Timeline playhead does not move in trim mode

Similar Questions

• Playhead does not move - no error

  Hey guys, I don't really know how to describe this problem but I don't want to give it a try. I work in Flash cs3 using as3. I have a project with 5 scenes and nav button to jump between them. When I test the stage of draft 1-4 play fine however when I get to stage 5 playback head does not move, there's just parked on frame 1 (nav button works, animation does not). When I rearrange the stacking order of my scenes the same problem occurs in a different scene that had previously played fine. This problem only occurs when I test the movie - if I test any scene by himself, he plays very well. I don't get any errors AS that adds to the frustration. Any ideas or suggestions would be greatly appreciated.

  Tim

  There is a limit of 16000 images.  you have well over many frames?

• Mute icon in the center of the screen does not move and does not remove

  Mute icon in centerl of the screen does not move and I can't remove it. It does not seam to meet what I did.

  Try below before he came.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Touchpad on my HP Mini 110-1125NR is locked and the cursor does not move

  I've never locked my computer.  Everything has been implemented in the store where it was purchased about 4 years ago.  I put my computer in sleep mode yesterday afternoon and just tried to use this evening... somehow, the touchpad is inadmissible and the cursor does not move.  He remains in the middle condition of the screen.  I turned off the computer and restarted, nothing done.  Can anyone provide a solution?

  Hello

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  If the pointer is still frozen, try double clicking the top left of the button.

  Kind regards

  DP - K

• NULL does not move with the tracking data

  I created a track in Mocha AE and copied to the Clipboard.
  Then, I created a Null value in AE and pasted the follow-up data on it.

  However, Null value does not move.
  Any ideas?

  PS I have watch it during the follow-up process, and grooving of X, I created did move/track.

  you have a composition of 54 Minutes here. you are going to restore all 54 minutes with the 54 minutes of elements trained using data from mocha in sequels? I guess that the answer is no. first thing you have to do is on the duration of the shot you want to make your composition. so only you take to mocha and follow your footage.

  so in your example, I guess you should take about 30 seconds, or maybe more? Set the workspace accordingly:

  

  then cut the timespan to duration:

  

  then you should have this:

  

  Ahhh MUCH better. only the length you need. now use the rail in Mocha Ae option. in case of mocha, you will again see the duration of your huge video file:

  

  to keep things organized you can zoom timeline in the / points so that you can see just the graven images and will not get confused by 53.5 minutes of video you don't need. Press here:

  

  now, you will see this - just your images carved

  

  track data, export and when you paste data - make sure that you are on the first image.

  

  Good luck!

• I'm doing a gif animated JPEGs, my palette Animation/timeline menu does not show the ability to make images of layers, I slot than extended CS6 64 on windows 10

  I'm doing a gif animated JPEGs, my palette Animation/timeline menu does not show the ability to make images of layers, I slot than extended CS6 64 on windows 10

  Please click the animation button to create the image. This should create the first image in the palettet in mode of image Animation timeline. you not in any mode animation again

  Do you see a button create framework amnation in my screenshot because I clicked on it to create an animatiion framework.

  

• iTunes does not move files to the Recycle Bin

  Today I noticed that when I delete a song in iTunes and select the option "Move to trash", the file does not move in my trash and rest in the iTunes media folder. When I right click on a song in iTunes and select "Show in finder" and delete the song here I am prompted for my password for finder make changes... I suspect that this could be the problem. iTunes cannot go beyond the 'enter password to make changes in the finder' automatically? Help, please! It's pretty frustrating

  Thanks in advance

  RosBufo

  I'm not positive, but it sounds like a permissions issue. Back up your computer then:

  Read the part about changing the permissions on the folder iTunes: https://discussions.apple.com/message/11583914#11583914

  LincDavis June 2015 post on the whole correction of the permissions on the Directory user-

  https://discussions.Apple.com/message/28436841#28436841

• Magic Mouse does not move the cursor

  After I pair my magic mouse, it scrolls and the buttons work, but the cursor does not move. What can I do to restore the mouse entirely, or even remove the name? Or what else should I do to solve the problems.

  What is the new Magic mouse (MM2) you have?

  And you're running with Yosemite, as shown in your profile.

• The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• How to lock my iPhone 6's screen so it does not move between portrait and landscape?

  How to lock my iPhone 6's screen so it does not move between portrait and landscape?

  Select portrait orientation lock.

  Swipe the top of your home screen to access the control center and select the icon with a lock and an arc around him.

• I don't have a navigation bar and firefox does not open in safe mode to return to the default configuration. Does not work reinstall. Any help please.

  I have no navigation bar since I closed it to have more space on the screen. It will not re - open. Firefox does not open in safe mode, but immediately opens in normal mode with the new configuration incorrect, so I can't reset to default configuration. I deleted Firefox and re-installed and it always opens with the same faulty configuration. Why doesn't Firefox give me the safe mode dialog box, why can I not re - open the navigation bar, and how I can do those two things, please? Firefox is currently unusable for me without a navigation bar with no access to the default settings in safe mode. I can't search the extensions that I use since I have no navigation bar to go to tools, modules, Extensions.

  This has happened

  Each time Firefox opened

  I closed the navigation bar to make more space on the screen and I could not re - open.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0)

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• XP does not restart in safe mode or any mode.

  clicked on "Download updates and shutdown". Morning then tried to reboot and XP does not restart in any mode. Continues to rerun initial time and again, go to the 'mode' screen for 25 seconds and then starts again.

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  And then, if your computer is still infested with hijackware, maybe the updates did not cause the problem? =>

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/fa39a531-b865-4de5-a0fd-2ddc075aacff

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp does not boot in any mode

  I still can't find info on windows xp does not start in any mode.  Keep the loop on the screen where it has the Safe Mode, Safe Mode with network, last Configuration know, etc.  Any solution?  I appreciate your time.

  Do you have household XP No Boot Troubleshooting as stated in the post sticky at the top of the forums?

  They were practically useless, I'm happy that they were taking him down.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank:

  My system worked well until: _.

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!