SPA3102 VOIP router reset randomly

Similar Questions

• The Apple 2 Configurator - iPads reset randomly

  Hello, I recently setup one set up 43 Mini 2 iPad using Apple Configurator 2. It is a pain in itself but I have finally all the settings and I work as they wanted.

  Since then, a nightmare began to fall apart. Ipads have decided to get back at random, at different times and are on-screen apple 'start '. Thus wiping all my small a pre configured options. The common message I received is that they worked all day, then put on fees / locked screen. They returned to the iPad and it has somehow restarts.

  I tried to find out why this happens, but find it very difficult, the possible answers are:

  1. Code entered incorrectly too many times triggering own iPad outside
  2. An update from apple is "accepted" by the user, downloaded in the background then installed when they were not using it. Release of the iPad to wipe himself.
     This could explain reset randomly, the amount of time needed to download the software update can be faster / slower on some devices. There was a report saying the site I pre-installed ran really slow... it could have been because of the download.
  3. Hardware problem

  Unfortunately, that's all I can offer, my gut says the update it the cause of this. But an update shouldn't wipe all my preconfigured information if it's in a supervised State. I'm almost 100% sure I ticked the option do not allow updates... maybe I'm wrong.

  Just a side note, I downloaded and updated all iPads to the latest iOS, before they were sent out (that was last Friday).

  Everyone knows this?

  Same problem here with the iPhones.

  Started deployment becomes a big batch of iPhones and many have started to return to the start screen.

  First of all, I thought it was matter of iPhone 4S. Then did their setup differently, always the same thing.

  Watching began in our mdm Airwatch server settings, have not found anything that could have an impact on it.

  A common thing - iPhones reset after that pin code has been entered incorrectly. And it began to appear on the new phones too.

  Today, I finally asked. Apparently, this is the profile of restrictions that we apply. Jump restrictions blueprint - iPhones work very well.

  will dig deeper into this more later this week and see what restrictions cause it...

• Cisco router restarts randomly with Bus error

  Cisco router restarts randomly with the following error:

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  I've pasted below see the chimneys and release the version.

  view the stacks

  
  

  Minimum factory chimneys:

  Format name / free

  5396/6000 inspect Init Msg

  Subsystem SPAN 5368/6000

  58920/60000 EEM Auto record Proc

  Automatic start of 4772/6000 upgrade process

  DIB 5164/6000 error message

  HAND OF SASL 5396/6000

  4968/6000 LICENSE DEFAULT AGENT

  5368/12000 Init

  4216/6000 update prst

  4384/6000 VPN_HW_MIB_CREATION

  5188/6000 RADIUS INITCONFIG

  Update process random rom 2128/3000

  8356/12000 SSH process

  Stats URPF 5316/6000

  Interruption of battery level:

  Level named format / unused

  Network interfaces 1 1484828 6284/9000

  2 3264990 8548/9000 DMA/Timer Interrupt

  3 1 8388/9000 PA Int management Manager

  Console 4 115 8612/9000 Uart

  External interrupt 5 0 9000/9000

  NMI 7 223352 8564/9000 interrupt handler

  Spurious interrupts: 11

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  Software of 2800 (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  Image text-base: 0 x 40011240, database: 0x42B41940

  The failure of the system stack trace:

  FP: 0X472252B8, RA: 0X4183614C

  FP: 0 X 47225310, RA: 0X418312F8

  FP: 0 X 47225348, RA: 0X41647DC0

  FP: 0X472253A8, RA: 0X4164A8F4

  FP: 0 X 47225428, RA: 0X4164B248

  See the version

  
  

  Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2009 by Cisco Systems, Inc.

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  ROM: System Bootstrap, Version 12.4 (1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

  availability of Cisco is 28 minutes

  System returned to ROM by bus to the 0x4183614C PC error, address 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  System image file is "flash: c2800nm-advsecurityk9 - mz.124 - 24.T.bin".

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Cisco 2821 (revision 53.51) with 1036288K / 12288K bytes of memory.

  Card processor ID FCZ1017732F

  2 gigabit Ethernet interfaces

  2 modules of virtual private network (VPN)

  Configuration of DRAM is wide with parity 64-bit capable.

  239K bytes of non-volatile configuration memory.

  250880K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 2102

  You want to use the tool interpreter of output for this work:

  http://www.Cisco.com/pcgi-bin/support/OutputInterpreter/home.p

  For more information about the resolution of crashes, see this article:

  http://www.Cisco.com/en/us/products/HW/IAD/ps397/products_tech_note09186a00800b4447.shtml

  In this case, it looks like CSCsy09250, described here:

  http://www.Cisco.com/en/us/products/CSA/Cisco-SA-20100324-SCCP.html

  You should contact Cisco for the software updated by following the instructions of this bulletin.

  That crash possibly caused by part of sone intentionally sends out packets malformed to your device, so if you have reason to believe that someone in your community could run metasploit or similar "Penetration Testing" tools, you can look into that as well.

• Stand-alone voip router configuration

  Hello

  I'm pretty new to the part of Cisco's IPT. I am planning to buy a Voip router, but don't know if I want it is possible. See the attachment for the installation I plan on the building.

  Cisco 881 must register with the VOIP provider. A phone number is online in this way. Also, is there a PSTN line in the House with a different number.

  Calls from the phone in the outgoing House should use the VOIP line, unless it is down, then they must be routed to the PSTN line.

  Outgoing fax calls must use the PSTN line.

  Incoming calls on the PSTN line must be routed to the fax machine.

  Incoming calls on the VOIP line should go to phone home.

  Is it possible (independent) without any additional software/servers?

  Thanks for the help!

  It depends on what you want to learn. You will be probably able to do any transcoding or conferences on this amount of DSP.

  So a 1751-V is going to be limited to 12.4 (15) T and earlier versions and will not have access to the new features of 12.4 (20) T or later.

  As much as to plug an analog phone, connect a line from your provider and the registration of some IP phones that should be all you need.

  I would plug the cards into the DSP calculator to do what it can run 4 FXO/FXS ports you want to put in the router.

  HTH,

  Nick

• I need to keep my router reset

  Hi, I've recently migrated from Vista to Windows 7 on my main computer [Dell].  I have a router Netgear [DG834G v5] who always works with the Dell Vista and still works well with the other two computers [Satellite from Toshiba and Fujitsu Lifebook] who are the two runing XP.  At random intervals I lose connectivity to the internet, although Windows 7 sees the router, which continues to work with the other two PCs.  The only solution I found is to reset the router which is a complete pain.

  I hope someone can help please?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about your connection problems in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• WRT54G2 wireless router disconnects randomly

  I have a Linksys router and a modem provided by Charter Communications WRT54G2. Sometimes when I'm on the internet or someone is playing games online, the connection will be randomly fizzle out for half an hour at some of them. It says its connected and reset the router doesn't fix it. We must just sit and wait. Is there something wrong with the router? How can I solve this problem?

  If your account intermittent connection, try updating the firmware on the router first, then check the connection.

  1. go to www.linksys.com/downloads

  2. type in the model number of your router

  3. choose Get downloads

  4. Select the Version of your router device

  Under the router next to the model number: WRT54G2 v1

  5. then download the firmware on your router

  6. Access UI

  7 return to the Administration

  8. Select Firmware update

  9. update the Firmware

• 10 IOS resets randomly

  I use an iPhone 6 + and I recently updated to iOS 10.

  Since the update, restart my iPhone randomly 'fast '.

  I use an app, the screen will turn black with a white spinning circle in the middle of the screen for about 3-4 seconds and then the phone will be asked to enter my unlock code.

  It seems random, however, I was able to find a reproducible process which is described below:

  • Click on an in-app purchase
  • Put in password Apple
  • phone prompted me to check the payment
  • Go to the payment screen, start entering details, the phone would reset

  The time taken to reset using these various steps, he was not always exactly in the same place and of course it happens to do other things as well.

  I noticed a few others similar problems to do a quick search on Google.

  Someone at - he found a solution to this?

  My next step would be to restore a previous backup and start the upgrade process again.

  Hi Drakon73!

  I see that your iPhone restarts unexpectedly.  I know it's important to have your iPhone works properly, and I'm happy to help.  Please make sure that your iPhone is up-to-date by going to settings > general > software update and also ensure that your applications are up to date on the App Store.  You will see that those are both recommended in our support for this issue.

  If your iOS device restarts and displays the Apple logo or a gear in an unexpected way

  Thank you for using communities of Apple Support.

  See you soon!

• Satellite A200 (PSAF6A) resets randomly

  Hello

  I have a problem with my Satellite A200 (PSAF6A) randomly resetting itself. It does not matter what job I do, or how long I let the laptop, it will be just black screen on me and reboot. Sometimes he'll do Mid-when the form starts, other times I can use it for a while before he'll do. It seems to be a problem which intensified during some time, occurring initially quite rarely, which is now so frequently that it makes the phone unusable.

  This issue seems to happen mostly when running off the AC power. When you use the battery I have minimal problems, until the battery runs out. Although stability is much higher when you use the battery, I can't confirm that AC is actually the cause of the problem, because it is a random problem and I will sometimes use alternating current for a long time without error.

  I can say that the problem is not caused by overheating or drivers/software/OS. The laptop has been maintained to be free of all dust blocking the radiator as well as for a new application of thermal grease for NB and CPU chips. Everything is running at the level of the standard factory.
  I tried Linux, XP, Vista, Win7 and can tell it seems to be a problem specific to an operating system or driver (he got the problem when no OS has been loaded yet).

  If anyone has had similar problems or knows what could be my problem, your help would be greatly appreciated.

  Zedski

  Hello!

  Did you try it with the factory settings? I mean the version preinstalled Windows that you can restore it with the Toshiba recovery disc. This disc contains all of the drivers and tools and with these settings, everything should work fine.

  Good bye

• 2540 HP all-in-one printer print by wifi only works after the router reset every time

  Hi, I recently bought a HP2540 all-in-one printer.

  I was unable to get the printer to work via wifi after trying lots of different things, but after rebooting the router and try again, it worked perfectly.

  However, it seems that whenever I'm away from the computer (or turn printer work) it will not print. However, as soon as I restart the router again it works perfectly. I guess it's something to do with the IP reset maybe, but would be unsure how to proceed?

  Thank you

  Bret

  Hey @BrentBWood,

  Thank you for contacting HP Support of Forums!

  I understand you're having intermittent problems of wireless communication with your HP all-in-one Deskjet 2540. I want to help you resolve this issue today!
  
  Because the problem seems to be fixed after you powercycle router it certainly seems to be a problem of ports with the router itself. This does not indicate that something is not actually with the router. It simply means that the router is doing its job too well and block the printer intermittently as a threat attempts to access your network.

  For your reference, I'll provide you with the support document HP on wireless connection problems. You already have the reset of the router so don't worry too much about those, but the other steps can help solve this problem for you:

  Printer keeps no connection Wi - Fi

  If these steps don't are still not solved the problem I recommend you talk to your router manufacturer to get them to open the appropriate printer ports.

  -Incoming (UDP) Ports:

• A solution for cache reset randomly in Windows 8/8.1

  After, I scream with a reset of the cache random ExpressCache in point 8.1 of Windows. Now, I found a solution for this problem.

  Just disable fast start of Windows 8/8.1. Solved!

  (Dashboard-> hardware and sound-> Power Options-> choose what buttons to-> change settings that don't are currently not available-> turn off the quick-start-> save changes)

  I think that because quick start feature in Windows 8/8.1 is not a full stop (they call hybrid sleep). Thus, ExpressCache confuse maybe on the power stage when you shut down your computer and try again you OS.

  Here is a quick start function information in Windows 8/8.1

  http://blogs.msdn.com/b/B8/archive/2011/09/08/delivering-fast-boot-times-in-Windows-8.aspx

  Hope this solution can solve your problem and sorry for my bad jurisdiction English.

  It works 100% for me so far. I turned off Win 8.1 quick start and now the cache is not reset at each stop.

• Loss of internet connectivity after the modem / router reset

  I have a BEFSX41V2 and a Motorola SB6141 DOCSIS 3.0 modem.  My provider is comcast.  After all devices reset, unplug the power and remove the cable / ethernet cable, I lose all access to the outside.

  The strange thing is that if I connect any desktop or laptop computer at home directly to the modem, I have access.  In this case, the link for the transmission light / receipt of data on the modem is on.

  I had to send signals of reset comcast several times but it does not solve the problem when the modem and the router BEFSX41V2 are connected.  In this case, the link for the transmission light / receipt of data on the modem is turned off.

  Are there additional steps I must take on the router to reactivate the connectivity.

  Thank you.

  George

  Have you tried to do a hard reset to the router and then reinstall parameters later? To do the reset, please press the reset button at the back of the router for 30 seconds while the unit is turned on. After unplugging and then start from scratch. You can check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=fccaaff524a24bc9a08172ea696f8ed1_4737.xml&pid=80&r...

• Transfer to PSTN calls on the SPA3102 VOIP does not work with voip providers who do not proxy outbond

  I use the SPA3102 to transmit calls from PSTN to Voip network. Work very well with a local Voip provider calls Vono (www.vono.net.br), I think that this provider is the one who has the outgoing proxy. However, I would like to use the SPA3102 forwardin PSTN calls with other providers such as Freevoipdeal, VoipWise, VoipRaider etc... These suppliers have no outbound proxy. How can I get around this? According to the link below, you need to plan an outbound proxy. What should do?

  http://www.Cisco.com/en/us/products/ps10024/products_qanda_item09186a0080a359ae.shtml#q

  For example, freevoipdeal voip provider guides that leave the field blank outgoing proxy as below.

  https://www.freevoipdeal.com/SIP

  You can leave the outgoing Proxy field blank.  You do not have to have an entry in this field for the SPA3012 works correctly.

• WRT320N router resets the default wireless settings after a while

  I wonder if someone can help me. My router automatically assigns the initial default wireless network settings.

  Sometimes after an hour, sometimes after a week.

  It reverts to automatic instead of the manulal settings that I use for the configuration.

  Replaces the Linksys SSID and disable wireless security.

  What I am doing wrong?

  Try to reflash/upgrade of the firmware on the router and see if that helps. Follow the steps described in the section below to download and update the firmware.

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=93&login=1&VW=1&app=search&articleid=4030&userrole=Linksy...

• Power Options and reset randomly sleep mode settings.

  It turns out that windows 7 will change ALL its parameters of power in itself! I'll let him sleep a few nights, come home and wake up... only to see my login screen. (I have the normally disabled option in power options). But all my work is always there, so the machine does not restart (or turn off and just resume hybrids) is for sure in s3. Power options check and everything is set crazy, not all back to the default values for either.

  I'm running Windows 7 x 64 Home Premium. This becomes extremely annoying to say the least... Can settle us this?

  ~ MG ~.

  * Edit * I wanted to add that what happens on 4 computers in my friends home even. 2 desktop and 2 laptop computers and all are supported by a Windows Home Server all running windows 7 x 64 home.

  Thank you dewbert I've found that if I go to the command prompt by using 'powercfg' I was able to turn off all the power settings (I like mine to be always running until I want to turn off without exception) I disabled standby, hibernation and set to never turn off monitor and several other parameters. Here is a link to these parameters and so far no more problem.

  https://StackOverflow.com/questions/254066/turn-off-power-saving-options-via-command-line/258777#258777?newreg=dbb749a44ed54e43bdc8c5da48ead67d

  was one of the first things I did with my pc to get rid of norton delivered pre-installed (bitdefender I don't know) and use microshaft security essentials (mse) with no problem more his light and does all these pop-ups as avira and others. also, I went to the ms updates and set it to download, but let me decide when to install and for updates of device, I put that let me decide because I had that feature really get in the way to install things like the new graphics drivers, kept dang thing beat me to the punch!

• Linksys spa3102, unable to connect to the web-based utility.

  I have a problem... try to configure my spa3102 voip router, I can't connect you to the basic utility web (192.168.0.1/admin/advanced) page that he asked me to in the installation guide.

  a reapears of error "404-File not found" every time.

  Help, please

  first of all, make sure that your computer is connected to the LAN port on the back of the SPA3102 - then, click Start > run > type cmd > click OK > type ipconfig > hit Enter - glance to the DEFAULT GATEWAY - use to access the web interface of the SPA3102

  ex. If the default gateway as 192.168.1.1 type http://192.168.1.1 in the address bar of your IE - you can then click admin on the upper right of the screen and then click on advanced, also on the upper right of the screen

  * Sometimes the IP address of SPa3102 changes to a different address, especially if the device when you connect the WAN port has the same IP address which is 192.168.0.1