TMS don't Upgrade no OpenDS

Similar Questions

• TMS must be upgraded before TMSXE?

  Hi team,

  I don't know if I should post this question here, but I'm running MSD 14.4.0 and TMSXE 4.0 and want to update both. I want to upgrade the 14.6.2 TMS and the TMSXE to 4.1, can someone tell me what I should be upgraded first. I took a glance at the following link and it shows that the TMSXE should be the first. I'm what some confused because the other told me that the TMS must be first of all, if someone can check, thanks. P14

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

  Hello

  According to the TMSXE deployment guide (page 24)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

  You must also pass to the required version of the Cisco MSDS before beginning any installation or upgrade of Cisco TMSXE.

  Manish

  -Does the rate of useful messages-

• TMS 14.1 upgrade error

  Hey all,.

  I was running MSD 14.1 Beta (yes I am part of the EFT) with PE and everything worked fine.  I decided to upgrade to final v14.1 TMS today and now TMS will not talk about PE more.

  I see the following over and over again in the log file - error message tmsagentproxy.txt:

  2012-12-19 10:13:41, 397 [7] WARN Tandberg.TMS.Framework.Proxy.ReverseProxy - lack of demand: http://localhost:8788 / dr/groups/id/b8e3d61c-8567-477b-921b-2cbbe8c181a3

  2012-12-19 10:13:41, 397 [7] ERROR Tandberg.TMS.Framework.Proxy.ReverseProxy -.

  System.Net.WebException: The remote server returned an error: (503) server unavailable.

  to System.Net.HttpWebRequest.GetResponse)

  at Tandberg.TMS.Framework.Proxy.ReverseProxy.ProcessRequest (HttpContext httpContext, dictionary 2 proxyRequestHeaders)

  The TMSAgent service runs & so is the TMSPE service.  Help, please

  Thank you

  Justin

  Ok

  I think I got this one. In this case you see this error because the fact that you named on. You should verify that the named pipes are disabled and TCP ip is enabled (it must be enabled as a Protocol as well (there are two places to enable TCP/IP in SQL Setup))

  The surest way to success is to download the patch:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=963

  Discover this error here:

  Windows Server if using the Protocol of pipes for SQL database connection, the following security

  Windows Server updates/patches are required:

  n Windows Server 2003: http://support.microsoft.com/kb/958687

  n Windows Server 2008 R2: http://support.microsoft.com/kb/2194664 and

  http://support.Microsoft.com/kb/2194664

  Note that the default connection protocol is TCP/IP. If this Protocol is used, no patches are

  Mandatory.

  What I lived, is that even if you enable TCP/IP only and not using named pipes, I always got this error. More secure is to install the hotfix, restart and you should have a moment of "this is" hehe (I hope).

  / Magnus

• SMB works don't upgrade any more after 6.5.0

  After having upgraded my ReadyNas, I can't access any of the SMB shares more.

  I backed up all the data, reinstalling the OS, performed a factory reset and recreated the actions. I also deleted all focus on the NAS Windows ID on my computer, with no result.

  FTP and SSH work fine, I can also join my data through ReadyCloud.

  Hello and thanks JennC, I found the solution: I deleted all entries in netgear in Windows identity management and created a new one with the right credentials. Everything happened instantly thin.

  My actions were all allowed anonymous access, but it was impossible to reach the NAS or french its DNS name or its IP address through. All these operations are now ok.

  Kind regards

  Hans45

• No icons for all act after the vRA 6.2.1 don't Upgrade

  Hello

  After upgrading a vCAC 6.1 existing and functional installation (minimal) to vRA 6.2.1 all the icons for any action (built-in) has replaced by default for resource operations (cafe_default_icon_genericResourceOperation).

  For integrated actions, you aren't able to put personalized icons so how can I get these icons back integrated (Power-On Power-Off, etc..)

  That facing the same issue and it got fixed?

  Greetz

  

  There you go

  Edit: Can not specifically fix the icons, but we have improved and have our icons. (although I noticed in each version, we've been at this icons have tended to be a bit off at times in general... maybe see if another browser works if you have already applied the patch)

  Re: Custom Actions not available after upgrade of vRA 6.2.1

• CC don't upgrade to version 2015

  Hello
  
  We have 4 computers and only 2 updated to version 2015.
  
  Others do not update and generate a 201 error.

  
  

  Please, could someone help me?
  

  Please see below the threads:

  Error 201

  A solution to the error 201 in the installation of Creative Cloud Desktop

  See if that helps.

  Thank you

  Varun

• TMS Migration to new server

  I'm moving our TMS existing 13.2.2 to a new server. One of the first steps is to copy the TMS encryption key. The instructions for doing this are: TMS Tools/Security Settings/encryption code. My problem is that when I open the TMS tools I don't have an option to select security settings. Is this something that is not available in article 13.2.2. If so, how do I find my current 13.2.2 encryption key

  I intend to upgrade to 14.X once the TMS existing 13.2.2 is moved.

  Looking through the TMS 13.2.2 Release Notes, the bottom of pg 3, they removed the option key encryption tools TMS.  Looking at the details of the CSCua72784bug, it is said:

  Encryption keys are not used by Cisco TMS until version 14. The option has no effect in 13.2.x and can be ignored.

  So that you can likely TMS 14.x upgrade and then go through the process of encryption key during the installation.

• What happens if you don't update your icloud?

  wwhat happens if your photos don't upgrade to icloud?

  Do you mean that they don't or are you ask what happens if you don't let them

• Satellite T210-113 - upgrade with WWAN card

  Hello!

  Receinty I bought the laptop ultraportable Toshiba T210-113. I love the device but lacks a level of mobility for me, because there is no preinstalled WWAN card

  With a broadband mobile PHONE (3G or 4G) card, it would be much more convenient to work with this laptop on the road. I hope you can recommend a WWAN card that I can install in my T210-113

  When I detach the battery I can clearly see the slot to insert a SIM card. This isn't just a place to empty or covered with a piece of plastic. The slot that I see has metal parts and seems to be willing to accept real SIM cards

  I heard that Novatel WWAN 3 G cards are preinstalled on some of the predecessors to T210 - T110 series. Could you tell me what card WWAN 3 G / 4G will work with my device?

  Kind regards

  Hey,.

  Normally, such an upgrade should t be a problem if your laptop is a free site for such a WWAN card.

  I think the easiest is in touch with an authorized service provider because you can get spare parts Toshiba of the guys and they know what cards are compatible or not.

  You can find a list here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  If you have done this upgrade, it would be cool if you post comments how it worked, etc. Perhaps with some photos too.
  I have Satellite T230 and also think of such an updated :)

• Satellite A660: After upgrade to Win 8.1 BSOD is displayed using the keyboard

  Dynabook i7 3D laptop A660.

  OK; so I updated my i7 3D Dynabook to form 8.1 Windows (x 64) Windows 7 (x 64), and now the laptop restarts everytime I start to touch the keyboard.

  Other wise works perfectly.

  It took me two hundred hours to understand that I was typing on web sites usually when this re-boot occurs. And I could not remember how or why the computer restarted.

  When I press the numeric keypad 'more' sign, I get the BSoD immediately. But there are a few presses of the numbers on the keyboard so he can do the same thing.

  I.E.
  If I press 1, 2, 3, its ok.
  But
  If I press 1, 2, 3, 4, 5, 6, 7, the laptop gets a BSoD and restarts.

  I also installed automatic software (mouse) for a Microsoft mouse, that I was going to use. and I deleted in the "System Properties" after the problem has arisen; but there is no change.

  Whenever I tap on the number pad (especially the plus sign), the PS stops with a blue screen of death BSoD.

  Any ideas?

  Hi Roger,
  My knowledge the 8.1 Windows isn't supported by Satellite A660 because there is no driver Windows 8.1 special to this series of portable, but even if these drivers have not been released, is not a big problem to install and run the Windows 8.1 on this unit.

  I m wondering how you installed the 8.1 to win on this laptop?
  You upgrade Windows 7 to 8.1 Win or were you running a fresh install of Win 8.1?

  Here's a nice page of Microsoft providing some FAQ about update for Windows 8.1
  [Windows 8.1 update: FAQ | http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8]

  In case you have done an UPGRADE to 8.1 Win, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

  I would be also interesting to know if the same BSOD would appear if external keyboard would be connected to the laptop.
  When using the external keyboard would cause NOT of BSOD, I guess internal keyboard is faulty and could be the troublemaker.

• NB550d - Ram or Ram & OS upgrade?

  Hi - I had a netbook nb550d & generally fun but I would like to improve performance. Plans is just an upgrade to 2 GB ram & leaving with windows 7 edition starter or go to 4 GB ram & upgrading of windows 7 Edition family, but the latter would cost at least £70 more & I was wondering if it is worth. Seen also some comments re autonomy, reducing the latter but don't know why?

  I'm not bothered by the limits as office & have managed to overcome the problems of reading of DVD of W7starter but want the base system to run faster. Has anyone done one upgrade & there was a significant improvement?

  Separately if I upgrade the operating system do I need to reinstall the programs etc?

  Thank you

  I put t have this little netbook, but if you are satisfied with the BONE and so pre-installed OS is good enough for all your needs, in my opinion, upgrade of RAM is sufficient for you.
  It will definitely increase the performance of netbook s.

  In the case it will be good enough for you, you can upgrade the operating system.

• Qosmio G40 - upgrade memory to 4 GB

  Dear all,

  I want to upgrade my memory standard 2 GB (2x1GB, 667 Mhz) up to 4 GB. Clearly, I realize that only 3 GB (or something around) will be visible.

  * The question is choose what type RAM os and which brands/models best fit (price and performance-wise) *:
  (a) PC2-6400 800 Mhz
  (b) PC2-5300 667 Mhz

  _Would the system use PC2-6400 800 Mhz or could it be underclocked? _
  I read this thread (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28634) and seems that the part of the wire on underclocking has not been addressed.
  Does make sence buy PC2-6400 with a hope that with increased Mhz, performance will improve?

  There is a list of RAM tested brands/models and confirmed as compatible by Toshiba for purposes of upgrade? _
  The manual indicates that only authorized Toshiba RAM should be used, but I failed to find a list of approved... The RAM manufacturers offer different ideas (Kingston suggests PC2-5300, Corsair suggests PC2-6400), but I'd rather hear Tohsiba.

  * I would be grateful to hear from those who have done an upgrade if there is no improvement in performance! *

  Thank you all,.

  I can see in the last 5 days nobody have written anything, and I hope that I can offer just my comment to this. To be clear I have no Qosmio G40 but I hope we can discuss on the upgrade of RAM.
  That said Toshiba? Not much.

  For each model of laptop, Toshiba offers a list of compatible and tested RAM modules. For your computer model Toshiba laptop offers modules of DDR2 667 MHz RAM. 2 GB module has PA3513U-1M2G part number. I also recommend you to buy Kingston modules. Kingston offers products of high quality.
  I don't see any reason why Toshiba should test all the modules available on the market and create a list. If someone will sell own products, they must test it with laptops available on the market and have a good chance to sell own products.

  As I wrote before RAM in the manuals is being tested. To be honest I don't see any sense why use module 800 MHz on the motherboard with bus 667 MHz front end, if you can get the 667 MHz modules.
  What do you think?

  One last thing: to comment on this notebook 800 MHz just processor system Bus Clock speed (PSB) is 800 MHz.

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite A500 PSAM3E - Windows 7 upgrade failed - error code: 0 x 80070570

  I install the win7 update on my Satellite A500 PSAM3E and when I arrive in windows files is growing - it stop and a pop-up message:

  * (Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070570). *

  Stop the installation and I could do nothing, I restarted the upgrade but still the same.

  I just got my win7 DVD from Toshiba, the corrupt DVD upgrade or other issues, before the installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.

  Need help from the expert who have already done the upgrade.

  Hello

  > before installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.
  And why you didn t do?
  Maybe you run an earlier version of the display drivers and so you should uninstall them before you start the upgrade.
  Check it!

  After the upgrade, you can install the latest version of the Toshiba page display driver.

  By the way: Here you can find an update step by step:
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm

• HP Pavilion DV7t-4100: dv7t-4100 processor upgrade

  I have my laptop processor ugpraded: DV7t-4100 according to the spefications of the manual.  The model is a DV7T-4100 with a product # WW189AV.   I upgraded to a intel i5 - 460 m to Intel Core i7-840QM processor.  Unfortunately, although the manual says compatibility with this computer model I can't the computer to turn on.  I am a computer programmer and have replaced many before processors on a laptop and this has questioning me the validity of Manual HP.  In fact in the same manual, he said that the computer is not compatible with 16 GB of ram, however, a user on the Board discovered that you can upgrade the processor and in turn, you can then upgrade the maximum authorized place 32 GB memory live.

  A little frustrated at getting no results even after spending all that money on a new processor.  As of this moment with ram old or new ram the computer simply not starts with the new i7 840QM.

  I am aware of the pdf file: http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf and page 11 States that the 840qm works for 4000 series to 4299 so I thought it would have worked.  Please let me know o ' wise HP support or maybe someone else who happens have experience about it, I'm stressed out that I might have to return all the parts of my.

  This Forum is still open and available for upgrade issues. We do not work for HP but most of us is passionate about. I will just repeat that these textbooks are not written with the idea that HP is somehow what can be done to upgrade the laptop processors. He was always a gamble, and I always try to tell people that.