timestamp does not match data

Similar Questions

• Getting ORA-01861: literal does not match format string whith 2 passes DATE

  Not exactly a complete Newbie, but not an expert either but it left me speechless...
  
  I have two DATE columns in two different tables.
  In a select statement I compare these two in the where clause.
  
  ... and
  Table1. Column1 = table2.column1
  
  I then get
  
  ORA-01861: literal does not match the format string (and toad has highlighted the second column)
  
  I made a selection on the two tables to have a look at the values and found that, the values in a table (Toad), has this format: YYYYMMDD but in the other select table produces a column of values in the format YYYY-MM-DD
  
  I've made a desc on the two paintings and confirmed that the two are DATE columns...
  
  I've never seen different date formats in the same database... Thinking about it now (I'm home and can not verify) the two tables could be in different schemas... Different schemas can display different date formats?
  
  In any case, I tried to_date ([column] on the two (in the where clause) and got that a nonnumeric value has been found where a numeric value has been planned (this time for the first column).)
  
  So I guess I ask how come two different date formats and how to find the nonnumeric value in table 1 which contains lines of 5.8 million
  
  Any tips/ideas/tips?

  Please check back when you get back to work... I can almost guarantee you that one (if there is not both) of these columns is NOT a data type DATE (or timestamp).

  Or if they are, you are actually handled in a view or query to convert to this type of data.

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• Date does not match the format DD-MON-RR

  I've created a form, and I have an element bound to a date type field.
  This element is a date picker, and when I choose a date on the calendar, the date appears correctly, in article 28-Dic-12
  
  The problem is, trying to create the record, I got an error:
  Date does not match the format DD-MON-RR
  
  But I do not understand how to solve this problem. The date is correct as far as I KNOW.
  
  Kind regards.

  change Application language derived from-> Application primary language

• Size of the hard drive does not match, what to do?

  End of 2012, the MacBook Pro 13 "

  I've added everything I installed and registered on my macbook and it does not match the size of my disk info...
  I just deleted all the documents that I need to see what will happen with the size of the disk and it says: drive for 'other' size is 85GB and

  Audio = 0
  Film = 0
  Photo = 0
  Programs = 0
  Security Copies = 0
  Other = 85,17 GB

  And the strange thing is that I have 10 + adobe programs installed (that doesn't add anywhere near 85 GB!)
  But the weird thing ', it is also that it shows 0GB to programs/software that I obviously have a lot of programs/software installed. WHAAAT...

  It's really annoying

  It seems as if increases the amount of data in 'other' counts for

  Is there someone out there in the world of the internet, who knows how to fix this?

  I tried to read a previous debate about this, but to be honest, I do not understand...
  I'm not exactly a macbook-computer-expert when it comes to knowledge like that

  I would be grateful for your help!

  

  It is in Danish, but... Yes

  LYD Sound/Audio =
  Film = film
  Photo = Photo
  Progr. = Programs
  Sik.Kopier = security Copies
  Agent = other

• When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  Example of

  Stair machine 550 K/CAL

  Apple Watch 30 k/cal

  Hello

  During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

  More information: use of the application of the workout on your Apple Watch - Apple Support

• Elapsed time on graph does not match indicator sound

  Hello

  I created a vi that displays three waveforms on a graph whose axis x shows the time elapsed since the vi was launched. The data is written to an excel spreadsheet. Everything works as expected with the exception that column of time in my file does not match the time that is displayed on the x-axis of my table. The time in my file only shows increments of 0.1 second, with the same sample for every ten samples, so that the time on the graph increases in increments of 0.001 (accuracy I had put in) and is unique for each data point in amplitude. I have attached my output file for reference. The column 'X' is both.

  I am collecting data at 100 Hz and 10 samples of reading both using the continuous sampling mode. Without my loop for the values of x, I get a sample of time on every ten - what I understand why, given my sampling rate; with it, I get this same sample for all ten samples (again, I think I understand why, but foolishly hoped that might solve the problem). What I don't understand is why the time on my table is incrementing differently time data, I wrote to my folder, since both are from the same source. Anyone would be able to help me understand that, if I can try to solve my problem?

  I have also included my vi. I use USB 6229 OEM.

  This is because you write 10 copies of t0 to the worksheet

  Try this little maodification and see if that helps

  

• 0xc0000221 error: Windows Boot Manager is possibly corrupt. The header checksum does not match the checksum calculated.

  Just turned laptop on a message saying... Manager of windows startup, the file is possibly corrupted, his header checksum does not match the sum of computer control. ?? File: / windows/system32/win load.exe...

  status: 0xc0000221.

  What help please this meen?

  Original title: help!

  Hi markwiggins,

  Follow these steps:

  Method 1: Run the Startup Repair

   

  For instructions, see the following article:

   

  Startup Repair: frequently asked questions

  If the startup repair does not resolve the problem, follow all the methods of these items:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  Method 2:

  Restore the system in the advanced system to a restore point recovery options menu before the show.

  For more details, see the following article:

  What are the system recovery options in Windows Vista?

  Method 3:

  Use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

   

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

• error indicates "file is possibly corrupted. The checksum does not match the checksum calculated.

  Hello world

  I use Vista Home Basic, SP2. Windows takes a lot of time in the judgment and often fails to do this completely. Windows after logout again a soft purr at the disk continues. Windows fails to start quickly. After several reboot it starts and sometimes even refuse except CD assisted.

  In order to repair boot directly from CD is not possible either. Jump the trunk and windows from the Windows CD start loading.

  Error, States "Checksum error. The file is possibly corrupted. The checksum does not match the checksum calculated'.

  Do I have to reinstall windows or any help please.

  Jean-Philippe

  Hello

  I suggest you to follow the methods and check.

  I suggest you perform a check disk in Windows Recovery Options.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Warning of Chkdsk.

  Important: If all data on the hard disk may be lost when running chkdsk, as the chkdsk attempts to repair that affected sector.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

• APEX 4.2 error said... does not match the YYYYMMDDHH24MI YYYYMMDDHH24MI format.

  
  I'm new to APEX, but I will try to provide as much detail as I can so that someone can help me in fact.

  Relevant elements

  P2_START_DATE

  P2_TERMSTART

  I have the Source for P2_TERMSTART value to select to_char (sysdate, 'YYYYMMDDHH24MI') of double

  

  I have the settings of P2_START_DATE defined as pictured below

  

  When I try to run the page I get the following error.

  Contact your administrator for the application. Between Minimum Date attribute & P2_TERMSTART for the P2_START_DATE element does not match the YYYYMMDDHH24MI format YYYYMMDDHH24MI.

  I do not understand the error, as it appears that the fields match

  Change & P2_TERMSTART to & P2_TERMSTART. You are missing the point.

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• The column that does not match when comparing two records

  Hi all

  We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:

  Table 1

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	oraPR2
  3	C	C1	P3	SRP

  Table 2

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	PR2
  3	C	C1	P3	PR4

  In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:

  PK	Column_Mismatch
  3	Property2 (this must be the name of the column that does not match)

  Appreciate the help.

  Thank you

  Andy

  Hi, Andy.

  Andy1484 wrote:

  Hi all

  We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:

  Table 1

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	oraPR2
  3	C	C1	P3	PR3

  Table 2

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	PR2
  3	C	C1	P3	PR4

  In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:

  PK	Column_Mismatch
  3	Property2 (this must be the name of the column that does not match)

  Appreciate the help.

  Thank you

  Andy

  Why you don't want no matter what exit for pk = 2?  Property2 does not correspond either to pk.

  What happens if the 2 columns (or more) do not match?  The following query would produce a list delimited, such as ' parents; PROPERTY2 '.

  WITH got_mismatch AS

  (

  SELECT pk

  , CASE WHEN t1.parent <> t2.parent THEN '; PARENT' END

  || CASE WHEN t1.child <> t2.child THEN '; CHILD ' END

  || CASE WHEN t1.properry1 <> t2.property1 THEN '; PROPERTY1 ' END

  || CASE WHEN t1.properry2 <> t2.property2 THEN '; PROPERTY2 ' END

  AS the offset

  FROM table_1 t1

  JOIN table_2 t2 ON t2.pk = t1.pk

  )

  SELECT pk

  , SUBSTR (incompatibility, 3) AS column_mismatch

  OF got_mismatch

  WHERE mismatch IS NOT NULL

  ;

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  The query above does not count NULL values as inadequate.  If you want that, the same basic approach will work, but you can use DECODE instead of <> to compare columns.

  What happens if a pk exist in a table, but not the other?  You want an outer join, where I used an inner join above.

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.

• ORA-19007 - schema does not match

  On my database, we have two matching schemas tables in each - one for the active data and the other for data which stands for research in the long term. Both contain a pattern registered XMLType column. However, when I try to insert directly from the assets in the archive, I get the following:
  
  SQL > insert into eci_archv_schema.rev_item_earn_dtl_archv
  2 Select * from eci_schema.rev_item_earn_dtl
  3 where ROWNUM = 1;
  insert into eci_archv_schema.rev_item_earn_dtl_archv
  *
  ERROR on line 1:
  ORA-19007: http://xmlns.foo.com/1.3.1/ABC.xsd Schema does not match http://xmlns.foo.com/1.3.1/ABC.xsd expected.
  
  The only way in which I can properly move the data from one to the other is to wrap select it from one of the following:
  
  1 XMLType.createXML (my_xml_column.getCLOBVal ())
  2 XMLType.createNonSchemaBasedXML (my_xml_column)
  
  These two taking unusually long to complete and cause my check-in process is very, very slow. Apparently because the patterns were recorded under different database diagrams, they are somehow regarded as incompatible. This is the case or not they actually fit in another way? Is there an easy way to compare?
  
  FYI: we are 11.2.0.3, but this also happens on 11.2.0.2. Any help would be appreciated.

  What specific information would be useful: the XSD who sign us up?

  Yes, including the one you're importing (if not too big) or a simplified version if possible?

  BTW, it's binary storage object-relational or XML?

• Error message - the value entered does not match the Format of the field

  I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

  I have JF13 scheduled as follows:

  Calculate tab:

  If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

  It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

  FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

  I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

  Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

  I'm not very proficient with javascript, any help would be appreciated!

  Just include the two quotes, not the comment brackets.