Equium M50-192 doesn't start after upgrade memory
Hello
at the moment I have 2 x 512 MB sticks of memory in my laptop, I bought 2 x 1 GB sticks of mrmemory.co.uk as an upgrade. When I tried to use the computer will not start until I put the original RAM support. State Mrmemory that they sent me the correct memory for my laptop, I have done no matter what wrong?
Thank you
Andy.
Hello
I think that the modules of memory are not fully compatible or defective
It's the only plausible explanation why start Notepad doesn t
As far as I know the laptop can be upgraded up to 2 GB of RAM (2 x 1 GB) and this module should be compatible DDR2-400 and 533 Mhz 1 GB (PA3411U-1M1G)
PS: Have you tried to update the BIOS by using the old memory modules?
Check if you are using the latest version of the BIOS if it is up-to-date and check if the new modules would
Tags: Toshiba
Similar Questions
-
Satellite L300 doesn't start after upgrade memory
I have a L300 (model PSLB0A - 08H 022 number) which came with 1x2GB ram. All the info I can find suggests that it can accept 4GB.
I installed a second 2 GB of Geil DDR667 key and the system came with a lack of memory and could not start.Then I traded my single stick for a pair of the same, but I get the same result.
One of the three sticks work in itself, but no combination of two works.I ran memtest with the two installed Geils and it resulted in a corrupted display.
Can anyone help?
Hello
I think that the laptop supports only 2 GB of RAM due to the capacity of the Intel mobile chipset.
You can check you chipset in the L300 PSLB0A - 08H 022 could and then check the properties on the Intel page.Welcome them
-
Hello
I posted a question here earlier on my laptop and I had useful assistance but he juices do not appear to have sorted.
but I have now no wat it is not and just don't need to know wat it isI have a toshiba m50-192
and when I turn it on it does not start going to a black screen and gives me errors (pxe - e61)in my last question, I was told that it was the hard drive was dead.
Since then, I've replaced my hard drive and my hard drive, but it always seems to be doing almost the sameI can get into my bios and the hard drive is recognized.
I tried to boot from the disk recovery and hard drive but no joy.but since I replaced both drives when I boot from the hard drive it gos just a black screen with the little line in the upper right corner.
but when I boot from the disk it gives me this error pxe - e61, which is where his tent to boot from the network I have read.
until I replaced my hard drive, he had a strong look that has disappeared since I replaced it.
the disk hard im trying to use now is off my brother's mobile which all ready installed xp on it it would make a difference when you try to boot from the hard drive? (my laptop is xp)I read something on definition of my hard drive to the master and my cd player to the slave that would make a difference and how would I do?
I think it's as much information im aware off
could someone please help as im stuck and did not have any idea what to do
Post edited by: domio
o im also getting the and pxe - e61 pxe - m0f error codeHello!
What happens to an error you get? Please post what we can help you.
To be honest that I n don't know what you mean with clip Ribbon keyboard but if the keyboard is faulty or something else, the keyboard completely must be exchanged. You are not a unique key or something else.
If you want a new keyboard or other spare parts contact your local ASP.Good bye
-
Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory
Upgrade memory L50 - A - 1 5 pskk6e
I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.I tried to mount only the new but it won't start.
Some ideas?
I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)
But why, box for computer laptop doesn t is very simple: the new modules are not compatible.
I found modules recommended by Toshiba.
These are:
8GB DDR3L - 1600 PA5104U-1M8G
4 GB DDR3L - 1600 PA5104U-1M4GBoth are made of Kingston and the specifications are:
Memory speed: 1600 Mhz PC3-12800
Capacity: 8 GB (1x8GB module)
Pins: 204 SODIMM
Type of RAM: DDR3 SODIMM
Verifying the integrity of data: non ECC
Specifications:
Latency (CL) CASES: 11
Voltage: 1.35v -
Satellite A200 PSAEOE does not start after upgrading memory
Hi, I am first time here.
I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.
Can anyone help me, please.
Post edited by: Marian ovidiu
Hello
The A200 series supports different chipsets;
Intel 945 PM
Intel 945GM
Intel 943GMLAs far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
Take a look at your laptop s user manual * Page 18.*Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.
-
OBIEE presentation services doesn't start after upgrade
Hi all!
We just did an upgrade of OBIEE version 11.1.1.6 to version 11.1.1.9 and now the referral services do not start. The only entries that we can find in the log file are:
[2015-07 - 06T 14: 03:45.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services (OBIPS) 11.1.1.9.0 (150417.0810 64-bit Build) start. [[
Leader: sawserver.cpp
Online: 589
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:45.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Using store of credentials provider configured in the jps configuration file "H:\OBI11116\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config-jse.xml". [[
Leader: csfcredentialstore.cpp
Line: 112
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:45.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] security query's timeout is: 120 []
Leader: odbcuserpoploaderimpl.cpp
Online: 1110
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:46.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.threads] [ecid: 00iUCbv9f0eFKA ^ 5xVL6iW0001Zk000001, 0] [tid: 5584] verified integrity \\?\H:\OBI11116\instances\instance2\tmp\OracleBIPresentationServicesComponent\coreapplication_obips1\earmanager\analytics\B+52gsvcqjfDoqONRCPQxA [] analytics.war
Leader: earfilemanagerimpl.cpp
Online: 84
Geographical area:
Saw.threads
]]
[2015-07 - 06T 14: 03:46.000 + 02:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.local.checkforcatalogupgrade] [ecid:] [tid:] update is recommended in the latest version of the catalog. [[
Leader: localwebcatalog.cpp
Online: 250
Geographical area:
Saw.Catalog.local.checkforcatalogupgrade
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:46.000 + 02:00] [OBIPS] [WARNING: 16] [] [saw.security.odbcuserpopulationimpl.getbisystemconnection] [ecid:] [tid:] cannot get a login system for Server BI (attempt 1 500) user. Sleeping for 4 seconds before trying again. [[
Leader: odbcuserpoploaderimpl.cpp
Line: 1054
Geographical area:
Saw.Security.odbcuserpopulationimpl.getbisystemconnection
Saw.Security.odbcuserpopulationimpl.searchidentities
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.connectionPool.getConnection] [ecid:] [tid:] authentication failure.
ODBC driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
[nQSError: 43113] The message returned by OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
(08004) []
Leader: Connection.cpp
Online: 471
Geographical area:
saw.connectionPool.getConnection
Saw.Security.odbcuserpopulationimpl.getbisystemconnection
Saw.Security.odbcuserpopulationimpl.searchidentities
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.security.odbcuserpopulationimpl.getbisystemconnection] [ecid:] [tid:] could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
Authentication failure.
ODBC driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
[nQSError: 43113] The message returned by OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
(08004) []
Leader: odbcuserpoploaderimpl.cpp
Online: 1033
Geographical area:
Saw.Security.odbcuserpopulationimpl.getbisystemconnection
Saw.Security.odbcuserpopulationimpl.searchidentities
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.security.odbcuserpopulationimpl.searchidentities] [ecid:] [tid:] error in retrieving data from the API of Population user of the Oracle BI Server user/group.
Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
Authentication failure.
ODBC driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
[nQSError: 43113] The message returned by OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
(08004) []
Leader: odbcuserpoploaderimpl.cpp
Online: 462
Geographical area:
Saw.Security.odbcuserpopulationimpl.searchidentities
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 10] [] [saw.security.userpopulationmanagerimpl.initializeroles] [ecid:] [tid:] error in retrieving data from the API of Population user of the Oracle BI Server user/group.
Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
Authentication failure.
ODBC driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
[nQSError: 43113] The message returned by OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
(08004) []
Leader: userpopulationmanagerimpl.cpp
Online: 279
Geographical area:
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.security.userpopulationmanagerimpl.initializeroles] [ecid:] [tid:] error seeking roles in the backend to resolve the GUIDS during initialization of user population [[] Manager
Leader: userpopulationmanagerimpl.cpp
Online: 280
Geographical area:
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.security.userpopulationmanagerimpl.initializeroles] [ecid:] [tid:] error in retrieving data from the API of Population user of the Oracle BI Server user/group.
Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
Authentication failure.
ODBC driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
[nQSError: 43113] The message returned by OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
(08004) []
Leader: userpopulationmanagerimpl.cpp
Online: 281
Geographical area:
Saw.Security.userpopulationmanagerimpl.initializeroles
Saw.Security.securityimpl.Initialize
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 1] [,] [saw.catalog.local.loadCatalog] [ecid:] [tid:] error loading the initialization/existing catalog: H:\OBI11116\instances\instance2/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obips1/catalog/sample.
Error during extraction of data from the API of Population user of the Oracle BI Server user/group.
Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
Authentication failure.
ODBC driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
[nQSError: 43113] The message returned by OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
(08004) []
Leader: localwebcatalog.cpp
Online: 395
Geographical area:
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
]]
[2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services are shut down. [[
Leader: sawserver.cpp
Online: 867
Geographical area:
Saw.sawserver
Saw.sawserver.terminatesawserver
Saw.sawserver
]]
We have tried to update the GUID, check the password user in the BW system, creating a new catalog. But nothing seems to work. Can someone help us please?
Thank you!Hello..
We've also thought of it... In the successful company there is a custom variable 'virtualize' set to true, it gave some problems. We changed the value false and now it works!
-
Equium M50-192 will not start - HARD drive problem?
Hello
can someone help me please
I had a Toshiba laptop. I had for about 3 years, every time I turn it on it gets to the Toshiba logo, but won t charge up.So I tried to put the recovery disk in and boot from the disk or try to restore but it won t anything off the drive, it gets the full recovery of the hard drive, but when I select the option to do this, it just says: for a drive partition error checking please try again?
My hard drive is not partitioned. It also makes a funny clicking on in the touch mouse pad is one then after a while a beep. I left it and woke up and it was like that
Sorry I'm not very good with computers of m.
If any 1 got any idea please helpJust noticed in my bios it says hard disk = none?
Hello!
What Satellite laptop do you have?
I think that your HARD drive is defective, but you can check with the Drive Fitness Test.
http://www.HitachiGST.com/HDD/support/download.htm#DFT
Download the image, burn it to a disk and boot from it.Good bye
-
NB305 - does not start after upgrading memory
Have just bought 2GB memory update for Toshiba NB305-106, and it does not work. Machine unbootable - started 1 GB module.
Just read a post on memory upgrade problems - different users having problems and they used Crucial memory without any problems. -Is it true?
Anyone got an advisor?Hi ian123,
If the boot netbook doesn't, additional memory module which means this module is not compatible and you need another.
It would be interesting to know which module you are buying exactly and what specs it has.
Can you post this information?In General, I have good experience with the modules of Kingston
-
Satellite M30X-122 does not start after upgrading memory
Hello
I want to upgrade the RAM in my Satellite M30X 122. Correctly my NB contains 2x256MB.
I bought a GB 1 333 MHz. Cl2.5 module PC2700 (corresponds to the former, but more grand ;-)))
Now I build in the module, but after the build-in system is dead.
It doesn't show anything on the screen (after pressing the button one)).Does Anyboby have some tips?
Thank you very much
PeterHello
Toshiba has recommended the use of these memory modules:
PC2700 256 MB (PA3311U - 1 M 25)
PC2700 512 MB (PA3312U - 1 M 51)
1024MO PC2700 (PA3313U-1M1G)Well, the size of 1024MB should be compatible. In this case, it s not a module size.
Have you tried to get into the BIOS? BIOS recognizes the memory module?
Maybe the module is broken?In my opinion, you should check if the module memory works on a different unit. If this module works correctly on another unit if your M30X doesn t support this module of memory and you need one another.
-
R50E does not start after upgrading memory
I tried to upgrade this laptop from the factory of 512 MB to 1.5 GB. I got a Kingston 1 GB DDR - 333 SO-DIMM, but after I installed it, the laptop does not turn. Only the power led is lit.
I don't know why this happened, because all tests indicate that it should work.
1. the new stick is ok. I tested it in another laptop and it worked. I also cleaned the contacts with isopropyl alcohol.
2. the memory locations are ok. The old memory works in each slot.
3. I tried to install the new one stick in a slot and it did not work.
4. This update is officially supported by record of IBM and BIOS is up to date (v2.1, December 2006).
Unless I'm missing something there is a confusing question. Unfortunately, I don't have an another 1 GB DIMM to test with.
yehuda1 wrote:
TBut I don't think it's a matter of density. something fundamentally wrong with this system. I just discovered that I can not upgrade the memory somehow, even not with a stick of 256 MB. The system starts only with the current key.
OK... This is not good, but I have to tell you that...
I guess it's time to throw the boy part of retirement and move to a new machine...
Good luck.
-
Satellite L100 113 does not start after upgrading memory
Hello.
Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(
I read manual - this laptop supports 533 PC4200 memory modules.
But SO-DIMM 533 MHz will be delivered in one month...
The memory modules, we can install to Toshiba L100-113?
Thank you.
Hello
I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.
Please visit this memory 3rd party:
[Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]
As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM
Concerning
-
Satellite A60-672 does not start after upgrading memory
Hello
I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.
Peter
Hello
I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.
In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Good bye
-
Satellite M100 does not start after upgrading memory
I recently bought two sticks of DDR2 1 GB 533 Mhz RAM memory.
I placed both in the slots (the one under the keyboard and one at the rear).For some reason any when I try to turn the computer back on to, nothing happens.
The screen is black and nothing seems to load.Help please!
The case is clear like a Crystal;
The M100 cannot start because memory modules are not fully consistent or both modules or only a single module is defective.
I put t see any other solution to test for laptop with other modules
-
Satellite 1410-304 does not start after upgrading memory
I tried to extend the memory of 512 MB to 1 GB by placing two memory modules in my laptop Satellite 1410-304.
These blocks of memory are each 512 MB and type: DDR400 PC3200 SODIMM.Each memory separate block in one of the memory slots A or B works well, no problems.
However, when the two blocks of memory are installed, the laptop does not start no more.
I hear the soft beeps indicating that a problem has occurred. The system works under Windows XP.Someone who can tell me how to solve this problem. Thanks in advance for your help
concerning
Marten
Memory sticks are made by the same company? If this isn't the case, it will not work.
-
Satellite C660D-107 does not start after upgrading memory
Hi all
I just bought a Kingmax 4 GB 1333 Mhz memory for my laptop C660D-107.
Yesterday, I put and I saw on the BIOS if the laptop recognizes it or not.
The laptop showed the 4 GB memory but when I booted the machine nothing happened.Black screen and nothing else.
The specification to write 8 GB of RAM maximum (1066 Mhz).
I think that 4-4 GB. The frequency is perhaps the problem?
Opus 64-bit Win7 systemconcerning
Robert
Hello
The bus front end (FSB) manages 1066 Mhz max.
Thus, your memory at 1333 Mhz Kingmax cannot operate at 1333 Mhz.
Usually, this should not be a problem and modules more quickly would run slowly at 1066 Mhz but there may be a compatibility issue.Edit the memory at 1066 Mhz I have so I recommend using modules from Kingston and hand never any problem.
Maybe you are looking for
-
Problem with LAN Express airport
Hello I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected
-
Satellite A135-S2386 - sometimes free WiFi does not work
There are moments that my wifi is not working... (even if I'm on the wifi area).If I went on Wi - Fi, light does not turn, but sometimes it does. What seems to be the cause of this problem? Please bare w / my English. :)
-
How to check my identity?
Hi, I go the settings-> iCloud-> password and security. I want to change my Security Questions, because I have lost the answers, I would also like to set up an alternate email address. I can't do these things because when I type the Questions of safe
-
How to set the keyboard Viewer in a language other than the main keyboard?
is it possible to set the keyboard to the screen the viewer into another language (German) than the main (English) keyboard as an easy way to use the keyboard Viewer to make the German characters and umlauts while typing with the keyboard layout Engl
-
Virus that stops at your computer
I think I have a virus, he got yesterday. When I turned on my computer, everything seemed fine. It closes without warning, tried to restart, shut down once again, restart, windows loaded, 10 seconds later stops again. Screen says my computer was i