TMS upgrade, the OS and DB Migration

Similar Questions

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

  Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

  What did you find?  Was it a 8 GB module?  Two modules of 8 GB is the MAXIMUM.

  Yes, this is why I suggested the part numbers.  You have to match pairs.

• I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

  I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

  AM2 are listed here:

  http://support.HP.com/us-en/document/c00714578

• Upgrade the processor and the memory of SX280

  Hello

  I have OptiPlex SX280 bought 3 years ago

  which has Intel Pentium 4 530 memory and 2 GB.

  Given that I need to solve a problem of Supercomputing,

  I want to upgrade the processor and the memory instead of replace the computer.

  SX280 works with CPU Core2Duo E8200 having the same type of brooch (LGA775)

  and 4GByte momory?

  The SX280 BIOS is A09.

  Hope to hear a response.

  Thanks in advance.

  Message edited by yongminc on 10/19/2008 21:18
  
  

• Satellite A500 - upgrade the processor and RAM void my warranty?

  I have a Toshiba Satellite A500, and I think to upgrade my processor CPU and RAM. If I open it invalidate or do I need a Toshiba authority to open it? Removes the card RAM will void the warranty?

  All I need to know is that can I put RAM and CPU processor without voiding the warranty

  Hey,.

  If you upgrade the CPU, you will cancel the warranty because this upgrade is not supported from Toshiba.
  In addition, I put t understand why you buy a laptop, and then you think of some hardware upgrades. In your case, I'd rather bought a laptop with faster processor and more RAM.

  See also this article from Toshiba:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://APS2.Toshiba-tro.de/KB0/TSB9401AX0001R01.htm]

  Finally and above all a RAM upgrade is not a problem. So check your user manual how to do this.

• Satellite 2800-200; is it possible to upgrade the memory and HARD drive capacity

  Hi all

  my computer is a Toshiba Satellite S2800-200 (old) and I wont to ask if it is possible to upgrade memory capacity and disk.

  Thank you

  Of course you can upgrade these laptop parts.
  The laptop seems to be equipped with an internal memory which is not removable.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7168&ft=m&St=3
  According to the website above, you can use only one memory for an upgrade slot.
  You can use the 144-Pin PC100 SODIMM 128 MB module. It's max.

  I m not 100% sure on the HARD drive, but as I m not trunk not the laptop came with 10 GB HARD drive. Generally, a 20 GB HARD drive should be possible.

  Good bye

• HP 15-AB031TX: upgrade the OS and recovery

  I purchased the above model from Amazon, and it was delivered to me yesterday. Here are my questions:

  1. I'm eligible for upgrade to Windows 10?
  2. If I switch to Windows 10, will be the recovery partition that was created by default, become redundant?
  3. Where is my Windows key?
  4. In the case of reformatting the system, I should install Windows 8.1, use his key and then upgrade to Windows 10 or I can install directly Windows 10?
  5. The package did not have any Driver disk then should I download separately to the exegencies of the future?
  6. This everything is covered by the standard warranty?

  Also the foregoing asked, basically I want to know how much I have to tinker with the system without invalidate its guarantee of flexibility.

  @RudyP51:

  (1) everyone is "eligible" for the upgrade of Win10 because MS is pushing it for free.  IF what you're asking, is if your machine is compatible with Win10, you can check by entering the number on this page: Confirm upgrade to Windows 10 | HP® Official Site

  I did and it returns the information that it has NOT been tested by HP, but this is strange, because your PC has Win10 drivers of HP: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-15-Notebook-PC-series/7771366/model/7919378#Z7_3054ICK0KGTE30AQO5O3KA30R1

  So my best guess is that it IS compatible.

  (2) the recovery partition, after the upgrade of Win10, is not redundant, it is useless.  Which is set up to do a restore to your original operating system, and once that is replaced, this will not work because the Win10 upgrade corrupts and in some cases, removes, the recovery partitions OEM, rendering useless HP Recovery Manager.

  (3) your Windows product key is embedded in the UEFI firmware on the motherboard.  For this reason, some COA stickers are printed with product keys more.

  (4) the Win10 update, unlike previous versions of Windows, does NOT allow you to enter a product key for activation; Instead, it reuses the existing product key.  Once Win10 has been activated on a PC, it is then registered with the Activation of MS servers, and you can reinstall Win10 to the same machine without having to repeat the upgrade.

  (5) If you want to save your drivers, I personally recommend a product called Driver Backup.  This allows you to save on ALL your current drivers to a set of files.  IF you copy this set of folders on a USB key, you now have a way to reinstall the drivers when you want to.  I use it and it works great!

  (6) I'm sorry, not a person of the guarantee and can not speak to Suggest HP. you contact HP customer support.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  One last thing...

  As GoBack to Win10 function has been proven to be unreliable, when people are trying to return to an earlier OS when it does not work, cannot leave the machine in a corrupt State, such that only a full factory reset HP recovery support it will get back to a working condition , and not only you have to buy only media, you end up losing all your data, settings, and applications in the process.
  
  However, you can protect yourself from this kind of problems if, BEFORE you do that, you consider using a third-party application Imaging/restoration as Macrium Reflect to image your machine off, so you can easily restore it if something does not work.  And don't count on the Win10 GoBack function back on Win7, it is not reliable and can leave your computer in a damaged state.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  Have fun experimenting with Win10!

• Satellite L655 - 14 d - upgrade the RAM and sound card

  I have the Satellite L655 - 14 d there 3 GB RAM, I would like to know if I can upgrade the RAM if yes how? I would also like to know if I can add a card his 5.1 or 7.1 internally or externally without problem.

  Help, please

  Hello

  Sound chip is part of the mobo. Impossible to upgrade this or replace this part.
  You can use an external sound card, but I put t know how it will work in your laptop.

  Regarding the upgrade of RAM;
  Yes, you can upgrade the RAM.
  Check the user manual and extra, you can consult this section of the forum:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=114

• HP laptop - 15-r150sa (ENERG: I want to upgrade the processor and the RAM of my laptop HP)

  I have a requirement for a high quality laptop computer.  I want to at least 16 GB of RAM and Intel i7 processor. Can I improve/replace the newly purchased on my laptop i5 to i7 processor and 6 GB to 16 GB RAM?

  Emergency response please.

  The processor is part of the motherboard. To get a faster processor, it requires the replacement of the whole motherboard.

  Processor Intel Core i7-5500U and 2 GB cards separate graphics 795814-501

  Above is the part number. This part is new and rare and can only be in HP. At this moment, they are not available. I did a complete search on the internet and it does not appear in one of the parts houses so likely you will have to wait a few months for the part joining the supply chain. When it doesn't the price will shock you. As at least $300US, maybe more.

  The RAM is available anywhere. Like this:

  http://www.eBay.co.UK/ITM/2x-8gb-16GB-DDR3L-1600-MHz-RAM-memory-HP-mobile-Workstat-Zbook-17-PC3L-12800S-/191493216820?PT=LH_DefaultDomain_0&hash=item2c95e29a34

  Upgrade memory requires the removal of the motherboard so it would be foolish to do until you are ready to do all the work.

  May I ask why if you need a super-powerful laptop just purchased a kind of average lower of the spectrum? It's always much more expensive try to upgrade a cheap laptop computer than to just buy a high-end establishment at first. It would probably be you will have to return or to sell your laptop and buy a new one with the features you need.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• WLC4402 - Questions to upgrade the AP and controller

  Hello

  I just upgraded an AIR-WLC4402-12-K9 to version 7.0.98.0 of the software, and I have a few questions-

  1. I have no APs to connect yet but when I do I'll have to check what software they run and perhaps demote the controller to get access up to v7 points?  To join the WLC v7 since v3.2 I had to make a few intermediate upgrades and I wonder if I have been a little premature and should have done updates after the APs have been associated, has new software pushed from the controller and then performed the steps in upgrade of WLC so the WLC and APs were synchronized in terms of software.

  2 - the memory usage is sitting at 60% with no associated APs.  I have just connected 4402-12 running 5.1.151.0 and he's sitting at 33% use of memory with associated access 11 points.  Have I spent in a too recent version for this controller?  What is a figure of the memory use of a 4402?

  Thanks in advance,

  Jason.

  Jason,

  A question.  You should be fine.  When the AP detects the WLC, it will do a code audit.  If this isn't the right code, it can extract the correct image of the WLC.  As long as the AP you are supported in 7.0, the recovery on the access point image won't matter.

  For question 2.  sounds of 60% of normal for 7.0, depending on the amount of memory is on the device itself.  I woulnd't ' t be too concerned about the memory usage until you points upward in the high 80 years.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

  Operaring system: Windows 7 64-bit

  CPU: Core i5-2500, 3.3 GHz

  Memory: 10 GB

  Video graphics card: GeForce GT 420 - OEM

  Hard drive: 1 TB

  Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

  Power supply: power supply 300W

  Several features of the product: HP Pavilion Elite HPE-510 t

  due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

  GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

  GPU size: 9 "x 4.4"

  Power supply: Antec High Current Gamer HCG-750 750W Series

  "Power supply Dimensions: 7.1"x 5.9"x 3.4"

  I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

  Thank you

  The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

  Frank

• 2015 to upgrade the scripts and plugins lost

  I can't find the adobe applications after the upgrade. Not in my applications folder. I'm on a Mac Pro. Lost plugins and scripts as well. I don't know even where to put them. I am very disappointed by Adobe. The update even wiped my old installation to work. Any help would be appreciated. Apps launch, but only from my App creative cloud do not want to have to reinstall everything because its very time consuming and time are $. Help me I'm on a deadline.

  jamesg91235569 wrote:

  When I did the install it says it was an update of 2015 and not install a complete 2016 updated version I did a whole. I never do complete a version update unless proven.

  You're not the only person to think that. I heard of many others on this subject. If I could find any Adobe management decided to go this route with the name (and have default CC for the removal of old versions), I give them a piece of my mind, bless their hearts.

  You can't even find the old plugin files, right? Heck.

  You could simply install your plugins and scripts again and not worry about the old AE versions unless you hit a bug or something. I really like AE 13.8 (AKA AE CC 2015.3) despite its clumsy name.

• When I leave firefox update to 17.0.1 iheart radio has stopped working. I upgraded the flash and the media player, no joy. OS x 10.8.

  iHeart has nothing on their forum about this.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• HP Envy m6 1125dx: how to upgrade the bios and uefi without a hard drive

  I can't install OS, including Windows 8.1 discs. After that I get so far along, installing Windows says there is no hard drive, but it's there!

  I see that my BIOS is outdated. When I download the new BIOS from hp.com, I get an executable file

  which of course does not work on a computer that does not start. I can't find the bios file when I run

  the executable file on another laptop.

  So, I want to update bios and uefi to see if that helps with my problem.

  The current Bios is F.11

  Fred

  oakman2 wrote:

  SP66782.exe is what I get when I download from the HP web site. It is a windows executable that updates the

  The BIOS on the computer that runs it.

  I don't think it will run without windows is also running.

  Quite true.

  See the image below.

  What is necessary to do is to extract the sp66782.exe file to a folder on the second computer.

  Rename A 018, 4. FD file to 018 has 4. BIN and save it to the root of the USB stick.

  Plug the key into a port on the computer laptop problem.

  Press the power button / stop the laptop and immediately press and hold the Windows key and the B key until the phone reacts and starts the BIOS recovery.

  If all goes well, that will recover the BIOS corrupted with the new copy which is on the flash drive.

  There is a detailed description of another method to do this on the thread of the forum according to 3rd party.

  https://www.BIOS-mods.com/forum/thread-success-solved-semi-bricked-a-HP-DV6-3225dx

  Using this method will result in certain risks that you have to accept if you decide to follow this way to unbrick your laptop. Any update of the BIOS manually is risky.