TMS + CUCM telephone directories

Similar Questions

• EX60 - Manual of telephone directories

  Is it possible to create an address book and manually transfer unit EX? I have a client who is not MSDS, but want to deploy telephone directories, that's how I notified address books are managed. I tried to extract the file and change myself but now with TC7 we lost WinSCP is a challenge.

  You can do via the CLI with the xcommand contact directory add API command - or via the web interface.

  WinSCP is still available to connect to the endpoint, but you must use the "remotesupport" under TC7.x account.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• TMS, CUCM and MCU

  Hello

  One of our clients have a MCU5320 and it is registered with the CUCM as SIP. Also, they have a VCS + Expressway VCS control for internet calls. Now the customer plans to buy Cisco MSDS management systems and planning conferences. I don't know if we can schedule conferences on the MCU that is registered with the CUCM VCS not only through TMS. Where do I sign the MCU to the VCS to program by MSDS?

  We want to do this because we do not have enough licenses non-traversal appeal with respect to the control of the VCS.

  Kind regards

  Chambers oumar

  Hi Marc,

  If you register with CUCM MCU, you wil not be able to plan the Conference through it. You can use it for ad-hoc conferences.

  However, if you register MCU with VCS, you can use it to conferring both scheduling and ad - hoc MCU.

  However, if you go for TMS, your TMS can also monitor CUCM. I'm not sure benefits.

  It will be useful.

  Thank you

  Saurabh

• Directory IX5000

  Hello

  I understand that maybe a simple question for some people so I hope that there may be a quick response to my question here.

  The long and short of this is I want to add a directory to the IX5000 installation which is not drawn as part of the global directory / corporate to the call manager.

  The reason is that we have a deployment centered on the VCS which is managed by TMS that where all of our systems have URI, the URI system is not visible on the IX5000 which is registered to call the Manager.

  We have relevant trunk between the CUCM cluster and the VCS cluster setup so the routing of calls is there, but the room users are unable to see the systems.

  How can I add a specific system to an IX5000 directory, I can complete this via a personal phone book, or are there other ways?

  See you soon

  Dave

  Appears that the IX5000 series only supports the UDS via CUCM telephone directories, see ix5000-Directory-behavior. I checked and original research I could not find anything to indicate if she supports the TMS as a source directory still in areas indicated by Chad in the linked thread.

• Integration of CUCM, CTS and TMS

  We currently have a 8.6/CTS-Man/CTMS CUCM environment for our telepresence system.  All systems are CTS only.  Currently, connect us to a Tandberg system via Server CUBE/VCS/telepresence.

  We are looking at the possibility of integrating the two systems together.  This would involve decommissioning our CTS-man and using their existing planning TMS.  Networks would be open to each other so that they didn't cross highway of CUBE/VCS.

  Can someone tell me please to some documents on the integration of the TMS with our CUCM for planning?

  Furthermore, is it possible to have a single MSDS to perform the planning on the two CUCM registered CTS and saved VCS Tandberg endpoints end points, as well as to perform planning tasks for Community trade marks and MSE8000/telepresence Server?

  Thank you

  Hi Nick

  It is a very good question, and the bellows are drawn from the responses on the features that each product can provide you (CTS - Man and TMS) however as we know the TP Cisco world is changing and moving quickly if the bellows has been updated / changed and can someone comment on this topic will be great for us

  Meetings 1-booking

  TMS:

  -adhoc and meetings,

  -3rd-party endpoints reservation.

  -Ms Exchange, Domino, and API

  CTS - Man:

  -mainly used for endpoints STC booking

  -You can book and include cisco webex

  -Ms Exchange, domino and API

  2 features

  TMS:

  -End suppliers Multi points

  -Telephone directories

  -planning of conf

  -management endpoints (monitoring, Reporting, strong alerts... etc)

  -commissioning

  -integration with 3rd party such as Ms exchange

  -"There is no button to push" for the endpoints of CTS (you can add CTS alis for TMS rooms and book it or add the E164 of the external endpoint CTS as a participant and not these means are a button to push the meeting!

  CTS-MAN

  -integration of calendar

  -Midware between CTS, CUCM system and society of calendaring system

  -provide 'a button to push' scheduled meetings

  -provide interoperability simplified such planning via Cisco MXE

  -Live English option and CTMS geographical selection

  for each of them can provide you with options and features and its depends on the needs of your business, you could keep both or just go with one, if you have endpoints of VCS I would say for sure to the TMS

  HTH

  Marwan

• TMS and registered CUCM phones (endpoint No. TC points)

  Hello

  A customer has a lot of 9971 series and other video capable ip saved in CUCM phones which are obviously not the criteria of TC.

  How can I go to add to TMS? Are they added only as unmanaged endpoints?

  Is it possible that I can force the TMS or the conductor also to call them so that they can join a conference?

  We have some use VIP users who want to call rather than compose themselves at the Conference and they have no endpoint of TC.

  Thanks in advance for the help!

  You probably don't have to add CUCM in TMS, unless you want to add any endpoints mentioned some of my first answer in TMS, although it wouldn't hurt to add it anyway.

  You can add IP phones as unmanaged endpoint points, although this will consume a TMS system for each license added.  If you have plenty of endpoints that you want to add and you do not have enough licenses, you can use a directory phone, as mentioned earlier, see the "Manage Sources of phonebook" on pg 187 for more details.  You can schedule video conferences using two methods, but Smart Scheduler is unable to add participating telephone directories, so the TMS advanced scheduler should be used if you add participants from telephone directories.

  What you do above in the TMS for the planning of endpoints has no impact on its PMF, you can add endpoints you want logged in as a favorite yourself in your TMS user portal.

• Design of the telephone directory of TMS

  SALVATION of Netpro

  I have a VCS - C AND TMS located within a DMZ. The VCS-E is on the public internet.

  All internal clients are saved on the SCV - C and pull the telephone directories of TMS - OK.

  I would like to publish directories TMS to devices that are registered with the VCS-E

  Our compnay is a global organization and we have external companies with the internet only C20 end points which are registered in our E-VCS.

  My goal is this - I would like to have a global directory that all systems have access to via registration VCS /TMS

  Is the only way to achieve this goal to create two TMS servers who ask the same PB? A single server TMS on the DMZ with a NAT translation on a public address and a TMS server inside the network to all WAN / LAN clients?

  Or y at - it another way to reach my goal?

  Thank you

  Stem

  Well, the directory is transferred using http, which means that endpoint must join the tms on http or https in order to get it. An alternative would be to open port 80 or 443 so that MSDS are available on the public internet, which is what you eventually to do. If you use a double tms pointing to the same database where a single server is public you anyway compromising server tms to the public internet from the info you get would be the same no matter which tms server you connect to because of the shared db. The c20s must be added in tms as well (but not accessible by the MSDS if it is a system of soho) in order to obtain the authorization to access the directories that you set on the system. But there is no need to be very complex, as long as the endpoints can reach the tms of the internet server.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Telephone directory of TMS export

  Hello world

  We have a server TMS configured and running, with several pounds of phone manual list.

  Now, I am deploying a new TMS and configuring everything from scratch (do not use existing databases), including telephone directories.

  I have re-created small manuals phone books, but I have several large (100 + contacts) and it would have took me ages to manually recreate the institutions.

  So, is it possible to export or copy the directories created manually 'old' TMS to the new?

  Thank you

  Petar

  You can export directories to a file, see the section "Export Contacts to a file" in the pg 203 15.3 TMS Administrator's Guide .

  It is also requested several times in the forums on how to export contacts from the phone book:

  TMS-export-directory-question

  How-Add-Excel-file-Address-Book-TMS

  How-can-i-Export-TMS-phonebooks

• Numbering plan of TMS actions required when changing the VCS

  Hi all

  I will be changing my exclusively H323 to SIP client only VCS dial plan. This will be done to activate the route through VCS - E and also prepare for the migration of their VC on CUCM endpoints at a later date. When I change the dial plan I'll change the end point URIs, aka Multiway and digital beaches assigned to scheduled meetings.

  Can you please help me understand what I need to do to make sure that:

  1. MSD directories are updated with new endpoint aliases; and
  2. Existing meetings are moved to the new number ranges

  Thanks in advance for your advice.

  Telephone directories TMS should update automatically as long as they do not use a source directory manually.  You should see the telephone directory changes some time after you migrate the H323 to SIP endpoints points, depending on how often you have telephone directories to update.

  A regular conference will have to be updated to reflect the change dial plan, you can simply change the Protocol that uses H323 to SIP endpoint in the settings to connect to the Conference.

• By TMS MCU conference number

  Hi all

  We recorded with vcs several MCU Standing Conference, the source of the telephone directory of endpoint is TMS. I am able to discover and manage all the end points of TMS.

  How to display the number of MCU Permanent conference on endpoint through TMS telephone directory? So that users could dial into permanent conference of the directory itself?

  Currently, I have discovered all the endpoints of TMS and its appearance on all telephone directories of endpoint.

  Thanks in advance!

  Bobby

  Hi Bobby

  Create a new source 'manual list type' less manage sources of the telephone directory. Save and add a contact. Type the conference name, add it.

  Now click on the add contact method and write the address you use to dial the Conference. SIP or H323, (E164 alias is H323)

  Save it and go in manage inventories, create a new directory and connect the source you just created. Then click on set on systems and select all the systems you want to see this directory. And save.

  Every endpoint should now be able to compose this conference through the phone book.

  / Magnus

• TMS Directory link ISDN paired devices

  Hello world

  I currently have a problem trying to get a directory TMS containing details of ISDN on a SX20 with an ISDN connection.

  I created a manual list directory in TMS that contains details whether H323 or ISDN for various parameters.  The directory is detected by the SX20 and it shows all the details of H323, but none of the ISDN are listed.  The same directory, when it is applied to an edge 95, displays all the entries.

  I tried to create a directory containing only the ISDN numbers, and assigning that to the SX20 and then nothing is indicated.

  My first impressions are that that TMS has information as an 'ISDN' entry, and as SX20 has similar directory information stored in the form "H320", that the two are not compatible / correcftly - translation and so it's a TMS bug and/or TC software.

  In addition to the telephone directory, all the other functionality works as expected.

  Versions:

  TMS: 14.1.1

  SX20:TC7.0.1

  ISDN link: IL1.1.0

  Edit: I tried to push the same directory for a C60 and who was not either - TC6.3 - only the H323 entered were seen running - ISDN those lacking, is not purely a matter of SX20.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

  Hello

  There is no link to the SFT ISDN support. When 'route telephone directories' is set to Yes, TMS removes the entries she wants not the point endpoint to deal, that is what is happening here. TMS knowledge, SX20s cannot dial numbers H320.

  ? Kjetil

  Sent by Cisco Support technique iPhone App

• Question from TMS Export Directory

  Hi all

  I'm working on version 14.5 MSDS and I would like to export my file system directory, so I followed the section 'Contacts to export to a file' described in Cisco TMS Admin Guide 14.5:

  1 create a phone book.

  2. click on connect to this directory.
  3. Select the sources you want to export the contacts since then.
  4. for the Type of update for these sources, select Import to Cisco TMS or import to Cisco TMS and the source directory export.
  5. now select the base directory file source that you want to export.
  6. to update for this source Type, select Import to Cisco TMS and export toward the Source of the telephone directories.

  The problem is when the option choffeur to step 6, I found that I could not find 'Import to Cisco TMS and ExportSource telephone directories', only 'Import of TMS' or 'search only '? I don't know if it is to export the file and where can I find?

  As an attachment, you can find a screenshot.

  Thanks for your help.

  Sofiane

  Hi sofiane__

  I must say that it is more idiosyncratic and intuitive things I've met in a long time, although once you get your head around it, you can see the logic of programmers (although they could have made it real simple).

  You must have a SOURCE directory, which is a 'phonebook database file', then you must select that as the source within you, phone book and the value 'import and export '. All other sources of the telephone directory are defined to import into this directory...

  The exported CSV file will then appear on the MSDS Server (somewhere like "C:\Program Files (x 86) \TANDBERG\TMS\wwwTMS\data\ExternalSourceFiles") and is not the same has the file you may have used to configure the directory file-based in the first place.

  Hope this helps

  See you soon

  Chris

• Passing of TMS physical server in VM with external SQL Server

  What we have:

  13.2 physical TMS with TMSPE running on the Windows Server 2003 Enterprise with SQL server 2005.

  Application of TMS, tmsng, and TMSPE all located on the same server.

  What we wanted to do:

  Move the 13.2 TMS with TMSPE to 2008 r2 VM with tmsng located on the separate server from SQL 2008 VM (external).

  First attempt; the physcial and TMS VM servers with the same host name, the different IP addresses.

  (Physical server removed from the field after copying tmsng db and taken offline - changed then to the TMS VM server host name).

  13.2 of TMS and TMSPE installed smoothly on the virtual machine, we copied then the db tmsng existing since the physical server on the SQL 2008 VM server.

  Everything seemed fine, except that we could not clearly one of the TMS tickets tell us different MST services were not running, this despite the Court and restaring every MSDS services several times.

  TMPSE diagnosis showed all green, but the VCS - C told us a different story; with all of the connections; telephone directories and devices, users will fail with an http 400 error.

  At this stage our window of opportunity was closing quickly, we had to go back and bring back the old physical server, on the line.

  During testing, we used different for the physical host names and servers of MV, but we found TMS2 tickets thrown indicating different services of MST did not run on TMS1, so we thought we would try with identical host names for TMS1 and TMS2.

  There are some dependencies that we missed?

  Any advice on how to achieve better would be much appreciated.

  see you soon

  /Jens

  Hello

  I have seen this problem several times before and his tickets basically generation because it has a double set of services listed in under TMS Server (below), the following list Maintenance TMSNG db when you move it, it shows that there are for example 1 TMS Live Racing Department and one stop of service TMS Live where the next generates this ticket. Simply click the clear list to solve the problem.

  Regarding the TMSPE, have you moved the db TMSPE more on the new server or you let it run to the old?

  At all the configurations to correct in terms of user name / etc in the field configuration settings?

  Best regards

  Magnus Ohm

• TMS Configuration Dump

  Is there an equivalent of xconfig or xstatus TMS?

  I am creating a document as built to deliver to clients and operations, and I'll have to copy each field one at a time.

  Is there a better way to do it, maybe a way that I can get the TMS configuration in a spreadsheet or CSV any.

  If need be, I'll go into the SQL to get data, but I don't really know how to do either.

  Advice, tips or advice that someone wants to share?

  Hi michael

  There is no xstat xconf for tms. Everything is contained in the tmsng database.

  So, you can install sql Management studio, back up the database, restore it to another sql server. Then connevt the tms to her application.

  The db contains practically everything. Including the keys to unlocking and keys options. Telephone directories a config backups since endpoints etc. etc. The table in the db that speak you a little of the tms is the dbo.tmssetting. But I would not waste his time in there if your not comfortable with it.

  Sent by Cisco Support technique iPhone App

• TMS Type of update directory: search only

  Currently, we have two telephone directories that "import us in TMS' of their source of the telephone directory, but you want to change the settings for"Search only"due to the length of this particular directory.  I know that rather than display all entries in the phone book in a huge list like it does when it is set to import, to search to pull up to the entrance they want.  In what way, if any will to change this setting has no effect on demand conferences that use this particular directory if it is set to import or search?

  Thank you!

  If the directory is set to "Search only", you will not be able to use these contacts in regular conterences.

  -Zac

  * UPDATE *.

  You will be able to add the contact to the conferences, but TMS will display 'Entry deleted directory' for contact when go back watch the Conference. TMS also displays a warning if you view the connection tab for the routing of the call of the Conference details. I confirmed this today, and I filled a defect with regard to this. CSCui45154 The default is new, so it will not be publicly visible.