved for the specified resource.
(2) I don't see a function that can return the count of time or tick since the last pulse anyway. The old code that I used GPCTR_Watch to get this value update, but I do not see a replacement.
I guess that at least the first problem is not entirely unexpected, but I need to find something that can replace this feature.
Thank you
-Sean
Well for what it's worth DAQmxGetCICount works on my X series card (i.e. it returns the current value of the register count that you hoped it would be). What you see, is maybe a hardware limitation of the TIO (660 x) devices.
However, I think that something like this should do what you ask (unfortunately I can't check on real hardware):
//initializationDAQmxCreateCICountEdgesChan(counterTask, "Dev1/ctr4", "", DAQmx_Val_Rising, 0, DAQmx_Val_CountUp);DAQmxSetCICountEdgesTerm(counterTask, "", "/Dev1/80MHzTimebase"); DAQmxSetCICountEdgesCountResetEnable(counterTask, "", TRUE);DAQmxSetCICountEdgesCountResetResetCount(counterTask, "", 0);DAQmxSetCICountEdgesCountResetTerm(counterTask, "", "/Dev1/PFI36"); DAQmxStartTask(counterTask);//call this to get the time (in timebase ticks) relative to the last rising edge of the clock DAQmxReadCounterU32(counterTask, DAQmx_Val_Auto, 0, data, sizeof(data)/sizeof(uInt32), &sampsPerChanRead, NULL);
According to my device is simulated in any case, it seems that TIO devices should now take in charge the County reset feature (not sure what version of driver, when DAQmx first added the feature it was for the X series only).
Best regards
Tags: NI Hardware
Similar Questions
-
Hello.
I deploy my network Cisco Management Center (for VMWare, v. 6.0.0) FirePOWER and tie SFR-module of Cisco ASA 5512. After you apply time in CMF settings, I have a synchronization errors for my module SFR ("TimeFor 172.16.x.x synchronization state is out-of-sync").
This article presents a framework that allow the synchronization time SFR-module with CMF. But I don't have an option to set the time on managed devices, just for the CMF.
Please, tell me how I can solve this problem. Thank you!
I just went through this with TAC. They pointed out that the documentation states that you should not synchronize SFR with a virtual CMF. I found myself defining the CMF and SFR as you pull my domain controller, and everything was fine.
-
Impossible to disable the time synchronization in VMWare Workstation 8.0.1
I read 1189 KB # as well as various articles on disabling time synchronization between host and guest, but I can't seem to stop synchronization.
I closed the comments and edited the VMX file as follows:
tools.syncTime = "FALSE".
Time.Synchronize.continue = "FALSE".
Time.Synchronize.Restore = "FALSE".
Time.Synchronize.Resume.Disk = "FALSE".
Time.Synchronize.Shrink = "FALSE".
Tools.Synchronize.Tools.Startup = "FALSE".But no matter what, the time of comments still synchronizes to the host after turning the power on or return to.
I tried on the hosts Windows 2008 x 86 and Windows 2008 R2 with the same results. I also disabled the functionality of Windows to "synchronize with a time server Internet.
I'm using VMWare Workstation 8.0.1 on Windows 7 Pro x 64.
Clues as to what I'm missing?
Thank you.
Your initial message, I found that something is different with the content of KB.
Will keep you ' tools.synchronize.tools.startup = 'FALSE' but the KB said there should be time.synchronize.tools.startup = 'FALSE'.»
Please copy and paste below your *.vmx file model.
tools.syncTime = "FALSE".
Time.Synchronize.continue = "FALSE".
Time.Synchronize.Restore = "FALSE".
Time.Synchronize.Resume.Disk = "FALSE".
Time.Synchronize.Shrink = "FALSE".
Time.Synchronize.Tools.Startup = "FALSE".
Time.Synchronize.Tools.Enable = "FALSE".
Time.Synchronize.Resume.Host = "FALSE". -
Time synchronization with host ESX to Windows start even if disabled in VMware Tools?
Hello
just got in trouble with a freshly installed Windows XP SP3 VM do not apply Active Directory group policies. After some research, I discovered that this happened only with VMware Tools installed.
With VMware Tools installed, Windows events 1030 and 1097 were generated at each start (the events say that group policy processing has been abandoned and that there is a time difference between the server and the client) and group policies have been applied.
Without VMware tools, everything was fine.
After some additional debugging I discovered that the ESXi (4.1) server was not configured with a valid NTP server and the host time was 10 minutes behind. However, as time synchronization between the guest OS and the ESX host has been disabled in VMware tools, I couldn't imagine it was really the cause of the problem. But strangely it turned out that this was indeed the case! At every Windows startup time has been at the time of the host ESX - but only for a few seconds. This can be seen in the attached photo: initially, there are guest operating system time, and then you see the jump both ESX and then jump back to the guest operating system.
Why does this happen? Hard, I could solve the problem in the first place by configuring the NTP server on the host, I would like to know why VMware tools change the time of the guest OS, even if it is disabled!
Thank you
When he put the VM must draw from somewhere and since the AI network time form more that probably not started it must draw from the host, but once the networking appears he died in the NTP source - that's why it is recommended to configure your ESXi (and ESX) to synchronize the time with NTP source.
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
Calendar application does not correctly synchronize between computers
For several days, my calendar application (part of Mail, calendar & people) was not properly synchronize between computers. If I run the application modern calendar on my Dell laptop to update Pro Windows 8.1, at a meeting of current calendar, it seems that I can make entries but after reboot the same computer or on another computer, the entries are lost.
I thought that the answer might be that I need to uninstall and reinstall the app Mail, calendar & people. But when I do, I meet the download of Windows Store pending problem that never ends and you try to run the troubleshooter Windows Update store still hangs on the re-registration of the Windows store. None of the fixes suggested in the thread on the subject works for me:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/Windows-8-apps-are-pending-and-never-download-from/d859c093-ee94-4581-9bdf-95e35f0c9e0c
I am answering my own question as I've found running a registry cleaner on the affected computer registry errors found especially for Windows Store. After the repair of the registry, Windows Store downloads work properly and I am unable to reinstall the Mail application, calendar, & people and it now correctly syncs between computers. The registry cleaner that I happened to use that figure in the Norton Utilities 16 but I guess any other good registry cleaners might work as well. Utility for troubleshooting Microsoft Windows Update store never work properly and that's it for me. He would always hang on the re-registration of the Windows store.
Microsoft must make its app Store Windows more reliable than to make a crucial Central application for Windows 8 (the application Mail, calendar & people) more robust and more functional. I used the software to Microsoft for more than 32 years, but repeated like this with Windows 8 experiences are very encouraging.
-
What is the relationship of synchronization between the input MUX and the clock to convert DAQmx
My application requires both long settling for the analog input. I can slow down the clock to convert in order to increase the interval without but I would like to learn more about the internal synchronization and synchronization between the switching of input MUX and the clock to convert. Data acquisition is USB-6225.
Thank you
Neville
wet'nwild,
You have reason in the observation that hold all the impulses of the event happening 180ns after convert rising edge clock, regardless of the period of the clock to convert.
This is the process:
1. the clock Convert generates an impulse to start the ADC conversion.
2. a period of time (in your case, 180ns) after the clock pulse to convert, the complete signal hold impulses. This indicates that the data are "required" by the Active Directory Connector. It is now OK for the MUX switch to the next channel. It is important to note that the ADC conversion is not complete when the pulse hold full occurs.
3. at this stage, the MUX will pass and the device will wait for the next clock pulse to convert for the start of the next conversion.
In summary, this means that when you change the period to convert clock signal, the complete signal hold flashed always the same fixed amount of time after the edge of signal clock convert. The complete signal Hold'em is not a good indicator of break-in; the width of the period to convert clock must be waiting time indicator (which looks you determined you're previous posts). A good application for the signal keep complete would be for an application where there is an external multiplexer and the multiplexer needs a signal indicating that it is OK to switch the inputs.
I hope that helps clear up any uncertainty that you have about how it works!
Kind regards
Aaron
-
Apple Notes or reminders of synchronization between the iPhone and Apple Watch
Notes and reminders of synchronization between Apple devices?
Hello
Notes does not synchronize with Apple Watch.
There are currently no separate recalls on Apple Watch application, but still, your watch can be used to manage reminders in the reminders on your iPhone app (or other device from Apple that is connected to reminders with your Apple ID):
- Create new reminders using Siri:
- For example: Hey Siri, remind me < when > < what >
- Meet reminders with Snooze, finished or do disappear.
More information:
https://help.Apple.com/watch/#/apdb6d659efa
Recently, Apple announced that watch OS 3 - a software update for all models of watch, which is scheduled for release this fall / fall - will include a built-in version of the reminders for Apple Watch app.
- Create new reminders using Siri:
-
1-2 second ago stops whenever I try to open an application or switching between applications. The animation of the application icon in the status bar at the opening of the starts, pauses for 1-2 seconds and ends before you open the application. When you click on an inactive application window it pauses for 1 to 2 seconds before making the active window. This only happens after a reboot. It takes about a day being initialized for this problem to occur.
This does not seem like behaviour expected of such a new machine with charge card. All advice is appreciated.
Here is my EtreCheck report:
***
EtreCheck version: 2.9 (250)
Report generated 2016-02-03 11:33:10
Download EtreCheck from http://etrecheck.com
Running time 01:31
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click on the link [check files] help with unknown files.
Problem: Computer is too slow
Description:
1-2 second ago stops whenever I try to open an application or switching between applications.
iMac (retina 5K, 27 inches, end of 2015)
[Data sheet] - [User Guide] - [Warranty & Service]
iMac - model: iMac17, 1
1 4 GHz Intel Core i7 CPU: 4 strands
32 GB of expandable RAM - [Instructions]
BANK 0/DIMM0
8 GB DDR3-1867 MHz ok
0/DIMM1 BANK
8 GB DDR3-1867 MHz ok
BANK 1/DIMM0
8 GB DDR3-1867 MHz ok
BANK 1/DIMM1
8 GB DDR3-1867 MHz ok
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: unknown
AMD Radeon R9 M395X - VRAM: 4096 MB
iMac 5120 x 2880
OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day
SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB iMac (disk1) /: 999,33 (Go 652,85 free)
Storage of carrots: disk0s2 999.70 GB Online
Broadcom Corp. Bluetooth USB host controller.
Apple Inc. FaceTime HD camera (built-in)
Western Digital my passport 071D 1 TB
EFI (disk2s1)
: 210 MB Boot OS X (disk2s3)
: 134 MB Backup local (DIS3) Volumes/iMac/iMac local backup: 999,51 (Go 107,33 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk2s2 999.83 Go online
Apple Inc. IPhone.
Reader SuperDrive for MacBook Air Apple Inc..
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/Library/LaunchAgents/com.support.com.PerUser.Nexusd.plist
/Library/LaunchAgents/com.support.com.PerUser.Nexussrvd.plist
2 unknown files found. [Check files]
/ System/Library/Extensions
com [no charge]. Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]
com [no charge]. Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]
com [no charge]. RemoteControl.USBLAN.usbpart (2.0.6) [Support]
/System/Library/Extensions/Belcarra.USBLAN_netpart.kext/contents/plugins
[no charge] com.belcarra.IOKit.netpart.Panther (1.6.1) [Support]
/System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/contents/plugins
[no charge] com.belcarra.IOKit.usbpart.Panther (1.6.1) [Support]
/ System/Library/extensions/remotecontrol. USBLAN_usbpart.kext/contents/plugins
com [no charge]. RemoteControl.USBLAN.panther (1.6.1) [Support]
[loading] 148 tasks Apple
[operation] 88 tasks Apple
[loading] 191 tasks Apple
[operation] 96 tasks Apple
[loading] com.adobe.AAM.Updater - 1.0.plist [Support]
[loading] com.adobe.CS5ServiceManager.plist [Support]
[loading] com.support.com.peruser.Nexusd.plist [Support]
[failure] com.support.com.peruser.Nexussrvd.plist [Support]
[loading] com.adobe.SwitchBoard.plist [Support]
[loading] com.adobe.agsservice.plist [Support]
[loading] com.adobe.fpsaud.plist [Support]
[operation] com.backblaze.bzserv.plist [Support]
[loading] com.malwarebytes.MBAMHelperTool.plist [Support]
[loading] com.microsoft.office.licensing.helper.plist [Support]
[operation] com.sonos.SonosLibraryServer.plist [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist [Support]
[failure] com.adobe.ARM. [...]. plist [Support]
com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist
[operation] com.backblaze.bzbmenu.plist [Support]
[failure] com.google.GoogleContactSyncAgent.plist [Support]
[loading] com.google.keystone.agent.plist [Support]
[operation] com.spotify.webhelper.plist [Support]
[loading] com.valvesoftware.steamclean.plist [Support]
[operation] net .infinite - labs.SIMBLEnablerForSandboxedApps.plist [Support]
[operation] ws.agile.1PasswordAgent.plist [Support]
Workflow application (/ Applications/Flux.app)
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Cinch Application (/ Applications/Cinch.app)
Canon IJ Network Scanner Selector2 hidden Application (/ library/printers/Canon/IJScanner/utilities/Canon IJ Network scan Selector2.app)
SizeUp Application (/ Applications/SizeUp.app)
Dropbox application (/ Applications/Dropbox.app)
The messages application (/ Applications/Messages.app)
iTunes application (/ Applications/iTunes.app)
[operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck
[ongoing] com.getdropbox.dropbox.48992
[ongoing] com.irradiatedsoftware.Cinch.151392
[ongoing] com.irradiatedsoftware.SizeUp.12192
[ongoing] jp.co.Canon.bj.scan.network.scannerselector2.90592
jp.co.canon.bj.printer.app.MPNEX213.45792 [loading]
[ongoing] JP.co.Canon.cijscannerregister.14112
[ongoing] org.herf.Flux.49952
AdobeAAMDetect: Version: 1.0.0.0 - 10.6 [Support] SDK AdobeAAMDetect
FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]
QuickTime Plugin: Version: unknown
Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]
Default browser: Version: 601 - SDK 10.11
SharePointBrowserPlugin: Version: 14.5.8 - SDK 10.6 [Support]
Unity Web Player: Version: UnityPlayer version 5.2.0f3 - 10.6 SDK [Support]
Silverlight: Version: 5.1.41105.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: update of Java 7 55 check version
WebEx64: Version: 1.0 - SDK 10.5 [Support]
Web of Google Earth plugin: Version: 7.1 [Support]
1Password
Add to the list of Amazon gift
InvisibleHand
Little time
PIN button
Backblaze backup [Support]
Flash Player [Support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
iMac: disc size: 999,33 GB disc used: 346,49 GB
Destinations:
The iMac HD Gallagher family backup local [Local]
Total size: 999,51 GB
Total number of backups: 82
An older backup: 27/05/15, 12:54 AM
Last backup: 03/02/16, 10:34
Backup disk size: too small
Backup size 999,51 GB< (disk="" used="" 346.49="" gb="" x="">
140% nsurlsessiond (2)
85% launchservicesd
78% photolibraryd
11% cloudphotosd
9% com.apple.photomodel
Top of page process of memory: ⓘ
1.70 GB kernel_task
1.12 GB launchservicesd
1.12 GB cloudd
Softwareupdated 492 MB
Photolibraryd 229 MB
6.39 GB of free RAM
26,00 used GB RAM (18,35 GB being cached)
8 MB Swap used
3 February 2016, 11:31:58 /Library/Logs/DiagnosticReports/launchservicesd_2016-02-03-113158_[redacted].cp u_resource.diag [details]
/ System/Library/CoreServices/launchservicesd
3 February 2016, 11:30:22 ~/Library/Logs/DiagnosticReports/iTunes_2016-02-03-113022_[redacted].crash
com.apple.iTunes - /Applications/iTunes.app/Contents/MacOS/iTunes
3 February 2016, 08:18:45 /Library/Logs/DiagnosticReports/nsurlsessiond_2016-02-03-081845_[redacted].cpu_ resource.diag [details]
/ usr/libexec/nsurlsessiond
1 February 2016, 19:53:04 self-test - spent
Hello Agent37,
What are your settings of Photos? Looks like you have a ton of photos regenerate and transferring to iCloud. I've seen similar reports, but I'm not a heavy user of Photos. I'll see if I can move your question on the forum Photos: Photos for Mac
-
Pass data between applications value reference
The issue is that data application reference value is local to the application instance, or can be transferred between different applications.
I have a main application that acquires the table of 100 MB and I need to use these data in a dll. Obviously, I don't want to send table, reference would be better. Both applications are generated in labview 2011.
The second question is whether reference data value can be converted to a string (type cast or flatten to a string) and back. For example with DAQmx tasks flatten to a string does not work.
Alexander_Sobolev wrote:
It's value application data reference is local to the application instance.
Yes.
or may be transferred between applications.
Laughing out loud
The second question is whether reference data value can be converted to a string (type cast or flatten to a string) and back.
Yes, but only means something in the app instance appeared to reference.
You will want to perhaps give more details on what are your real needs, but keep in mind that play with memory directly in LV is not so simple, as he does all he can to hide these details you.
If you pass a pointer to an array to a DLL, you can configure the DLL for this call. If you want to get an accurate picture of LV in memory address and passing around, this isn't something LV supports and you shouldn't do that because the memory should not be controlled by more than one master at any time in time.
LV has functions of memory allocation and to get the pointer back, but requiring explicit calls.
Anyway, I have no real experience with this. If you want to read materials, there are at least two users here with much more knowledge on the subject and you can go through their messages or search and filter for their post - rolfk and nathand.
-
Synchronization between PCI - 6251 / PCI - 7811R
Hello
I need to synchronize two card PCI, PCI - 6251 / PCI - 7811R. This is my first time with a huge app, and I don't know where I should start.
PCI - 6251 I connected SCXI - 1001, (in chassis: SCXI-1161,-1326,-1327,-1125,-1324) and I'll use it for measurements. Through the PCI - 7811R I want to communicate using the JTAG Protocol, SPI and meaby measure PWM signals. I'm not sure that anything is possible.
Please help me or give me some tips where I can find some examples.
Kind regards
__behemot_
Hi __behemot_,
First synchronization between these two modules can be done thanks to the RTSI, the easiest way bus. The two modules must RTSI connector, so no problem should be there. You can find useful information on the RTSI bus on the following link:
http://zone.NI.com/DevZone/CDA/tut/p/ID/4322
Also search NI example Finder on RTSI, you will find beautiful examples.
Concerning the programming of FPGA section, the following links are of course useful when it comes to digital Communication Interfaces and PWM on FPGA:
http://zone.NI.com/DevZone/CDA/tut/p/ID/5385
http://zone.NI.com/DevZone/CDA/EPD/p/ID/4725
Please also check the NOR example Finder (easier to find in LabVIEW is the Help menu): in search for a selected tab Toolkits and Modules--> FPGA--> series a. here you can find a lot of examples that may be useful to start.
Let us know if you need anything else!
Best regards
David Varga
Technical sales engineer
NIH
-
Questions about the synchronization between output and analog input
Hi all
I now have a simple task which head a signal voltage (from PXI ao0) on a circuit and then your comments a voltage at the terminals of a component, for example, that one of the resistors in the circuit, through ai0 on PXI. So in this case, the synchronization between analog input and analog output must be made to avoid error of phase shift.
I tried to build my VI by learning this example: https://decibel.ni.com/content/docs/DOC-3882
However I have a few questions.
1. I noticed that there is a merged error fed the "start task" sub VI for the analog output. What is the point of fusion to mistake?
2. I enclose my VI (also shown below) for the output voltage. I put my writing of DAQmx Subvi in the while loop so that I can change the voltage while the VI is running.
However, in the example, the author has been reading outside of the loop and before even the start task. What difference will it make?
3. I have also attached my synchronized VI. I always put the wavegeneration and the DAQmxwrite in the loop. A bulging guard error saying about samples is not available and needs to a higher sampling rate or a longer wait time. What causes this?
I appreciate that these problems can be solved. Thanks to you all.
(1) first you need start the task of acquiring, he'll wait for trigger here. And then you start the build task that provides this trigger. If acquisition could trigger and never start.
(3) you must first write something in the buffer (writing DAQmx), then only you can generate it (Daqmx Start).
Check Cont Gen tension Wfm - Int Clk - no Regeneration.vi in the help-> examples for example.
-
Can RuntimeStore store share some objects customed between applications?
Hello
I know that one application, we can use RuntimeStore to share information, including objects customed.
What happens if sharing objects across applicatioins customed?
Here is my scenario:
1. two applications, app1 and app2.
2. start app1. He puts some customed objects in RuntimeStore.
3. run app2. It attempts to retrieve the objects of app1.
I found this app2 cannot convert object type in type customed as defined in app1, but can convert to some standard objects BB, for example the screen.
So is it possible to share objects between applications customed?
You have a library that share the two applications?
If you then set the store TIME object in the library. If you have not then you need create a library and create the class in the library for applications to use.
-
How can I synchronize between a desktop computer and a windows laptop?
I'm able to sync between iPad and my desktop or laptop computer, but how can I synchronize between the office and the Tower?
Hello
This link may help: CC help | Synchronize the application with Cloud Creative settings
Kind regards
Sheena
-
First Pro crashes when switching between applications
Hi all
I edit with Premiere Pro on a Mac Pro running OS X 10.10.2 cylinder (3.5 GHz 6 - Core Intel Xeon E5, 16 GB 1866 MHz DDR3 ECC, over-pants D500 3072 MB), when I connect the images with Excel, I noticed after some time switching between Excel and Premiere Pro or all the other apps, first Pro STILL crashes with the error serious.
Project is very disappointing and frustrating that you need to open the recovery file, creating another file and have to get timecode all over again, lost a lot of time to. Expect First pro to work smoothly on a Mac Pro.
Anyone have a similar experience or know a solution?
Thank you
L
29/03/2015 07:19:23.457 com.apple.xpc.launchd [1]: (com.adobe.AdobePremierePro.66488 [4527]) Service was released due to the signal: Segfault: 11
Here is my complete crash report:
https://www.dropbox.com/s/08igd5s3s6evquv/Adobe%20Premiere%20PRO%20CC.txt?DL=0
Process: Adobe Premiere Pro CC 2014 [4527]
Path: / Applications/Adobe Premiere Pro 2014/Adobe Premiere Pro 2014.app/Contents/MacOS/Adobe first Pro 2014 CC CC CC
ID: com.adobe.AdobePremierePro
Version: 8.2.0 (8.2.0)
Code type: X 86-64 (Native)
Parent process:? [1]
Responsible for: Adobe Premiere Pro CC 2014 [4527]
User ID: 501
Date/time: 07:19:22.403 2015-03-29 + 0100
OS version: Mac OS X 10.10.2 (14-1514)
Report Version: 11
Anonymous UUID: D42F2CB9-98B4-C04E-E594-A17C39AC5324
Sleep/wake UUID: B58E8A4B-751B-4568-925F-D3E9E1130B43
Time since started awake: 13000 seconds
Wake time: 4000 seconds
Crashed thread: 0 dispatch queue: com.apple.main - wire
Exception type: EXC_BAD_ACCESS (SIGSEGV)
Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000000
Hello world
I dug deeper reading crash log, and discovered that the reason of my crash is primarily due to the confusion of audio output my mac has as he move from an internal speaker and speaker output and causes the crash. Since I had bought a DAC (digital-to-analog converter) and set the audio output of the DAC first and have no accidents since then. It will be useful.
L
---
Thread 0 crashed: Dispatch queue: com.apple.main - wire
0 com.adobe.AudioSupport.framework 0x0000000103d7f8d0 ML::Device:GetNumberOfPhysicalChannels(unsigned_int,_bool) + 80
1 com.adobe.AudioSupport.framework 0x0000000103d6adb8 ML::CoreAudioHost:PrivateInitDriver(std::basic_string_
_ __,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&) + 712 2 com.adobe.AudioSupport.framework 0x0000000103d6a18f ML::CoreAudioHost:LoadDriverPrivate(std::basic_string_
_ __,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&,_bool,_bool) + 351 3 com.adobe.AudioSupport.framework 0x0000000103d6dac1 ML::CoreAudioHost:LoadDriver(std::basic_string_
_ __,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&) + 33 4 com.adobe.AudioSupport.framework 0x0000000103d7b348 ML::CoreAudioHost::AddDependancy() + 56
-
I want to know the answer of my this request if I change the time on the virtual machine and time host is different and even there is no configured between the vm and the host time synchronization then I restart the virtual machine and then my vm and time host aligns and why behaves like that and what happens if I want to keep this different time in my virtual machine So how can I do this?
Check out http://kb.vmware.com/kb/1189
Maybe you are looking for
-
World clock is 1 hour ahead of the time zone CLT. Summer time in this area ended May 15. Hope Apple will fix to avoid more confusion in the diaries.
-
Issues of volume after update MM
Someone had a problem with their phone itself out of switching vibrate at full sounds all day?
-
How can I get silverlight to run on vista 64?
I watch netflix on my computer. Netflix is says I need to upgrade my silverlight, but it won't let me upgrade. That is to say that it is not compatible. Operating system does not support the 64-bit version of silverlight.
-
HI: My Office has undergone a lot of overhead sprinklers water damage in my condo fire. I ordered a new power and it fuels the system very well, but I have no video and tried the video card of the computer another and it does not work. I can connect
-
QMap in QSettings record and back to the rear
Hi again. I'm a bit of a desperate situation. I have a card flightList which is QMap< QString, QMap > flightListMap; Now, I need to store this card, then pull it out back when the application opens. I learned that QSettings serves for this purpose. W