Timer that starts immediately

Similar Questions

• I get "well, that's embarrassing Firefox ishaving trouble recovering your windows and tabs... every time I start worm." 20.0.

  For these past few days, whenever I open Firefox, I get "well, this is awkward!" Firefox has struggle to recover your windows and tabs. I'm on version 20.0 on an IMac with Mountain Lion. I don't want back windows or tabs. I still have to close everything and leave Firefox when I'm done with it.
  If I choose Select 'Close', then I get an empty stage and not my home page. If I 'restore' I get what is listed, but I don't really want to. I want as my home page. Y at - it a fix for this problem?

  A possible cause is that you first close all Firefox Windows and then close the Firefox application.

  Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

  • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• On the right of the adressbox, I always have Yahoo then Google, how can I solve that, I already delete Yahoo from the list in the box search, but every time I start firefox Yahoo is back. Thanks Ron Mijtelen ter, Amsterdam.

  Question
  On the right of the adressbox, I always have Yahoo then Google, how can I solve that, I already delete Yahoo from the list in the box search, but every time I start firefox Yahoo is back. Thanks Ron Mijtelen ter, Amsterdam.

  Hi Ron,

  Have you looked at article in the Knowledge Base using the search in Firefox bar? There are lots of good information in there. You happen to have an installed Yahoo! toolbar? You must disable or delete as well if you do. Try to start Firefox in Mode safe mode by holding down the SHIFT key while starting Firefox. If you have any problems using the safe, it's a matter of add-on or extension.

  Hope this helps!

• Error message occurs every time that I try to start Control Panel

  Hello

  I get the error message "Windows Explorer has stopped working" every time that I try to start Control Panel. He tries to report the problem to microsoft and then restarts. I use vista Home Premium on a Dual core Equium L40-10 x. Please help, I got this laptop only 2 days!

  Help will be very appreciated.

  Thank you
  Ian

  Hello

  It's a weird error message, but you should try the following:

  Recover your machine and see if the error appears again. If Yes, then follow this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  find the nearest servicepartner available in your country and send your machine to them for verification of material.
  Hope that everything would be fine. :)

  Welcome them

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• My PC starts immediately after stopping off for a considerable time

  My new PC will not start immediately after the power supply is cut off for several hours. However, it starts up after several minutes of trying. Is this a problem related to the power supply or other materials? I assembled just this new pc, and before that, it never happened. Here are the specs of my pc:

  GX650 Bronze PSU CoolerMaster; Processor Intel i5 2320; Intel DH67CL mobo. 6750 2 GB DDR3 graphics card Sapphire; 2 x 4 GB Corsair RAM; Kingston 64 GB SSD; WD 1 TB HARD drive; ASUS DVDRW
  My PC is connected to the mains through an inverter 600w APC.
  Is it possible that it could also because of the connection of power supply of the pc case itself? For the record, the case is an old one that has experienced a recent surge that destroyed my previous mobo and basically almost everything in it.

  Hi wannmann

  These forums focus on Microsoft software.

  Your best resource for the problem you describe would be the motherboard support forums. Here is a link for your convenience.

  Support of Intel communities:
  http://communities.Intel.com/Community/Tech

  Concerning

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Windows Update runs every time you start and says that "some updates failed"

  My computer wants to update each time after starting upwards.

  When I let it run at the end of the update that always, I get this:

  "Some updates failed"

  Microsoft. NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server, 2008 x 86 (KB2657424)

  Try to connect to windows update manually, choose the "custom" button

  Let it scan, perform updates.

  Also, the update update update to "Microsoft update".

  It is an upgrade for xp.

• KB2656353 security update has been downloaded every time that I have stop my computer and when I start upward again in recent days.

  This download is there yet.  It seems to be the same, this is the first time that I wrote the code at the end.  I still download, allowing to update at the stop.  It is not usually this many Microsoft Downloads.

  Full text of update: a security update for MS .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353)

  I have also had problems with my computer.  Had a friend for the holidays watch, which quarantined to a single file.  The only thing we could figure out was that my McAfee program was running whenever I clicked or moved in my email accounts and he used all of the memory 2 g.  So I switched browsers Firefox, McAfee was not doing this, then it was fixed.  After about 5 days at home, McAfee was running with Firefox and slow things down.  I have McAfee online and they are gone, removed a bunch of files placed in quarantine and not something in the software.  It helped, but I still have questions that I had before my friend watched during the holiday season.  (If my printer is left on my computer is hampering trying to close or start.)  I never had this problem at the last place I've lived, but also had a direct line to the internet modem, when I am on a wireless adapter.  And I had problems with the computer in my old USB ports corrupt flash drives.  (* sigh * I just turn my printer power on and off when I need and turn off wireless on this subject because of this problem.)

  I also had a warning of 'virtual memory is low' and also known as the end, and it is displayed when the computer is in standby or when I left it for a few minutes.  Again, I have 2G of RAM, but all these strange things began to happen as soon as I started running internet from a wireless key, not that I don't have the choice in my current setting.

  Thanks for your help!

  Angela

  Hello

  I suggest to perform the clean boot and then try to install the updates and check.

  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• Launch of the program in an entire window every time that the computer starts caching

  Problem is that I have the program launch Cache in a full window every time that the computer starts. Stupid! It should start only in the system tray. Imagine every other startup program starts in a full window from the start. Is not acceptable. Also, I had disable the security function in the control panel of Windows 7, which allows the programs to make changes to the computer or leave it in a message box whenever he throws. Fuck that person nothing told me on this software is so much in need. In a chat online SanDisk said it's just the way it was designed.

  You can choose to not launch the application at windows startup ("do not start with windows" option). The caching engine still works without the GUI app.

• How to stop disk check to run every time that windows vista starts?

  How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?

  Hello

  This tells you how to enable and disable it:

  How to difficulty Chkdsk will not run at startup in Vista
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to resolve thei problem the next time it starts. Never does. Tried to uninstall and reinstall but no good.

  I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to solve the problem the next time it starts. Never tried to uninstall and reinstall but no good.

  Sound familiar to anyone?

  Hello

  Please go to the save location of the Lightroom Catalog and here please delete the Lightroom Catalog Previews.lrdata folder.

  Now please open Lightroom and check if it works.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• Speed Grade crashes on start immediately after each time.

  There is not even for a second. no time to start a project or import a film. It crashes without fail after starting upwards. Have not been able to do one thing with this program because it will not stay running.

  All my other programs CS6 run great. First, After Effects, Audition, etc all smoothly.

  Motherboard Asus X 79 Pro

  CPU i7 3930 K

  64 GB of Ram

  GTX 580

  MUSHKIN Chronos Deluxe SSD boot drive

  MUSHKIN Chronos Deluxe SSD for the Disk Cache

  24 TB raid array.

  Windows 7 64 bit

  All my other software Adobe is stable. Don't remember even when the last crash was on a program of CS6 except fo Grade speed which I couldn't use.

  Is there something not compatible on my computer? He just doesn't have accounts for me. The crash is instantaneous at startup. Of course I tried to reinstall

  firmware Central drivers etc. ran updater adobe etc. Tested the Ram for problems that takes a long time to 64 GB.  5 passes all the memory sticks, with a hitch.

  I you send an email.

  _

  Duy Anh

• My Firefox (newest to date), every time when I start it becomes (not responding) above the bar and stands still for about 30-40 seconds, and then it starts, every time - that's why? (C2D t2500 L2 = 2 MB, ram 2 GB, Kaspersky, Win7Ult)

  No Crash at all, but the work too bug and very often goes unresponsive for a while even during countinual usage, and also, when browsing web pages with many images its RAM usage set to 1, 8 G and more (for example. Facebook, big albums) where is the problem with this 2 parts in stock, and what can I do such things for shelves

  For some ideas, see Firefox takes a long time to start and Firefox crashes or does not - how to fix .

  You can also go through troubleshoot and diagnose problems of Firefox, step by step.