Timeline and chapter questions-new user

Similar Questions

• How to remove an admin account and create a new user profile

  Hi, I have been using my 2 in 1 PC since July last year and I'd like you guys to show me the steps on How to remove an admin account and create a new user account.

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you try to delete a local administrator account?
  2. are you able to connect using the Microsoft account?

  Thank you for your query details.

  I also like the fact you want to know how to remove an administrator account and create

  a new user account.

  If you are able to connect on the Microsoft account, I suggest you try the following steps to remove an administrator account.

  a. press Windows + X keys and click on computer management.
  b. click on "local users and groups" and then click on "users".
  c. right-click on the account which you want to remove, and then click 'Remove'.
  d. click 'Yes', if the prompt message.

  To create a new user account, please see this article:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  See also:
  User accounts: FAQ
  http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-8

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Remove the admin and create a new user without disc 10.6.5

  I got a new computer from a friend, family, which has expired.    I did not drive or Admin password, how do I remove the admin wipe and back in mobile by default so I can create a new user

  You will need the original installation provided with computer discs.

  Clean Install of Snow Leopard

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

• Question: New user roles between Versions

  Is there any place besides the Administrator's Guide, where new user roles are listed in the annex.  I would be very happy to see a list of only the new roles available to a major version major version in the notes version or any other documentation.  Is there a way to avoid splashing and comparing list of text to the text list of the entire list of the roles of the Administrator's guide?

  We try to document all the new roles of the user in the Notes of explanation around them.  These items are usually marked with 'Necessary preliminary work' then you can quickly analyze the release notes to find them or search "[]".   PQM is available in point 6.1.1 and it includes a lot of new roles. PQM roles are documented in the Administrator's guide.

  If you want a faster way and more accurate to compare, you can get a quick list of all roles available in just looking at the roles table in the database and that comparing to the previous version.   "Select * from roles.

  Hope this helps

  Kelly

• How to deploy and tips and tricks for new users of Jdevloper

  We currently use forms, but we intend to try new modules in jdeveloper 10. I have a few questions. We have developed an example of emp/dept screen according to the directives of the demo.
  1. can somebody explain the operation of the source/executable... In the forms move us file fmb of client for unix and compile for fmx in my forms_path where my IAS is running.
  2. how to run applications
  3. all the tips and tricks of starting using jdeveloper.
  
  We can only use Jdev10, IE7 is not approved for us.
  
  Thank you
  Lalitha
  
  Published by: Superamina99 on November 14, 2008 14:40

  You should be able to invoke the administration console Web on the same machine where your EAR/WAR file is and look for the local file.

• When I change username it locks the computer and only allows the user who tried to change accounts reconnect?

  I log into my account and then I try to change user... when I do that it goes to the windows screen and says that the computer has been locked by the user only the user or an administrator can unlock the computer. I can connect at that time here only return with this user or log in with an administrator account in which the current user is disconnected and then the new user is connected, but not until the current user is totally connected to the wide.

  Hi Loskee,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I went to set up a new user account, but it deleted my old one with all my files. What can I do?

  I've just set up a new user account for someone else, but now I can access is no longer my own user account that had all of my files, pic, and setting.  How can I get this back account that has all my files on it?

  Initially, you were using the original built-in Administrator account.  When you do this and create a new user, the built in Administrator account becomes hidden (but it's still there).  It seems that you are OK with that, but you want your files transferred to your new user profile.  In this case, you must follow the same procedure as you would if the old profile was corrupted.  To claim that the administrator account has been corrupted, and then follow the steps in the following article:

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• Add a new user has produced two news users.

  I have a problem with Windows Explorer to crash. On one of the posts here, it was mentioned to set up a new user and see if the old user data are the issue. Well, I did and when I did set up the new user, I created, but also an additional user with the same name with a dot + my computer name. This username is not launched signature or it will appear in the screen of the user of the control panel. Just remove the additional user name files in Windows Explorer?

  Hello

  1. is the problem with Windows crashing solved?

  Method 1: Run a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  You can delete the files in the user account and create a new user account after the Virus Scan.

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  I suggest to follow the link below and follow the steps and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  Also, I suggest you to follow the link below and check if it helps.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know if it helps.

• OBIEE, cannot create new users or groups

  Hello

  With the help of OBIEE 11g, everytime I try and create a new user or group in the administration Console, it allows me to type the name and description, but when I click 'Ok' to save, the console heading to an error page that says:

  In Firefox:

  Problem loading page

  Server not found

  Firefox can't find the server at [2002.

  
  

  In IE, it just says: the address is not valid

  The URL is : http://[2002:7001/console/console.portal? SecurityUsersCreateUserPortlet_actionOverride = com/bea/console/stock/security/users/createuser/finishing /

  I checked the logs, but have not seen everything about it.

  Can I change an existing user or group very well.

  I also tried to restart the server, but it always does.

  Any ideas?

  Thank you

  Open the Console - servers--> server - general Admin check the listen address and Machine name how it is configured

  Listen Address says (Weblogic guide):

  IP address or DNS name this server uses to listen for incoming connections.

  The servers are accessible through the following URL:
  Protocol://listen-address:listen - port

  Any channel network that you set up for this server may substitute this listening address.

  If listening address of a server is not defined, guests can reach the server through an IP address of the computer that hosts the server, a DNS name that corresponds to the host or localhost string. The localhost string can be used only for applications for clients running on the same computer as the server.

  If you want to limit the valid addresses for a server instance, specify one of the following:

  • If you provide an IP address, clients can specify the IP address or a DNS name that corresponds to the IP address. Clients that specify an IP address and try to connect via a SSL port must disable host name checking.
  • If you provide a DNS name, customers can specify the DNS name or the corresponding IP address.

  Don't let the address listen not defined on a computer that uses several IP (a multihomed computer) address. On such a computer, the server binds to all available IP addresses.

  Thank you

  Angelique

• Adding a new user - error received

  When I try and add a new user to our account after entering in their Adobe ID email I got the following error: "the e-mail address entered cannot be added as a camera digital edition user for this account. Please choose a different Adobe ID or create a new Adobe ID for the user. "Any ideas on how to fix this?

  This occurs when you try to add an account is already verified to work with DPS. To create an account delegate, you must add an account that has not yet been used for DPS.

  If you have already created fact sheets for the Adobe ID that does not work, create a new account and add it as a delegate account and then use sharing > copy the technique to copy the folios from the old account to the new account delegate. After you have copied folios, delete shared folios, and you're ready.

• Squarespace user. Want more options on my site. Adobe has tutorials on Java Script, HTML, and CSS? [was: new user Question!]

  Hello!

  I am a new user to adobe creative cloud. I'm a Web site manager for pge production broadcast in my school and I use squarespace but I want to upgrade and have more opportunities with my websites. Adobe has tutorials on Java Script, HTML, and CSS?

  Not in the way, I think you mean. There are a number of very generous gurus on this forum that will help hard problem solve you your code, and the best way to learn is always, spoil, figure it out and move on to the next thing. :-)

  Googling a question will generally help to guide you on the right track and you can always visit W3 Schools or Code Academy for free tutorials or check if there is a Free Code Camp in your area. Sources for tutorials or classes are Lynda.com, Noble of officeand the General Assembly.

  Chris

• Can you tell me how I can ask for help with the following question of Indesign: I am a new user of Indesign and creative Member Cloud.  I was using the fall of the window/Pages to the bottom of the window to view my pages alphabetically or by page number

  I am a new user of Indesign and creative Member Cloud.  I was using the fall of the window/Pages to the bottom of the window to view my pages alphabetically or by page number and also to determine whether or not my JPEGs have been sufficiently high resolution of the printer.  I don't know how I did it, but somehow the window has changed so that now, there not alphabetical/digital/hi-res information.  It shows just the pages in a two pages in numerical order.  How to restore the window so that I'll be able to view the information I did previously.

  Your help will be appreciated,

  Don Unwin

  [Personal information]

  All I had to do was to click on the links and information in the drop-down list.

• Question: How to create the new user and schema in 11g?

  Who can give me the answer how to create a new user and a schedule?
  
  I had installed oracle 11g DB and oracle in my OS windows client. I found in the 11g than there is no console management business with the new version. It is no different with oracle 10g. So I don't know how to create this new user.
  
  I had created a new DB instance, but I did not how to create a user on it. Who can give me a helping hand for who? I hope a give oracle experenice expert answers.
  
  Thank you very much!
  
  Published by: user774630 on October 27, 2008 22:01
  
  Published by: user774630 on October 27, 2008 22:09

  Hello
  I'm not sure which option you are talking about? [Do you use the EMCA, http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If this isn't the case, the command line that the other is using DBCA (Database Configuration Wizard). I think you're talking about that. Yes, if the message comes from creating the repository that soon after, you can connect to the EM. You would get the port no port HTTP of EM comes from the $OH/install/portlist.ini file.
  HTH
  Aman...

  Published by: Aman... on October 28, 2008 11:36
  Waived, insertion of link does not work.

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.