Tips for the replacement of DVD burners on Tecra series

Similar Questions

• SAT S1800-614: need for education for the replacement DVD-Rom

  Hello

  can someone tell me if there are the replacement instructions on the net for the replacement of the parts for computers laptop toshiba? And where can I find them?

  Or can someone tell me how to replace the DVD - Rom drive in a Satellite S1800-614?

  Thanks in advance,

  hubertusbee

  Hello

  I put t think that you find on the Web from Toshiba sites instructions how to fix a laptop or readers. ASP (certified partner) is responsible for the replacement or repair equipment. In this case, you can ask for opinion or statement ASP.

  Good bye

• question of northbridge nw8440, looking for the replacement of good mobo

  Hello
  I'm my nw8440 mobile workstation (T7400, FireGL V5200, 15.4 "WUXGA) seems to have some problems of northbridge and I'm looking for the replacement of the mobo.

  I can read "Maintenance and service guide" he shares the same mobo (SPS-416397-001) with nc8430 and nx8420. But is it really the same thing? Because my nw8440 is equipped with a welded gpu FireGL V5200 those others have rather a X 1600.

  Thank you

  Mac.

  http://www.eBay.com/ITM/grade-A-HP-Compaq-NW8440-motherboard-Assembly-ATI-416397-001-242A-/151323954802?PT=motherboards&hash=item233b9c4e72

  REO

• Help with settings in the capture of a 1968 for the Production of DVD movie

  I have a problem with the Premier Pro and need help.

  I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
  
  My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.

  
  

  The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.

  I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.

  
  

  Here is a picture of what appears on the screen of the Sharp VL - AX1

  
  

  

  
  

  Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)

  
  

  

  
  For any help or suggestion will be appreciated. I have this project done Friday.

  
  

  George

  The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.

  Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.

• my driver for the ROM of DVD TSST TS-L623D is corrupted. Back of the computer is displayed not in car. How can I fix it?

  When I'm looking in the Properties tab for the device in Device Manager I get - Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  BUT when checking for an update as I get - the best driver for your device is already installed. Windows has determined the driver software for your device is up to date.

  When I'm looking in the Properties tab for the device in Device Manager I get - Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  BUT when checking for an update as I get - the best driver for your device is already installed. Windows has determined the driver software for your device is up to date.

  =============================================
  It is possible that your optical drive requires repair
  or replacement.

  Also... the following article is maybe worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060
  (Windows XP / Vista / 7 / 8)

• Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) FOR the CD-ROM/DVD-road DRIVE

  I just downloaded iTunes and now my = CD-ROM/DVD-ROM Drive does not work on my Compaq laptop. This is the error that he sees when I go to Device Manager. I need this problem as soon as POSSIBLE, I work on websites and I can't go without my CD burner. Anyone who can help help please. I'm panicking right now.

  Thank you

  Hello

  Use system restore to before that you installed iTunes when the drive was working.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ======================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Win7 64-bit (pre-installed original), recovery for the 32-bit dvd disk

  I just bought new laptop toshiba L500-208 recently. And I have absolutely no idea how to deal with this new kind of things! Please help me!
  I had a number of compaq for 5 years, when I have the format window just use 1 cd and this finished!

  But now that I do not understand I have win7 64 bit (when I bought it), but I have the 32-bit recovery disc.
  I want to know that if I portable format and use this recovery disk, I won't lose 64 bit, right?
  What happens if I have 64 bit for installation next, what I have to do? Please help me too...
  Thank you very much!

  Hello

  The situation is simply. If you check the market of PC and laptop, you will see that new products will be offered with operating systems 64-bit.
  So, the production of software goes slowly in that direction.

  Toshiba offers all new notebook with 64-bit operating system, but also provide you with the 32-bit version if you feel comfortable with it and if you want to use some software not designed for 64-bit operating systems.

  Your laptop comes with the HARD drive recovery image and if you read s manuals you can find info you need to create own recovery DVDs.
  This can be done with the preinstalled Toshiba Recovery Disk Creator. The shortcut for this tool, you can find on the desktop.

  So, before you anything please create this installation disc. After doing this, you can install the 32-bit version and use so long desired.
  When you want to have the 64-bit version to use the new created the recovery for the installation disk.

  I hope you now understand how it works.
  If you have any other questions please let me know.

• HP 15 J8X12UA #ABA: what is the size of tip for the power adapter for laptop HP 15

  Can anyone provide the specifications for the tip of the HP 15 laptop power adapter? I'm looking for more details on the size.

  Thank you.

  Bill

  Reference number:

  45 W HP Smart AC adapter (NFPC, RC, 3-wire, 4.5 mm) 741727-001. 19.5V 2.31 HAS 45W

  Here is a picture with the dimensions of the cutting edge. If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  

• Satellite A60-142: Tips for the new laptop

  Hi all

  I think to buy a new laptop.
  I currently have a Satellite A60-142 and I only am not too thrilled about this model since the fan makes me crazy... It is constantly running and compared to my old laptop (Satellite 1410-304), it makes a lot of noise...

  So, I want to get a new laptop which is quieter...
  I need basically for email/surfing/Online games/digital still camera.

  Thanks for the tips!
  Ellen

  Hi Ellen

  Well, it is a known issue that, often, the fan works. If you play games or use other applications, the laptop works at high performance and the parts of the device as the processor or graphics card produce a lot of heat. In this case, aeration run also at high speed. It is a simple fact.
  As far as I know, you can try to change the settings of cooling in the power utility.
  In addition it is not easy to say which model of laptop runs more quiet. In the notebooks of high performance fans are bigger and louder by contrast office books are ineffective but easier to cool.

  It's not easy to make a choice

  Good bye

• What kind of card do need me for the replacement of mini

  Hi - First of all some context.   My husband has dementia and the only thing he can still do is some art works and send them to friends and surf the internet.   He spent hours on his old Mac Mini up to last week, when the hard drive is dead.  I took it to the Genius Bar and they said it was really dead.   The good news is that we have Time Machine and Time Capsule backup and my step son has sent us one of her old Mini as a replacement.  The problem is that the port for the monitor is totally different.  The monitor is an apple screen, but it does not replace Mini

  So I'm a bit confused as this kind of cards that I need to do all work.   Attached are some pictures of my problem:

  1 is the oldest mini back showing the port on which we used on it to connect the screen

  2 is the replacement sent by the son-in-law mini.   Display port is circled.   This is what it takes to go in.
  3. is the wire at the back of the Apple screen we have.   It is an older display.   He has three sons (one is a USB cable that we never used) the wire we used is circled.  I don't know what about the other wire.

  4 is a bulk of the wire have been used and the other wire of mystery.

  Can someone help me understand what I should buy?  Thank you!

  

  

  If I am accurate, your Mac Mini replacement is older than your previous Mac Mini; so, you will need to buy an older cable/adapter to connect to the computer with your screen. I don't know the model number of your monitor, but on the side of the computer, there must be a kind of "DVI". (Not Mini DisplayPort, Micro-DVI, or Mini-DVI)

• my driver for the ROM of DVD TSST TS-L623D is corrupted. Computer does not display the drive. How can I fix it?

  When I'm looking in the Properties tab for the device in Device Manager I get - Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  BUT when checking for an update as I get - the best driver for your device is already installed. Windows has determined the driver software for your device is up to date.

  I tried to uninstall and reboot, but it does not help.

  I am running Vista Business.

  Try to run Fixit:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

• Instructions for the replacement of 1 TB of HDD with Samsung EVO 1 TB SSD in XPS 15

  Can anyone recommend a set of instructions to replace the factory equipped 1 TB HDD with a SSD 1 TB in a XPS 15 (9530, model end 2013)?  I thought it might be a simple case of the SSD HARD drive cloning and exchanging players, but when I did it I got an error message at startup saying that I needed to make a repair - I na not to note the exact error, but he asked for the Windows installation disc.

  I don't really want to do a new install of Windows from scratch, unless absolutely necessary.

  Thanks a lot in anticipation!

  Hi Paulemm,

  You must use the Dell backup utility and restore to prepare a set of recovery disks. Those can then be used to load the operating system on the new drive. This is the best approach.

• Tips for the custom transformation script change the Associations of FK table

  Hello
  
  I try to write a transformation script that will scroll through tables in a large model and change some
  FK associations to change the remote table at CF. By the way, the reason is that our logic model
  the logical entities that represent many areas of codes of small research. However, our relational and physical model has a
  utility single physical filing table of codes that contains all areas of these codes. Therefore, a part of the transformation
  our logic model for the relational model is to swing all FK associations for these areas of research codes
  in the table of common code. Then the paintings representing the research areas can be removed from hard.
  
  In any case, I'm looking at the
  
  oracle.dbtools.crest.model.design.relational.FKIndexAssociation
  
  or the
  
  oracle.dbtools.crest.model.design.relational.Index
  
  to see if one of them can be manipulated to perform the transformation I want to accomplish.
  
  When I perform the equivalent process manually via the property sheets there are several ways to address this problem.
  
  (a) the method more jolise seems to change the FK in place by clicking on the FK in the relational schema and changing
  the property called ' PK / UK Index'. Change that to the pharmacokinetics of utility code repository table that replaces the original
  table (which represents the research field). A side effect of this translates into CF mapping
  columns being nulled out. They must be remapped to original columns (which are kept).
  So in two stages, the existing FK is detached from the original, attached table to the new table, and then
  FK columns are reused in place for new CF mapping.
  
  (b) the brute force method is to remove the original FK and then create a completely new FK to the new table. There are
  several dialog boxes that allow you to keep the original FK columns and use them in the new FK.
  
  I realize, this is a somewhat complex transformation, but I would like a few algorithmic advice on which path to take
  to try to achieve. In particular, there is a script that is equivalent to that of the first process above?
  
  I don't even know if the CF which is represented on the relational schema is represented by the FKIndexAssociation or Index
  class in the script object model. In other words, I have to loop through the tables in the relational model what would be my
  starting point:
  
  FKS = table.getFKAssociationsList ();
  
  or
  
  fkIndexes = table.getAllInds_FKeyInds ();
  
  or something else. The names of the properties in the user interface are always with the properties of scripts not so
  It's a little difficult to understand such things.
  
  Once I have access to the object that is equivalent to the FK in the property/diagram worksheet, which
  is the best way to handle via script. How can I change the end of parent and away from CF to point to the new table.
  Or if I have to delete the original CF and then re-create - is there a way to save the original FK columns and reuse them
  While creating the new FK?
  
  ********************
  
  Another question. What is the best way to remove tables from a relational model. I note that there is a remove() undocumented (?)
  a method that is available on the Table. It's probably a superclass to remove other things as well.
  
  When I try to use this method in a loop the script throws up to dialog boxes that are similar to dialog boxes that are displayed during the execution of a removal
  manually through the user interface. Is it possible to intercept and answer dialogs programmatically?
  So for example if I get a window of dialogue as
  
  You want to remove generated columns of FK 'FOO' in the table 'BAR '?
  
  is it possible to intercept this dialog in the script and then answer Yes or no it via the script?
  
  ***************
  
  If it is too difficult to perform this type of transformation with the help of script
  is to do the transformation on the generated DDL file. But it would be cleaner to
  to do the transformation in the relational model DM if possible.
  
  All advice appreciated.
  
  Rgds, BP

  When I try to use this method in a loop the script throws up to dialog boxes that are similar to dialog boxes that are displayed during the execution of a removal
  manually through the user interface. Is it possible to intercept and answer dialogs programmatically?
  So for example if I get a window of dialogue as

  You want to remove generated columns of FK 'FOO' in the table 'BAR '?

  is it possible to intercept this dialog in the script and then answer Yes or no it via the script?

  It's in the preferences - "Data Modeler > model > relational > remove FK column strategy."

  I don't even know if the CF which is represented on the relational schema is represented by the FKIndexAssociation or Index

  Is a pair of two - FKIndexAssociation, that's what you see the pattern, but it is hidden in the table index - isFK() returns true for this type of index and you can take FK with getFKAssociation()

  Once access to the object that is equivalent to the CF in the property/diagram worksheet

  table.getFKAssociations () - returns an array of the foreign keys;
  You can get to them from the relational model:
  model.getFKIndexAssociationSet () .toArray () - FK all model

  How can I change the end of parent and away from CF to point to the new table.
  Or if I have to delete the original CF and then re-create - is there a way to save the original FK columns and reuse them
  While creating the new FK?

  There should be no problem if you use the same number of columns with the same data type and order:

  get the current FK columns
  columns = fk.getColumns ();
  newRefKey is the new key question; referred and child columns must match the data type and the order in the keys - you do not ask how to get
  fk.changeKeyObject (newRefKey, columns);

  function setting in preferences, you will get the question on the columns of FK.

  Therefore, a part of the transformation
  our logic model for the relational model is to swing all FK associations for these areas of research codes
  in the table of common code. Then the paintings representing the research areas can be removed from hard.

  You can create the hierarchy of entities with the root attribute (and PK identifier) KP holding entity and entity - your look-up - empty child relationships will be these entities of the child. With the help of the transformation of the "unique Table" you will get what you are trying to achieve now with script.

  Philippe

• Tips for the TCP wait of asynchronous Messages with non-standard expression tanks

  Hi all

  I have a PITA instrument that I need to communicate with in a system of greater control.  This instrument communicates via RS232 to a server running on the PC OEM application.  In order to communicate with the instrument, I have to use the TCP protocol on a specific port on Localhost - So far so good as long the protcol is answer command.

  The problem is that the instrument sends several messages asynchronously of different sizes with a double newline as a tank of termination (there are many CR/LFS all these messages so that they cannot be a MOE) and I am struggling to find a way to manage receive asynchronous messages of variable length with a cusom CHARACTER term. without having simply a fast dedicated for TCP loop reads trying to catch these asynchronous status messages.

  I wish the functions VISA TCP has worked with the local host, given that the properties that can be set to change the chariot of non-standard term.

  Open to suggestions-

  Thank you

  Ronin

  Yes, I'll be streaming in my own string buffer and then to choose the messages out of the buffer when you find the stop character.

  A technique to improve performance, rather than reading a single byte at a time is to use the "immediate" on reading TCP mode and use a high value for the "bytes read" - in this way, it will return all of the data that is there without waiting for all the specified bytes or the time-out. He will wait only the full timeout if 0 bytes are received (which you can ignore) - set to a low value such as 100ms.

• Some tips for the Windows Live Mail 2011 0x8E5048 fixing error code?

  Live Mail not keep open, indicating that my calendar is corrupted.  Above the error code

  Hello EugenePressman,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.