Numbering plan of TMS actions required when changing the VCS

Similar Questions

• Information required when changing the user password special appl

  Hello
  
  We have a requirement where we need to change the password for the following users.
  
  IBEGUEST
  IBE_ADMIN
  IRC_EMP_GUEST
  IRC_EXT_GUEST
  OP_CUST_CARE_ADMIN
  OP_SYSADMIN
  ASSISTANT
  
  Let me know whether autoconfig/application closing or not while we change the password?
  
  Version:-EBS 11.5.10.2, DB 11.2.0.2
  
  I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!

  Vicky1 wrote:
  Hello

  We have a requirement where we need to change the password for the following users.

  IBEGUEST
  IBE_ADMIN
  IRC_EMP_GUEST
  IRC_EXT_GUEST
  OP_CUST_CARE_ADMIN
  OP_SYSADMIN
  ASSISTANT

  Let me know whether autoconfig/application closing or not while we change the password?

  Version:-EBS 11.5.10.2, DB 11.2.0.2

  I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!

  It is not necessary. Please note that changing the password for all users of the application (except the GUEST user) does not require running AutoConfig or bouncing the application services.

  What is the Impact of a seeded Oracle users disabling? [418767.1 ID]
  Is it safe to Date Some Applications end users as a GUEST? [783428.1 ID]
  Configuration Guide for Oracle E-Business Suite 11i [ID 189367.1]

  Thank you
  Hussein

• Full windows reinstall required when changing the motherboard?

  Hello, I have recently built a new custom PC (my first yay!) and I quickly realized that my motherboard was faulty. I'm sending it back for a replacement but I had already installed windows 7 with important files, I need on the partition primary drive. I'll have to perform a complete reinstallation of windows on my new motherboard before activation of windows, or it will go directly in activation? If I need to do the reinstall then what is the best method to back up all my files?

  If you simply replace the motherboard, then you should be able to boot Windows 7 on it without problem.

  Windows 7 license now installed an OEM license?

  If this is the case, then it is not transferable to a new motherboard, but given the circumstances, you can try reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
  http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/

• got black screen when changing the screen background images

  got black screen when changing the screen background images

  can any one help

• Should I reset the FPGA FFT when changing the input signal?

  Hello

  I have an application based FlexRIO where I do FFT on several incoming signals. The signals will be ranked so that I get first for example 4096 samples of Ch1 and Ch2 4096 samples, etc. This means that I don't have to do it in parallel of the FFT and I would like to reuse the implementation of FFT and windowing to reduce the use of resources.

  I intend using the VI Express followed by the Express VI of FFT window scaling

  http://zone.NI.com/reference/en-XX/help/371599J-01/lvfpga/fpga_scaled_window/

  http://zone.NI.com/reference/en-XX/help/371599J-01/lvfpga/fpga_fft/

  and I'll use them inside a SCTL.

  This figure comes from the section using the FFT and help illustrate the issue:

  

  There is a discount to zero terminal for the fenestration and the FFT VI.

  Are there internal registers in the windowing and FFT which force the image 1, image 2,... from the same signal or is it possible for the first entry in a framework of Ch1, the next frame belonging to Ch2, Ch3 gaze and so on and always get reliable results?

  Another way to ask the same question: if I have to reset the window and FFT when changing the input signal?

  Thank you

  Anders

  Hi Cyphish,

  When using the FFT of the LabVIEW FPGA vi express and windows nationwide express vi calculations are make it point by point so there will be no problem when going through different types of measures. Therefore, you should have no problem with your application.

  Best regards

  Menelaos.K

• How can I avoid losing image changes I've already done when changing the name of a folder?

  How can I avoid losing image changes I've already done when changing the name of a folder? Whenever I have change a folder name (after having published images), Lightroom "updates" the images in this folder and any changes I've made have disappeared!

  Thanks for the update.

  This isn't the correct workflow.

  When you rename a folder outside of Lightroom, it causes the link between this issue and Lightroom to be broken and images will be missed in the Lightroom Catalog

  and if you re-import them same images after that, it will import the original images and not the changes

  Lightroom does not store the original images it contains. It works on the previews and the changes you make are stored only in Lightroom.

  So, you have to rename or move this folder in Lightroom instead of doing outside so that you do not lose your changes.

  To rename a folder, select the folder name in the library module > right click / Control click and select Rename folder.

• How to add italics or bold words when changing the webtext in catalyst

  How can I add words italic or bold in plain text when changing the webtext in catalyst?

  Hello

  While using Business catalyst in browser edition feature on Muse published the site, it will only make changes to the text, not formatting them. So if there is a sentence in bold in muse and after the publication of the site, if you try to change the style of this sentence, which is not possible. You can change the words, but they will remain in bold.

  Let me know if you have any question.

• 500 unexpected substitute error when changing the id of the application in - app. XML

  Hi, I'm debugging my app on the real PlayBook,

  I decided to change the application in the - app.xml id, since then, I get an error "500 unexpected substitute" when you try to run the FB4.5 application.

  This threa500 unexpected substitute at the launch of app browsing I understood the problem came from the ID of the application being changed, but not the inner packaging ID used to reference the app in the PlayBook.

  This is verified by looking inside the bar file for application id generated old and new application id, package id remains unchanged. (I think it's actually a bug in the SDK, I'd love to have confirmation of this from someone competent)

  so I thought OK, I'll just delete the app from the PlayBook to clear the former association IDPack applicationid and reinstall...

  but still no hope.

  Here is a detailed description

  old id of the application has been myOldAppID

  new application id is myNewAppID

  generated from the package id: myPackID (even for the two application ID)

  It seems that the PlayBook maintains a list of applications that have already been installed on it: I tried to delete the application from the command line using blackberry - deploy and the package id (obtained from the .bar):

  blackberry-deploy -uninstallApp -device 169.254.0.1 -password *** -package-id myPackID
  

  The app is removed as planned, it is deleted from the PlayBook, the command displays the result menu

  Info: Sending request: Uninstall
  Info: Action: Uninstall
  Info: Uninstalling myPackID...
  Info: Processing 0 bytes
  actual_dname::myOldAppID.debug.myPackID
  actual_id::myPackID
  actual_version::
  result::success
  

  The result, we see that the PlayBook concludes the old reference to my application and displays the ID of the application on line actual_dname

  now, if I run the same command, but with an obviously wrong package ID:

  blackberry-deploy -uninstallApp -device 169.254.0.1 -password *** -package-id someWrongID
  

  I get the result

  Info: Sending request: Uninstall
  Info: Action: Uninstall
  Info: Uninstalling someWrongID...
  Info: Processing 0 bytes
  actual_dname::
  actual_id::someWrongID
  actual_version::
  result::success
  

  Note the line actual_dname is empty, there is no reference for the application with package ID someWrongID

  Here, I'd rather see an output like "application not found for package id someWrongID" but anyway...

  So if I run the same command again, with my application package ID, I expect the line actual_dname will be empty, because the application has already been deleted, but the result is always:

  Info: Sending request: Uninstall
  Info: Action: Uninstall
  Info: Uninstalling myPackID...
  Info: Processing 0 bytes
  actual_dname::myOldAppID.debug.myPackID
  actual_id::myPackID
  actual_version::
  result::success
  

  Here, I see that the PlayBook still holds the former association of myOldAppID with myPackID, even if the application has been removed...

  I tried to restart the PlayBook, cleaning and reconstruction project, all without result... the reference remains in the PlayBook, and myPackID remains unchanged.

  NoI am blocked, if I want my app to debug, it seems that I must leave application ID with the old value...

  I would like to know, is it possible to remove completely an application and all of its references, of the PlayBook?

  And there at - there someone who can explain how the Package Id is generated, and if it's a bug or a feature?

  Thank you!

  Hi Julien,

  This problem is supposed to be fixed on the latest SDK version: 1.1.1. Could you please confirm what command line tools do you use?

  blackberry-airpackager -version
  

  will show you its own version.

  See you soon!

• File name associations give up when changing the name of the project

  Post on behalf of a colleague. It uses Robohelp X 5 on a Windows XP computer.
  
  «We have many occasions where we need to take an existing online help (ABC_001, for example) of the project, to make a few changes/additions/omissions and publish a revised draft (ABC_002) online help.» We were cloning the aid project existing (ABC_001), rename the project to make the changes necessary for the aid project, adding or removing map ID in as necessary .hh files, import revised files .hh as needed and then releasing the project under the new name. We want to maintain the assignments and identification card numbers (25ANG1, map #: 640, file name: check the synchronism #25ANG1) ABC_001 to ABC_002, but the file name associations of abandonment when we change the name of the project. So, it is a laborious process to go through the list and reassign all subjects for the appropriate file names. Is it possible to keep the subject labels with their identification card numbers and their associations of name of one project to another file? »
  
  TIA

  My colleague's response:

  "I discovered that it requires just one step more in the project to help until I can see the associations/alias name file again. I have recompile, Colum recommended, but then I have to close RoboHelp and reopen the project. So, if I'm in the project view and access the context-sensitive Help/card Files/All ID card, I see all file name associations. Thank you, Colum, for your help! »

• Error when changing the language of the front panel in Japanese

  Hello world...

  I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encoding (as with normal ASCII coding Japanese texts will not be read). I imported the same file I recorded in a Unicode encoding format. But it shows that the error given below

  "Error analysis during the import of channels
  to test Main.vi
  of D:\Riyas\Work\X 520\28-11-15\X520 RT-Host 20151127\Strings\Test Main_Import 1. txt
  "Saturday, November 28, 2015 11:09:14.

  (See the attached screenshot of error)

  So I tried to import the same file ASCII coding mmee, then it is successful. But the problem is that the modified label is not in Japanese that it shows a few points mark. I'm able to import the channel file saved in ASCII format code but the channel with coding ASCII file will not read Japanese texts. So please help me to solve this problem.

  I need to import a channel file saved with a Unicode encoding or in any case format to enable Japanese texts as ASCII coded format.

  I modified the configuration settings to activate the Unicode format as follows "UseUnicode = TRUE'." I'm using Labview 2014.

  Thank you...

  racahmd wrote:

  My requirement is to change the language of the labels on the front. Is it possible to export the settings of the legend and label parameters separately? Currently, I am only able to export the two together. Also when I import the unicode file that does not contain unicode characters, it shows the same error.

  Perhaps the requirement is statesd as such because the people who wrote the requirement had no idea, you can keep the labels even but change the subtitles only.  Changing labels is a massive effort that could have profound ramifications to the code itself.  Not the same with a legend.

• TSL color does not match HEX, I entered when changing the color of the object.

  Hello world

  
  I change the color of an image. When I type in the HSL numbers (which correspond to the HEXAGON), it's a completely strange color.  I know colors can look different on the screens, but these colors don't look like even those I need. What I am doing wrong?

  -Color I wanted to achieve: HEX #9E223F

  -The converter was told to use: HSL 346, 65: 38

  -The color looks pink rather than the shade of plum, I needed

  -I work in RGB mode because that those are the specs given to me to print.

  This is nothing like as I wanted it. What I've done wrong? I don't know how to fix or get a more desired result. I have need to change article 'pink' in a plum color.

  Thanks for the help everyone!

  

  STL is not the same as the HSB system uses Adobe. There is a mathematical correlation, but it is more easy to Hex to RGB conversion is 1:1. Here are the corresponding coordinates of color.adobe.com: Hex #9E223F = R158 G34 B63 = H346 S78 B62

  

• E-mail is configured to play when changing the selection

  Information system

  MacBook Pro (13-inch Retina, starting in 2015)

  OS X Version of El Capitan 10.11.5

  This is topic: Apple Mail app standard

  Problem

  When I select an email in the standard Apple Mail application, it changes the status of the e-mail message to 'Read' after viewing in preview mode (right pane).

  Then, I need to set it to 'No read' manually, which is quite annoying.

  Question

  Is it possible to change this so that it keeps my "Unread" status of e-mail when you view an e-mail in the preview pane?

  I want to become "read only" if I set to 'Read' manually or open an email by double-clicking.

  For example: it is possible on Microsoft Outlook.

  It's not possible and defeated the purpose of the preview pane.

  On the 3 column display, you can close the preview pane.

  You may be able to create a rule for e-mail or use Apple Script if you want to pursue further.

• When changing the "browser.newtab.url" is there a way to prevent the update address bar?

  When I change "browser.newtab.url" to about: home and open a new tab, focus is set on the address bar, not the search box on the home page of firefox. The same thing happens if I change the url to google.com or another search engine. Is it possible to avoid this.

  This has been fixed in version 14 and more.

• Portege A600 Webcam software crashes when changing the settings with the sound muted

  I have a problem with XP Toshiba factory build for Portege A600 and Portege R600.
  If you try to change the sound properties of the Webcam using the Camera Assistant Software with the sound muted, the camera wizard app will hang & Windows fails to shut down or even stop. The only way to stop is pressed the power button until the machine stops.

  So far, the only solution I can come to is to increase the volume to zero rather than using the mute box. The problem is if you forget and mute rather than turning down and then try to change the sound properties, its "game over." In addition, it is not really satisfactory because politics is to keep the machines muted until the sound is required.

  This does not happen with the Vista Build, build it only XP.

  My guess is that this will not happen on any machine using the Chicony Webcam & software with the Realtek HD audio but I have not tried on machines enough yet to be sure. So far, I've recreated on two A600s and a R600. The machines are not defective and you can create the problem, "straight out of the box. Just do the following:
  (1) use the provided Toshiba product recovery DVD for restore factory Toshiba Windows XP SP2 version
  (2) once you have done the whole stuff, mute
  (3) open the Camera Assistant Software application & to select Properties
  4) click the audio settings tab

  That of all, suspended. The Camera Assistant Software version is 1.7.209.0807L which seems to be the last being available for download on the websites of Toshiba.

  Someone has encountered this or have any suggestions?

  Hello

  I n t have a Portege but U400 with pre-installed and integrated webcam Win XP.
  I installed a clean Win XP and then upgraded the XP to the last State and installed all the drivers available from the Toshiba page and possible.

  I followed the steps in your message and I have to say that I didn t notice strange questions, software webcam still works correctly

  I put t know what could be the problem, but I recommend that you check the audio driver to update maybe you can use the Realtek page
  Also, check if the BIOS has been updated to the current state and if your Windows XP is up to date.

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.