TMS Directory link ISDN paired devices

Similar Questions

• TMS directory failed in the endpoints of series C after the migration of the device to the virtual computer

  Hi all

  We have migrated the 12.8 TMS from the device to the TMS 13.0 on the VM platform. There is no matching TMSPE and mainly used for management and directory service.

  Once the migration is complete on the platform of the VM, we found that endpoint C-series could not receive phonebook of TMS (while 95 MXP endpoints works very well with the TMS directory).

  The end point of series C, we check the Configuration-> directory server 1: URL. The link is converted from http:// /tms/public/external/phonebook/phonebookservice.asmx http:// tms/public/external/phonebook/phonebookservice.asmx.

  (In addition, we check the authorization of the two phone book page, and there is no IIS issue).

  In the 95 MXP endpoint, it can receive the telephone directory unit VM MSD and MSD.

  Best regards

  Ben

  Hi Ben,

  As confirmed by the curl command - you don't have access to the web page as an anonymous user.  You have to fix your permissions.  One of the fastest ways to do would be to try to reinstall the MSDS on the server again - this should reconfigure the IIS settings required for TMS.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• Issue with LINK ISDN and VCS

  Dear Expert

  Link ISDN is capable of working with VCS?

  As I go through the link Cisco TelePresence ISDN administrator guide, he said that endpoint must be registered at VSC when you use the mode ISDN PRI E1 and ISDN BRI Euro type.

  Is that means whenever I want to make a call ISDN with ISDN LINK, I de-register endpoint of VSC on gateway H323 and SIP pox

  Currently my endpoints use VCS as gateway H323 and SIP pox

  Thank you

  Tung

  Hello Tung!

  I wasn't looking for it, but I would say that the Administrator's guide shows just examples, which could

  be configured, not exclusive requirements.

  See the section called "Complete example with an IP infrastructure" and VCS

  In short, endpoint is connected to ISDNlink device and the ISDN link records for VCS.

• Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

  Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

  The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

  Any help is greatly appreciated.

  Hello

  I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
  It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

  Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
  However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
  Guys should more known on own products as simple Toshiba here users in the forum.

  Good luck

• Configure XP mode to link automatically USB devices?

  Is it possible to configure XP mode to link automatically USB devices?

  This is a real nuisance to have to manually set a usb scanner to scan in to an application that does not work on win7 naitively.
  And it makes it impossible to deploy the application in a transparent mode, since the scanner is not attached if you try to run transparently without initiating 'Desktop' mode xp mode and manually attach the scanner first.

  Hi all - I have a solution that works, the only problem is the cost.  USB over network Fabulatech.com, share the USB device using the server component (in the windows box 7) and install the client in the Virtual Machine XP Mode and it will automatically connect at startup of the machine.

  If you need to share the USB device between the computer and the computer/application in XP Mode Windows 7, you can install the USB on the network client on the computer Windows 7 and settled on manual, in order to launch local applications with a CMD file that starts the network client USB key first before opening the application.  This way, the USB devices are available to any devices to connect to via USB on customer network.

  http://www.USB-over-network.com/

• Check if the TMS directory is accessible from codec

  Hi all

  I'm starting a new configuration of telepresence. I have problems with directories. Seems that codec are not even trying to search the TMS directory.

  How can I check if the codec is configured to query the directory TMS?

  In "Advanced-> directory server 1 Configuration" ID has the default value, type MSD and URL to http:///tms/public/external/phonebook/phonebookservice.asmx

  When users press the directory key in remote control no shows, only my Contacts.

  Thank you

  Concerning

  Thanks for the update - the question is usually a proxy or a firewall - your endpoints need to have direct access to port 80 on the box of TMS on the subnet, they are on.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• matching link ISDN question

  Hello

  I have a problem of coupling between sx20 and ISDN connection, the version of the software on sx20 is TC6.3.0.3d8e7d1 and ISDN connection

  IL1.0.0.291516 release of Cisco TelePresence ISDN link,

  Also, I need to know the modem connection, providing ITSPS, I should connect on which port there are 4 ports, s/t, U, telephone1 telephone2 and how many pairs of cable I should do to connect to these ports.

  Thank you

  Hello

  What do you see as you say you have a coupling problem?

  Generally, we recommend to be on IL1.1.0 with TC6.x. here, you will have an automatic matching with the ISDN link. IL1.0 do not have that.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/software/...

  There are instructions on how to update your ISDN link in this document.

  / Magnus

• TMS directory system endpoints source folder

  Hello

  I came across a rather baffling problem with a few cases of TMS and I can't for the life in me know as to why this is happening.

  I get the following.

  in the option for creating source directory Cisco TMS, I create a new directory and link with the MSDS files and select the folder where all the end points, this creates the entries in the phone book for me as I expect with one exception, I will detail below.

  H.323 = [email protected] / * /

  H.323 = [email protected] / * /< this="" is="" where="" the="" issue="">

  IP = IP address

  I find that on some systems (this doesn't happen to all systems) in the second entry of H.323, the H.323 entry where I expect to see the directory (also known as E.164 number) number I see a URI where a field has been added at the end of the number, I'll give you a few examples below.

  DN = 1234

  set field = @video.net

  random field = @newdomain.com

  IP = 10.10.10.1

  I expect to see the following.

  H323 = [email protected] / * /

  H323 = 1234

  IP 10.10.10.1

  but I don't actually see

  H323 = [email protected] / * /

  H323 [email protected] / * /

  IP 10.10.10.1

  I have purged the TMS systems and added, I searched through the xconfig for the NouveauDomaine which is invalid and I can't find anything anywhere other than on the list of areas configured SIP VCS parameters in the second area, endpoints have disabled by default SIP and in both cases I expect to see that under a SIP entry not an H.323 entry

  This is the origin of the problem of when a user tries to call via the Directory site remote also responds to busy VCS is unable to find the appropriate directory number because the location request contains the domain as well as the DN.

  I worked around this by adding a transform to the VCS who sees the patter of specific numbering and the bands of the area, so the calls work, but I still need to understand as to what is causing this behavior.

  If I had to create the directory entries by importing information from the record of the VCS seem to be correct, its only when I try to import the entries of the endpoint via the system folder in TMS (or more exactly to import the information stored in the file on the endpoint system) I see the problem.

  a very popular Adviser.

  See you soon

  Dave

  Hello

  Picked up that the case with David and it seemed that at least on the systems the international denomination on the mxp MXP has been configured. The area of intellectual property also has a configured domain uri that has caused the other symptoms. We where able to erase the questions but still yet to see if the client is actually affected by the same configuration "mistakes".

  / Magnus

  Sent by Cisco Support technique iPhone App

• GSM numbers in the TMS directory

  Hello

  I have AD facility as a source of the telephone directory in TMS for video settings. I'm having a problem where the GSM numbers for users on endpoints TP are appearing as H320 and so the calls fail. I have a VCS/TMS connected to CUCM and want to route mobile calls to CUCM and then get out. Is this possible.

  Thank you!

  Then I was watching your definitions of zone again.

  • TMS needs to know that the endpoint can make H.323/SIP
  • The permissions for the system in the browser from should not be the call blocking options (settings down to change the planning parameters)
  • The endpoint must be associated with a zone of intellectual property with a defined gateway prefix
  • The area of intellectual property must be associated with a correctly configured ISDN zone
  • Route of the directories = yes

  If all this is in place, TMS will be able to deliver to an end point unique h323 call entered ISDN or telephone through the gateway prefixes defined in the area.

  If the entries are not displayed, TMS does not believe he can do a call from the bridge... the lack of supported protocols or failure of registration status.

  You can test this by creating a simple dummy directory with just the vocal entries in it.  Then associate this directory to your endpoint.  If it's an MXP, you can use the web interface of the endpoint to display the directory of the business directory provided by TMS.

  If you can not make it work again, I'd recommend appellant TAC where they can walk through your configuration with you.

• Pavilion Notebook 17-G012NA: Audio uses the laptop speakers and not a paired devices

  I have two devices paired bluetooth connected to my computer laptop, but audio still plays through the built-in speakers of Realtek.

  The device is introduced, my laptop confirms its she paired up and I do not see in the circles where I'm wrong.

  There is no problem with the associated devices because they work brilliantly with my phone and turntable.

  Everyone knows this?

  Thank you

  Hello @RG99,

  Welcome to the HP Support Forum's community!

  I understand your message that your Pavilion laptop - 17-g012na will only play audio through the built-in speakers and not the Bluetooth devices are paired.

  These speakers have worked in the past with this laptop? Have you verified that your system is up-to-date available throughout drivers and software?

  Microsoft has a background paper on connecting devices Bluetooth here and also a document of difficulty connections Bluetooth.

  I know from personal experience that some Bluetooth speakers and other devices, even when it is associated with, should click you on them to connect before it will actually start communicating with the PC.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• Limited to 20 Bluetooth pairing devices

  Hi all

  Our company is currently developing a bluetooth device you need to pair it with a mobile phone (blackberry included) and connect with the phone on a regular basis. The connection is short (only about 20 bytes of data sent) and then the device unplug the phone. It is currently works very well on Android and works well on Blackberry, except for one glaring problem.

  We need to match more than 20 devices to one phone at a time (although a single device must communicate at once) and as far as I know at the moment is not possible because of the 20 aircraft limit.

  Is there a reason for this limit, or is it just an arbitrary number that the developers decided?

  Is there a way to bypass this limit, or is - it possible to have this limit has changed?

  This limit was changed to most recent blackberry platform OS (I currently use OS6 devices) as operating system 7 or Playbook?

  If I could get feedback from some of the blackberry developers that would be greatly appreciated.

  Thank you

  Sean

  The limit of 20 device applies to all BlackBerry Smartphones.  You are not able to increase this limit.

• Synch TMS directory phone book Local Codec

  Hi all

  I was wondering, is it possible to synchronize the TMS (server) directory to the Codec (C20, 40, 60) Local Directory?

  I checked on the guides of the admin and also on this forum, but without success.

  Thanks in advance

  See you soon
  Hugh

  Hi, unfortunately, this is not possible with the c series that it does not support the download directories. The MXP in comparison does not support this.

  / Magnus

  Sent by Cisco Support technique iPhone App

• My SRW2008 'falls' the link to other devices, what to do?

  Hello

  I have a SRW2008 who worked without problem for several years. It is installed as the main switch in my local network.

  Recently, I've enabled the jumbo frames, but regretted and he subsequently invalid.

  During the turn it off, I was asked to click on a webview restart button to restart the switch, which unfortunately resulted in an infinite loop.

  I found a fix online and made as described, connected using serial connection and deleted a file 'config '. Now the button started again.

  Devices, however, do not know if this is a result of resetting, but now the switch removes the link to.

  Usually less than an hour, I can't any traffic through the switch, at least on some ports. If I can still access it on wearing my workstation, I can simply open the Web display, disable the port, on which, I want to connect (out) and and turn it back on. That's all working again. Same result if I unplug the unit on the outgoing port and plug it back. It is simply not acceptable to do 10 times a day.

  The device, which is generally "disconnected" is a ReadyNas NVX. I've seen the same behavior for my workstation-map port switch 5 which is also connected to the SRW2008. The link lights simply turns off on my 5 switch ports, and I have to unplug it and re - plug for a link again.

  It could be a problem caused by delays due to no traffic, or may be related to resetting the config, I have no idea.

  What should I do from here?

  See you soon,.

  -Michael

  Hi ml_cisco_support

  Maybe a long shot and my calleagues may disagree.

  I love the SRW2008, I use a SRW2008P in my applications and would not lose the use of it.

  It might be interesting to perform a software upgrade even with the version currently available code, just to update the operating system in flash memory.

  Then, perform a factory reset to initialize the configuration and records.

  It might be a waste of time, or it might not.  My thoughts are that something got corrupted which can happen to flash memory.

  Just a thought.

  Best regards, Dave

• Hide the warning of record to link ISDN configurations.

  Hey guys, pretty simple question which might not have an answer.

  We set up a bunch of SX20s with ISDN links, and each end by showing "is not (System_Name).

  It seems a little messy and is almost certain to make the user think that there is a fault as soon as the slightest thing goes wrong, like the end does not turn when they try to call or something.

  A way to hide it or the name of system to show strength?

  I hope I'm just something very stupid.

  : D ! Bonus points: how to display the ISDN number entering as appositive on behalf of the ISDN link connected.

  When you are connected with an ISDNLink, endpoint and the link communicate via SIP, so there is no need (if you are not also connected to an IP network) to have H.323 enabled at all.  If you set H.323 to off, it will be also get rid of the message "not registered".

  Just put it to 'direct' If you use it via H.323 independently to make calls over an IP network as well as the ability to use ISDN.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.