Tip addresses + idea

Similar Questions

• Use of the USB to Ethernet adapter to find cRIO Systems

  Hi all

  I'm trying to connect to one OR cRIO-9066 to my laptop using USB-to-Ethernet adapter.  But I have a problem with it; Find VI systems shows no results unlike the direct connection via the ethernet port on the laptop.  I wish that the connection of the USB-to-Ethernet adapter to support this feature as well.  I would like to know if somebody did, and I hope a solution to this.

  Here's my setup. I bought the adapter USB-to-Ethernet of RadioShack. I connect the adapter to a USB port on my laptop. The adapter is the female Ethernet port on the other end. I directly connect cRIO and the adapter using a crossover ethernet cable. What is of note is that ethernet connection works.  I can specify the IP address of the cRIO then I can communicate with crio in the same configuration. However, finding systems VI cannot find any system.  LabVIEW 2015, is what I use.

  Instead of using the adapter, if I use a direct connection via the ethernet port on the laptop, find systems VI works fine.

  Any help or suggestion is appreciated.

  Thank you in advance.

  After all, my conclusion to this problem has been the model of Ethernet USB card I was using was not good.

  Gigaware USB to adapter Ethernet (from Radio Shack) was working not with find systems VI on my environment even though it is still able to connect to CRIO if I know the IP address. I even had the other, but the result was the same.  The solution for me was to use another model of the BADGE, which is NS-PU98505. It is cheaper, but has worked with find systems VI.

  I don't know what's behind the different behaviour, but the issue is resolved on my end for now.

  Thank you all for all the tips and ideas. Congratulations to all!

• Unable to deploy SOA of JDEV in WLS running on the virtual machine

  Environment: JDeveloper 11.1.1.7, WLS 10.3.6 running on GNU / Linux virtual Oracle. I have 1 admin server and 2 managed servers running on SOA and BPM.
  
  I have a very simple Hello BPEL as SOA application trying to deploy JDEV in my WLS server.
  
  I was able to successfully create the connection to the Application Server and tested, all hunky dory.
  
  When you try to deploy the process BPEL of JDEV, at the 4th level in the Deployment Wizard (where it shows 'SOA Server', 'Partition', 'Status' and "Server URL"), the URL of the server is still showing 'http://[2606:b400:2010:4047:216:3eff:fe52:52bd]:8001', very wired.
  
  And newspapers showing as:
  --------------------------------------------------------------------------
  [10: 00:43] preparing to send the HTTP request for the deployment
  [10: 00:43] Creation of HTTP connection to the host: [2606:b400:2010:4047:216:3eff:fe52:52bd], port: 8001
  [10: 00:43] sending internal deployment descriptor
  [10: 00:43] send (archive) - sca_One_rev1.0.jar
  [10: 00:44] HTTP to the server, the response code = 502 response was received
  [10: 00:44] problem in sending HTTP request on the server. Please make sure that the server is in place or check the code of standard HTTP response for 502
  [10: 00:44] error in deployment of archives sca_One_rev1.0.jar to partition 'default' server soa_server1 [http://[2606:b400:2010:4047:216:3eff:fe52:52bd]:8001]
  [10: 00:44] HTTP error Code returned [502]
  [10: 00:44] no error message is returned by the server.
  [10: 00:44] error in deployment of archives sca_One_rev1.0.jar to partition 'default' server soa_server1 [http://[2606:b400:2010:4047:216:3eff:fe52:52bd]:8001]
  [10: 00:44] # incomplete deployment. ####
  [10: 00:44] error deployment archive file:/scratch/dghosh/jdeveloper/mywork/BPELProject-Two/One/deploy/sca_One_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  ---------------------------------------------------------------------------
  
  I have searched the forums and couldn't find a useful solution. Some of the mentioned son, this could the problem of DHCP etc.
  
  Can someone please shed some light, thanks in advance.

  Hello

  Go to the administration Console. Environment > servers, see you in the column 'Machine' for your soa_server?

  Go to the environment > Machines, choose the machine that you saw in the previous step.

  Go to Configuration > Node Manager, see you in listening address? May this is the place to be changed.

  Let me know how you go. If this answer is useful, please he reward accordingly.

  See you soon,.
  Vlad

  Give points - it's good etiquette to reward an answering machine (5 - useful; 10 - correct) points for their position if they answer your question. If you think it's useful, please consider giving points

• Not able to deploy soa composite of Jdeveloper

  Hello
  
  I use version version 11.1.1.3 Jdeveloper. I installed Jdevloper and Weblogic server in the same system. Whenever I try to deploy the project in Jdeveloper, I get the following error:
  
  [18: 40:10] problem in sending HTTP request on the server. Check the standard HTTP response code for 504
  [18: 40:10] error in deployment of archives sca_BusinessRulesProj_rev1.0.jar to partition 'default' server soa_server1 [PC161590.cts.com:8001]
  [18: 40:10] HTTP error Code returned [504]
  [18: 40:10] no error message is returned by the server.
  [18: 40:10] error in deployment of archives sca_BusinessRulesProj_rev1.0.jar to partition 'default' server soa_server1 [PC161590.cts.com:8001]
  [18: 40:11] # incomplete deployment. ####
  [18: 40:11] error deployment archive file:/C:/JDeveloper/mywork/BusinessRules/BusinessRulesProj/deploy/sca_BusinessRulesProj_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  Can someone help me pls in this issue? I put the AddressLabel as the IP address of the machine in the console WLS for Admin Server and SOA managed server, I also checked the Proxy in Jdeveloper settings checked. but again, I'm not able to deploy the project. Any help appreciated.
  
  Thank you
  Arun.

  have you managed to compile composite successfully? If it is successful, while deploying them in JDeveloper; Make sure that you have checked the box 'replace '. There are possibilities that the 1.0 version is already deployed and you try to deploy again with the same version without checking the replacement option. In addition, you can try is, deploy the SAR file from the EM console.

  Hope this helps
  N

• Error during deployment - SOA Suite 11.1.1.4.0

  Hello
  
  When I try to deploy the bpel flow in the Suite of SOA 11.1.1.4.0 I get the below error:
  
  Deploy the bpel flow and works very well in the of SOA Suite 11.1.1.3.0_ (Jdeveloper 11.1.1.3.0)
  
  #; There was an error deployment of the composite on AdminServer: deployment failed: error occurred during deployment of the component: CllReceiveEmployeeFromPSFTEBS to service engine: implementation.bpel, for composites: cll_ReceiveEmployeeFromPSFT: ORABPEL-05250
  #;
  #; Suitcase BPEL deployment by mistake.
  #; mistake so they tried to deploy the BPEL component file ' / vol02/appsoa/product/11.1.0/user_projects/domains/base_domain/servers/AdminServer/dc/soa_5d9300f2-10a2-4784-8865-83f7159ee9ce '; the reported exception is: java.lang.Exception: failed to compile BPEL 1.1
  #;
  #; This error was an exception thrown by the underlying deployment module.
  #; Check the trace for the exception in the log (the connection value level debug mode).
  #;.
  
  [16: 07:33] check the log of the server for more details.
  [16: 07:33] error in deployment archive sca_CllReceiveEmployeeFromPSFT_rev1_0.jar to 'ebs_psft' on server [brdell21.br.oracle.com:7001] AdminServer partition
  [16: 07:33] # incomplete deployment. ####
  [16: 07:33] error deployment archive file:/C:/jdev11g/mywork/EBS-PSFT/CllReceiveEmployeeFromPSFT/deploy/sca_CllReceiveEmployeeFromPSFT_rev1_0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  
  Kind regards
  Marcos Allonso

  Is there a jar that you use in your composite? Add this jar in the classpath of the server. And to the above address.

  It is recommended to use the same version of Jdeveloper from Soa Suite.

• PC build issues - first - AE - Dynamic Link - 5 d

  Dear Adobe community,

  -HI-

  I found this a time ideal for introducing me to this community already with a number of Questions:

  I am currently trying to get a PC built for my - just arrived - CS5 MC.

  Since I am originally a passionate editor and AE enthusiast, having worked for Studios where I never had to worry about hardware problems,

  I am not well versed with the material.

  Now I am decided to leave offices and try it on mine. (with the help of some great people)... exciting times
  -image-videos, music videos, commercials and sport-clips, etc.

  Looking through this Forum and read carefully all items (thank you all, especially bad!) and discussions, I still have a few open questions, I want to address:

  My Budget is about €3000 (Yes, all the prices that I know are in €, sorry.)

  The first few future projects will be shot with a canon 5 D M2

  Max length: 3-12 Minutes

  Max V tracks: first: 5 (atm, perhaps more future projects)
  Max AE layers: a lot

  possibly using dynamic links in the first lot.

  outputs: Blu - Ray, web, DVD, flash

  So what I currently intend:

  1.) CPU: i7 950, 3, 06 GHz quad €294

  2.) MB: Gigabyte GA-X58A-UD3R (Rev. 1.0) €206

  2.) are there better alternatives / cheaper?

  3.) CPU Cooler: SCYTHE kabuto 120 x 120, €45
  , 3.) bad idea? any other suggestions?

  4.) 12 GB of RAM: Corsair Dominator 6x2Go €340
  4.) is sufficient to start and perhaps upgrade later or should I go for 24 immediately where AE can be hungrier?

  5.) GPU: PNY Quadro 4000 / evga GTX 480 superclocked / evga GTX €470 930 --272€ € 565

  The 4000 is officially supported and expensive like nothing else, also read somewhere in this Forum that there is no advantage there is more-->

  The GTX 480 seems to get the best results PPBM (with the 'hack'? with the latest CS5?) and is almost half the price

  so I could save money for RAID or a Vespa

  The 470 is listed as certified, much less expensive, but it will slow down my workflow compared to the above 2?

  5.) open to any input on the matter!

  BD - R 6.) SATA PLEXTOR PX-BD940SA 230

  + a DVD-ROM

  I heard about LG is not not very reliable and the Plextor seems a good alternative.

  7.) POWER SUPPLY: CORSAIR TX 950W - €141

  8.) RAID RAID or not? and a more?
  

  I have read and tried to understand everything that has been said on this subject and I am always powerless.

  My intention is to get a

  C: 300 GB Velociraptor for Windows 7 Professional and a

  D: 1 TB Barracuda for images/pictures, sounds etc (+ perhaps project files?) (<-taken from my current computer = €0)

  I have a 500 GB LACIE for my private affairs and a 1 to LACIE for backups and Archives.

  with the CoolerMaster HAF - X 6 x 3.5 "Slots so I if I'm not mistaken, I have 4 locations for:

  4 single Discs / 2 x 2discs RAID0 / 1 x RAID5 4discs
  It will be fairly simple to start with discs for the different scratch disks and opt for a RAID later

  or are there any suggestions for a good and affordable RAID configuration.

  Sorry to bother with this old question, but I couldn't get specific information, I really understood from reading who revolves around this topic, especially for my current needs / specifications of the project.

  So:

  I look forward to the comments and suggestions and I am grateful for any tips and ideas.

  Thanks and greetings of the Austria

  Felix

  Hello

  Felix

  also conider the ASUS motherboards

  Take a look at this review.

  http://BenchmarkReviews.com/index.php?option=com_content&task=view&ID=458&Itemid=69

  Baz

• Diagram of construction problem jdeveloper

  I am invoking a web service via a link partner. But when I click the button rrefresh in tab, its shows to structure this error:
  
  Referencia declared: "urn: unApTypes:TApFieldType".
  oracle.tip.tools.ide.common.xsdgrammar.SchemaGrammarException: Referencia declared: "urn: unApTypes:TApFieldType".
  at oracle.tip.tools.ide.common.xsdgrammar.SchemaGrammarProvider.buildSchemas(SchemaGrammarProvider.java:202)
  at oracle.tip.tools.ide.common.xsdgrammar.GrammarInfo.getGrammars(GrammarInfo.java:860)
  at oracle.tip.tools.ide.common.xsdgrammar.GrammarInfo.createGrammarInfo(GrammarInfo.java:803)
  to oracle.tip.tools.ide.common.xsdgrammar.GrammarInfo. < init > (GrammarInfo.java:282)
  at oracle.tip.tools.ide.common.bpeldesigner.SchemaResolvedObj.buildResolvedDocument(SchemaResolvedObj.java:242)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.ExplorerTreeUtil.populateMessagePartItem(ExplorerTreeUtil.java:208)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.ExplorerTreeUtil.populateMessageParts(ExplorerTreeUtil.java:135)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.ExplorerTreeUtil.populateMessage(ExplorerTreeUtil.java:98)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.ExplorerTreeUtil.buildOperationNode(ExplorerTreeUtil.java:80)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.PLExplorerTreeNode.populateOperations(PLExplorerTreeNode.java:178)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.PLExplorerTreeNode.populateRoles(PLExplorerTreeNode.java:161)
  at oracle.tip.tools.ide.pm.bpelgraph.editors.PLExplorerTreeNode.getChildNodes(PLExplorerTreeNode.java:80)
  to oracle.tip.tools.ide.pm.bpelgraph.editors.ExplorerTree$ TreeExpansionHandler$ 1.run(ExplorerTree.java:6260)
  
  The WSDL file that I invokin is:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < definitions xmlns = "http://schemas.xmlsoap.org/wsdl/".
  xmlns: XS = "http://www.w3.org/2001/XMLSchema".
  name = "IApWebServicesservice" targetNamespace = "http://tempuri.org/".
  xmlns:TNS = "http://tempuri.org/".
  xmlns:SOAP = "http://schemas.xmlsoap.org/wsdl/soap/".
  xmlns:soapenc = "http://schemas.xmlsoap.org/soap/encoding/".
  xmlns:MIME = "http://schemas.xmlsoap.org/wsdl/mime/"
  xmlns:ns1 = "urn: unApTypes" xmlns:ns2 = "urn: unApWebServicesInterface".
  xmlns:NS3 = "http://www.borland.com/namespaces/Types" >
  < types >
  < xs: Schema targetNamespace = "urn: unApTypes" xmlns = "urn: unApTypes" >
  < xs:simpleType name = "TApLanguages" >
  < xs:restriction base = "XS: String" >
  < xs:enumeration value = "alPortuguese" / >
  < xs:enumeration value = "alEnglish" / >
  < xs:enumeration value = "alSpanish" / >
  < xs:enumeration value = "alPortuguesePT" / >
  < xs:enumeration value = "alDeutsch" / >
  < xs:enumeration value = "have" / >
  < xs:enumeration value = "alFrench" / >
  < xs:enumeration value = "alRussian" / >
  < / xs:restriction >
  < / xs:simpleType >
  < xs:simpleType name = "TApFieldType" >
  < xs:restriction base = "XS: String" >
  < xs:enumeration value = "aftNotDefined" / >
  < xs:enumeration value = "aftIntAutoInc" / >
  < xs:enumeration value = "aftIntAuto" / >
  < xs:enumeration value = "aftInteger" / >
  < xs:enumeration value = "aftByteAuto" / >
  < xs:enumeration value = "aftByte" / >
  < xs:enumeration value = "aftWordAuto" / >
  < xs:enumeration value = "aftWord" / >
  < xs:enumeration value = "aftFloat" / >
  < xs:enumeration value = "aftString" / >
  < xs:enumeration value = "aftDate" / >
  < xs:enumeration value = "aftTime" / >
  < xs:enumeration value = "aftBoolean" / >
  < xs:enumeration value = "aftBlob" / >
  < xs:enumeration value = "aftImage" / >
  < xs:enumeration value = "aftRichText" / >
  < xs:enumeration value = "aftDateTime" / >
  < xs:enumeration value = "aftMemo" / >
  < xs:enumeration value = "aftFile" / >
  < xs:enumeration value = "aftCurrency" / >
  < / xs:restriction >
  < / xs:simpleType >
  < / xs: Schema >
  < xs: Schema targetNamespace = "urn: unApWebServicesInterface".
  xmlns = "urn: unApWebServicesInterface" >
  < name XS: complexType = "TWSTransactionParams" >
  < xs: SEQUENCE >
  < xs: element name = "Fields" type = "ns2:TWSTransactionHeaderFieldsArray" / >
  < xs: element name = "Reserved" type = "ns2:TWSTransactionParams" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSTransactionHeaderFieldsArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSTransactionHeaderFields []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSTransactionHeaderFields" >
  < xs: SEQUENCE >
  < xs: element name = "Reserved" type = "ns2:TWSTransactionHeaderFields" / >
  < xs: element name = "FieldCaption" type = "xs: String" / >
  < xs: element name = "FieldID" type = "xs: int" / >
  < xs: element name = "GroupId" type = "xs: int" / >
  < xs: element name = "GroupCaption" type = "xs: String" / >
  < xs: element name = "Required" type = "xs: Boolean" / >
  < xs: element name = "DataType" type = "xs: int" / >
  < xs: element name = "Mask" type = "xs: String" / >
  < xs: element name = "FieldLength" type = "xs: int" / >
  < xs: element name = "LookupName" type = "xs: String" / >
  < xs: element name = "PrimaryKey" type = "xs: int" / >
  < xs: element name = "Language" type = "xs: String" / >
  < xs: element name = "ReadOnly" type = "xs: Boolean" / >
  < xs: element name = "LiteralMicroHelp" type = "xs: String" / >
  < xs: element name = "ExceptReadOnlyTransactions" type = "xs: String" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSTransactionExecuteParamArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSTransactionExecuteParam []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSTransactionExecuteParam" >
  < xs: SEQUENCE >
  < xs: element name = "Id" type = "xs: int" / >
  < xs: element name = "Value" type = "xs: anyType" / >
  < xs: element name = "Reserved" type = "ns1:TApFieldType" / >
  < xs: element name = "FieldName" type = "xs: String" / >
  < xs: element name = "ClientFieldName" type = "xs: String" / >
  < xs: element name = "Size of the field" type = "xs: int" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryParams" >
  < xs: SEQUENCE >
  < xs: element name = "Reserved" type = "ns2:TWSQueryParams" / >
  < xs: element name = "Fields" type = "ns2:TWSQueryHeaderFieldsArray" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryHeaderFieldsArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSQueryHeaderFields []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryHeaderFields" >
  < xs: SEQUENCE >
  < xs: element name = "Reserved" type = "ns2:TWSQueryHeaderFields" / >
  < xs: element name = "FieldCaption" type = "xs: String" / >
  < xs: element name = "ParamType" type = "xs: int" / >
  < xs: element name = "ParamName" type = "xs: String" / >
  < xs: element name = "Mask" type = "xs: String" / >
  < xs: element name = "DefaultValue" type = "xs: anyType" / >
  < xs: element name = "Required" type = "xs: Boolean" / >
  < xs: element name = "GroupId" type = "xs: int" / >
  < xs: element name = "GroupCaption" type = "xs: String" / >
  < xs: element name = "Hint" type = "xs: String" / >
  < xs: element name = "FindInList" type = "xs: Boolean" / >
  < xs: element name = "UseValueList" type = "xs: Boolean" / >
  < xs: element name = "ValueList" type = "xs: String" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteParamArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSQueryExecuteParam []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteParam" >
  < xs: SEQUENCE >
  < xs: element name = "Value" type = "xs: String" / >
  < xs: element name = "Reserved" type = "ns1:TApFieldType" / >
  < xs: element name = "ParamName" type = "xs: String" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteResults" >
  < xs: SEQUENCE >
  < xs: element name = "Fields" type = "ns2:TWSQueryExecuteFieldsArray" / >
  < xs: element name = "Records" type = "ns2:TWSQueryExecuteRecordsArray" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteFieldsArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSQueryExecuteField []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteRecordsArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSQueryExecuteRecord []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteField" >
  < xs: SEQUENCE >
  < xs: element name = "FieldName" type = "xs: String" / >
  < xs: element name = "Reserved" type = "ns1:TApFieldType" / >
  < xs: element name = "FieldType" type = "xs: int" / >
  < xs: element name = "Mask" type = "xs: String" / >
  < xs: element name = "Length" type = "xs: int" / >
  < xs: element name = "Decimal places" type = "xs: int" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteRecord" >
  < xs: SEQUENCE >
  < xs: element name = "Values" type = "ns2:TWSQueryExecuteValuesArray" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteValuesArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType".
  N1:arrayType = "ns2:TWSQueryExecuteValue []".
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < name XS: complexType = "TWSQueryExecuteValue" >
  < xs: SEQUENCE >
  < xs: element name = "Value" type = "xs: String" / >
  < xs: element name = "Reserved" type = "ns1:TApFieldType" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < / xs: Schema >
  < xs: Schema targetNamespace = "http://www.borland.com/namespaces/Types."
  xmlns = "http://www.borland.com/namespaces/Types" >
  < name XS: complexType = "TIntegerDynArray" >
  < xs:complexContent >
  < xs:restriction base = "soapenc:Array" >
  < xs: SEQUENCE / >
  < xs: attribute ref = "soapenc:arrayType" n1:arrayType = "XS: int [].
  xmlns:N1 = "http://schemas.xmlsoap.org/wsdl/" / >
  < / xs:restriction >
  < / xs:complexContent >
  < / xs: complexType >
  < / xs: Schema >
  < / types >
  < name of message = "GetTransactions0Request" >
  < name of part = "UserName" type = "xs: String" / >
  < name of part = "Pass" type = "xs: String" / >
  < name of part = "Transactions" type = "xs: String" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "LanguageId" type = "ns1:TApLanguages" / >
  < / message >
  < name of message = "GetTransactions0Response" >
  < name of part = "Transactions" type = "xs: String" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "return" type = "xs: Boolean" / >
  < / message >
  < name of message = "GetParameters1Request" >
  < name of part = "UserName" type = "xs: String" / >
  < name of part = "Pass" type = "xs: String" / >
  < name of part = "TransactionId" type = "xs: int" / >
  < name of part = "Params" type = "ns2:TWSTransactionParams" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "LanguageId" type = "ns1:TApLanguages" / >
  < name = "EditionType" type = "xs: int" / >
  < / message >
  < name of message = "GetParameters1Response" >
  < name of part = "Params" type = "ns2:TWSTransactionParams" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "return" type = "xs: Boolean" / >
  < / message >
  < name of message = "ExecuteTransaction2Request" >
  < name of part = "UserName" type = "xs: String" / >
  < name of part = "Pass" type = "xs: String" / >
  < name of part = "TransactionId" type = "xs: int" / >
  < name of part = "Params" type = "ns2:TWSTransactionExecuteParamArray" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "LanguageId" type = "ns1:TApLanguages" / >
  < name = "EditionType" type = "xs: int" / >
  < name = "IntegrationMode" type = "xs: int" / >
  < name of part = "Field" type = "ns3:TIntegerDynArray" / >
  < name of part = "KeyId" type = "xs: int" / >
  < / message >
  < name of message = "ExecuteTransaction2Response" >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "KeyId" type = "xs: int" / >
  < name of part = "return" type = "xs: Boolean" / >
  < / message >
  < name of message = "GetQueryParameters3Request" >
  < name of part = "UserName" type = "xs: String" / >
  < name of part = "Pass" type = "xs: String" / >
  < name of part = "QueryId" type = "xs: int" / >
  < name of part = "Params" type = "ns2:TWSQueryParams" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "LanguageId" type = "ns1:TApLanguages" / >
  < / message >
  < name of message = "GetQueryParameters3Response" >
  < name of part = "Params" type = "ns2:TWSQueryParams" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = "return" type = "xs: Boolean" / >
  < / message >
  < name of message = "QueryExecute4Request" >
  < name of part = "UserName" type = "xs: String" / >
  < name of part = "Pass" type = "xs: String" / >
  < name of part = "QueryId" type = "xs: int" / >
  < name of part = "Params" type = "ns2:TWSQueryExecuteParamArray" / >
  < name of part = "Error" type = "xs: String" / >
  < name of part = 'Results' type = "ns2:TWSQueryExecuteResults" / >
  < name of part = "LanguageId" type = "ns1:TApLanguages" / >
  < / message >
  < name of message = "QueryExecute4Response" >
  < name of part = "Error" type = "xs: String" / >
  < name of part = 'Results' type = "ns2:TWSQueryExecuteResults" / >
  < name of part = "return" type = "xs: Boolean" / >
  < / message >
  < portType name = "IApWebServices" >
  < operation name = "GetTransactions" >
  < input message = "tns:GetTransactions0Request" / >
  < output message = "tns:GetTransactions0Response" / >
  < / operation >
  < operation name = "GetParameters" >
  < input message = "tns:GetParameters1Request" / >
  < output message = "tns:GetParameters1Response" / >
  < / operation >
  < operation name = "ExecuteTransaction" >
  < input message = "tns:ExecuteTransaction2Request" / >
  < output message = "tns:ExecuteTransaction2Response" / >
  < / operation >
  < operation name = "GetQueryParameters" >
  < input message = "tns:GetQueryParameters3Request" / >
  < output message = "tns:GetQueryParameters3Response" / >
  < / operation >
  < operation name = "QueryExecute" >
  < input message = "tns:QueryExecute4Request" / >
  < output message = "tns:QueryExecute4Response" / >
  < / operation >
  < / portType >
  < connection name = "IApWebServicesbinding" type = "tns:IApWebServices" >
  < style: soap = transport = "http://schemas.xmlsoap.org/soap/http" "rpc" binding / >
  < operation name = "GetTransactions" >
  < soap: operation soapAction = "" urn: unApWebServicesInterface-IApWebServices #GetTransactions ""
  style = "rpc" / >
  < input >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / Entry >
  < output >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / output >
  < / operation >
  < operation name = "GetParameters" >
  < soap: operation soapAction = "" urn: unApWebServicesInterface-IApWebServices #GetParameters ""
  style = "rpc" / >
  < input >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / Entry >
  < output >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / output >
  < / operation >
  < operation name = "ExecuteTransaction" >
  < soap: operation soapAction = "" urn: unApWebServicesInterface-IApWebServices #ExecuteTransaction ""
  style = "rpc" / >
  < input >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / Entry >
  < output >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / output >
  < / operation >
  < operation name = "GetQueryParameters" >
  < soap: operation soapAction = "" urn: unApWebServicesInterface-IApWebServices #GetQueryParameters ""
  style = "rpc" / >
  < input >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / Entry >
  < output >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / output >
  < / operation >
  < operation name = "QueryExecute" >
  < soap: operation soapAction = "" urn: unApWebServicesInterface-IApWebServices #QueryExecute ""
  style = "rpc" / >
  < input >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / Entry >
  < output >
  < use of soap: body = "encoded".
  encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/".
  Namespace = "urn: unApWebServicesInterface-IApWebServices" / >
  < / output >
  < / operation >
  < / binding >
  < service name = "IApWebServicesservice" >
  < name of port = "IApWebServicesPort" binding = "tns:IApWebServicesbinding" >
  < soap: address location = "8082/SOAP/IApWebServices" / >
  < / port >
  < / service >
  < / definitions >
  
  
  
  Any help in this regard is highly appreciated.

  Hello

  In your section of type wsdl, in the second diagram that defines the targetNamespace = "urn: unApWebServicesInterface", you are not importing the schema for targetNamespace "urn: unApTypes". Addition of importation and the ns1 prefix declaration would address the error you get.

  However, there are more problems with the wsdl file-
  

• in style is null
  
• in the SOAP: the following, style is null
  
• The wsdl uses soapenc:array - which is not directly supported by BPEL.

  Hope this helps,
  Kind regards
  Yohanna.

• Can not deploy the project to the server...

  From the servers, it seems not a problem only a warning. But I can't deploy the soa on the server application.
  
  
  17:02:17 problem by sending the HTTP request on the server. Check the standard HTTP response code for 502
  17:02:17 error deployment archive sca_firstComposite_rev1.0.jar to soa_server1 zjwang - cn.cn.oracle.com:8001
  17:02:17 returned HTTP 502 error code
  17:02:17 that no error message is returned by the server.
  17:02:17 # incomplete deployment. ####
  17:02:17 error deployment archive file:/D:/SOA/samples/soa-infra/end-to-end/end2end-101-SOA-composite/end2end-101-SOA-composite/project/SOA-first-composite/firstComposite/deploy/sca_firstComposite_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

  Can you check the following:
  1. parameters of the proxy in your JDeveloper.

  2. If your SOA server is hosted on a multi-hosted (System with multiple IP addresses), and then set the address of the listening of your servers to one of the ip address that is accessible from the machine running the jdev.

  For multihomed computers:
  To get this thing working, follow these steps:
  The customer jdev machine you ping your server, it will give you an IP address.

  Now to connect to your WLS administration Console. Select AdminServer. In the General configuration, set the listen to this IP address. Do the same for your SOA managed server. Now restart the servers. Try the JDev client deployment. It will work.

  You can also paste exceptions in your soa server logs?

• problem with deployment of SOA Composite

  Hello
  
  We have created a SOA project containing a composite SOA.
  
  When we try to deploy of Jdeveloper, was not getting deployed successfully. It was not showing any errors, and there is no error in compilation as well.
  
  The deployment is make failure showing the following message.
  
  [05: 37:32] problem in sending HTTP request on the server. Check the standard HTTP response code for 504
  [05: 37:32] archives sca_DelAtRiskProj_rev1.010.jar to soa_server1 deployment error [rws60045rems - vlan1.us.oracle.com:5002]
  [05: 37:32] HTTP error Code returned [504]
  [05: 37:32] no error message is returned by the server.
  [05: 37:32] # incomplete deployment. ####
  [05: 37:32] error deployment archive file:/slot/ems3763/oracle/soa/workspace/SandR_DelAtRisk/DelAtRiskProj/deploy/sca_DelAtRiskProj_rev1.010.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  
  The Jdev version we use is 11.1.1.1.0
  
  the SOA version we use is version 11g GA
  
  Please let us know, what could cause this error or if there is another way by which we can continue with the deployment process.
  
  Any input onthis is much appreciated.
  
  Thanks in advance for your time,
  Regnier

  Raj,
  To get this thing working, follow these steps:
  The customer jdev machine you ping your server, it will give you an IP address.

  Now to connect to your WLS administration Console. Select AdminServer. In the General configuration, set the listen to this IP address. Do the same for your SOA managed server. Now restart the servers. Try the JDev client deployment. It will work.

• 10.11.6 updating killed my apps from user account

  I just installed the latest updates on the App Store (10.11.6 I guess) to find when restarting the Apps on my main user account (an administrator account) no longer work. The account is running very slow and lazy, struggling to load anything and beach regular balling.

  I have a second account, which is a Standard account and Apps work fine here. Since the Standard account, I created a second administrator account and the new account works fine too. Two of these other accounts running at a normal speed with no problems.

  This is what is happening on my main administrator account:

  During the initial load:

  http://i1185.Photobucket.com/albums/z343/twr7cx/screen%20Shot%202016-07-29%20at% 209.38.50%20PM_zpsatfzjaot.png

  After a few minutes:

  http://i1185.Photobucket.com/albums/z343/twr7cx/screen%20Shot%202016-07-29%20at% 209.42.24%20PM_zpszdvy8qqf.png

  When you try to open an application:

  http://i1185.Photobucket.com/albums/z343/twr7cx/screen%20Shot%202016-07-29%20at% 209.43.02%20PM_zpsxtusmszb.png

  That's what the new administrator account always sees in the same folders that confirms that there is in fact the Apps:

  http://i1185.Photobucket.com/albums/z343/twr7cx/screen%20Shot%202016-07-29%20at% 209.43.47%20PM_zps8mzpi9qs.png

  Any tips or ideas?

  Already restarted in Safe Mode, followed by a normal reboot?

  OS X El Capitan: start in safe mode

• iMovie to idvd

  Hi all

  I use imovie 10.1.1 and idvd 7.1.2 on a Yosemite imac and my question is this:

  I save my project in the file to my desktop, and then create a new project in idvd - no problem. However, when I burn the project to a dvd and play on a TV, the sound is good but the image is blurry and tries to keep the focus. Apparently not at what resolution I save my project of importance, the result is always the same. The film is fine on a computer and I expect a deterioration in the quality when converting to dvd, but surely he can be better than what I'm saying.

  What I am doing wrong?

  It is the quality of the source footage, or am I missing something?

  All the tips and ideas would be greatly appreciated.

  Thanks a bunch,

  Sean

  You save the file to iMovie in prores format? If the quality is good in iMovie then sharing as prores should give better results in iDVD.

• How to use Lion mountain in 2016

  Hi guys,.

  I have an iMac 2011, 500 GB and 12 GB of RAM. I use the Mavericks for the past two years. Just to make some experiments if my computer run faster more stable, I decided to do a clean install of Mountain Lion tonight. I found many articles from the Internet very well talking about Mountain Lion. I have a Macbook Pro and it in and runs great!

  But there is also news that he will receive not the more updates. How is to use the Cougar in 2016 with no improvement in safety? Macs are vulnerable to viruses and attacks than other computers? I could always run Photoshop CS5?

  Tips or ideas on how to use Mountain Lion, be happy, and not just in an island? haha

  See you soon,.

  Macs are vulnerable to viruses and attacks than other computers?

  Generally speaking, the answer is no, but they are subject to malicious software and adware, obtained from the Internet. Whether you use 10.8 or 10.11, the best way to stay safe is to be careful about what websites you visit and what you download.

• NB305-N410BN-G = FN + F8 can not activate 3G / but FN + F8 can activate WIFI

  Hello world

  You also have a problem with the switch of Toshiba FN F8 on Windows 7 Starter x 86 (32 bit). I can turn on and off the transmission of my built-in WIFI, but not my built in 3 G mobile broadband (Sierra Wireless Gobi 2000). It has worked well so far. But then I had to send my Netbook for service because the screen stays black. An external monitor and it worked fine... In any case; They exchanged the motherboard and now LCD is well again. But my 3G connection does not work, because I can not activate the transmission of the antenna.

  Real conditions / situation / comments:
  (1) sierra Wireless Gobi 2000 3 G card is present in Device Manager, it is activated and shown without problems or restrictions.
  (2) I can even test the modem successfully!
  (3) under network connections the Sierra card is present but displayed with a red X. But I can't activate it.
  (4) in addition I can disable there despite the red X already indicated.
  (5) when I run Toshiba Wireless manager shows that the card is present but transmission is switched off. "Please switch on with FN + F8"... arrgh!

  I tried already following as follows:
  (1) all installed available and past Sierra drivers Sierra 3 G driver (v1.1.140; 05/03/2010; 37.58 M)
  (2) because of the BIOS update to the latest version 1.50 = wireless connection switch is activated = and the WIFI worked very well...
  (3) installed last Toshiba Value added Package (v1.3.6; 09/04/2010; 44.36 M)
  (4) installed last Toshiba Flash Cards Support Utility (v1.63.0.5C, 28/12/2009; 9.38 M)
  (5) installed last Toshiba 3 G Connection Manager (v2.1.97, 20/05/2010; 29.28 M)
  (6) perform a restore of the entire system with recovery system (installation of a 1:1 copy of the delivered original from drive C :) partition
  (7) tried another way to complete a new installation of Windows 7 starter x 86 emty C: drive and installed the drivers from the Sierra as well as the added value of Toshiba utility to support package and flash cards
  (8) tried 3rd party software to control the connection 3 G MWCONN (found here: www.MWconn.info)-the config.exe can activate the transmission for a few seconds using the function "device / network analysis / start". This causes the broadband connection blue LED on the fronside of my netbook to be turned on for a few seconds. But üfter the test off again. So I turn on the transmission temporarily but not permanent. AND - THERE IS A MEANS OF TRANSMISSION OF SWITCH ON BY MEANS OF THE SOFTWARE! - But HOW...! ?

  What have I not tried again:
  (1) find someone with the same netbbok NB305-N410BN-G-online exchange the hard drive temporarily to test and market the Sierra 3 G in my netbook. It will be very difficult because I'm sitting in Germany actually...

  !!! Help, please! = does not, or no matter who else had same or similar problem...?

  Thanks in advance for any kind of useful tips and ideas!
  E U C A L L I

  and I also tried following:

  (9) the "Reset Flashcards" software solution

  EUCALLI

• Sudden drop in the battery life

  Hello, I am a new owner of a Macbook Air.

  For the last couple months everything works fine and the battery on my laptop lasted for at least 10 hours, but last week, I noticed that the battery life is not as long. Now when the battery is fully charged, I have only 4 hours of power.

  I don't know why the change suddenly, since I did anything differently. Maybe I am doing something wrong without realizing. In any case, I would like to ask for some tips or ideas to help me solve this problem (if it can be resolved).

  I really appreciate your help!

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• Re: IMPORTANT - how to install Windows 2000 on a Satellite L300 - 16 M (PSLB0E)?

  Hello

  I am an independent developer and absolutely need to install multiple operating systems on my * Satellite L300 - 16 M (PSLB0E) *: it is very important for me because I need to check the functioning of the software under each environment for real (not not using solutions like VMware, for example).

  Well, then, right now, I did a backup Acronis image of original full HDD, and then deleted the original scores of WinRE and data, reduced and moved from disk to the partition of Vista... and installed System Commander 8 to prepare my future multi - initialize. For the moment, everything sounds right: Vista works perfectly!

  Also note, I have configured the SATA in the BIOS Setup in "Compatibility" mode just because I don't need AHCI in my type of use!

  Second step: now, * I have to install Windows 2000 Pro (SP4) EN *. Of course, I am aware that the sticking point is the SATA/AHCI driver, which is not present in the CD of Win 2 K... So, I just make a new CD integrating these drivers using nLite; now, I tried using the driver Intel site on Intel 82801 HEM / HBM SATA AHCI controller (ICH8M) and page drivers Toshiba XP.

  But it does not completely: the Win 2 K install begins... All the drivers are well charged (including the ones AHCI) and just after this stage of loading, I get a black screen with just a blink of an eye cursor at the top left of the screen... indefinitively :-(

  I tried also to SATA mode "AHCI" in the BIOS and it's the same thing.

  So, what to do next?

  I used the wrong AHCI drivers? Do I need to integrate as many drivers Toshiba (about chipset, display, sound) in the installation of Windows 2000 using nLite CD? I mean the capacity of the CD is not reached.

  Is there a way or a tutorial to install Windows 2000 somewhere? For XP, I think it will be easier because SP3 seems to support AHCI, but earlier, my problem is to install Windows 2000: Although Microsoft wants to leave-it, there are many professionals who still use-it... And my work as a developer, is to make my software also works on this OS! * I really need to find a way to install it on this computer! *

  Awaiting your response informed and all the tips or idea that could help me to complete the task.
  In a word: HELP! Oops!

  Post edited by: eanon

  > No I used the wrong AHCI drivers?
  Perhaps.

  As far as I know that you need the crib Intel Matrix Storage and in this package, you will find the SATA drivers.
  http://www.Intel.com/support/chipsets/IMSM/index.htm

  There you have to choose to get the latest driver - version PV-> Win 2000 8.5-> there you must take the package from point 3

  Good luck