TMS Video Conference MAster API commands

Similar Questions

• SX80 simultanius video conference

  Hi all, I have a question made media sx80 multiple videoconferences at the same time, for example, if my client wants 2 video conference independent of each other, the sx80 does very well. also without CallControl

  Video input camera--> Room1

  Video output--> Room1

  Audio--> Room1

  Audio--> Room1

  Video input camera--> Room2

  Video output--> Room2

  Audio--> Room2

  Audio--> Room2

  The SX80, like any other video conferencing end point (and regardless of manufacturing), may not pysically connected to a room at a time.  Cannot connect a single codec in several rooms, each with their own camera and microphones and have individual conferences for each room.  Your only option if you want each piece to be able to make Conference calls independent of each other is purchase and SX80 for each room or share the unique SX80 allowing only when using it.

• EXTERNAL VIDEO CONFERENCE DROP AFTER SECONDS

  Salvation;

  I have a MSD 15.3.0 version and TMSXE 5.3,
  I have a wooded area, with:
  10.5.2.10000 - 5 CUCM
  PRESENCE 10.5.2.21900 - 4
  TMSPE: 1.7
  CONDUCTOR: 4.2
  NŒUDS EXPRESSAY: 8.6 (EXP-E clusters and cluster EXP - C)
  TELEPRESENCE SERVER: 4.2 (4.23)

  Salvation;

  When I create a new video conference using the SCHEDULER INTELLIGENT or CMR, an external user cannot stay in a conference, this connection is dropped after every seconds.  In my vts newspapers exist the message below, where information this close due failure invitations SIP call.

  274 2016/09/12 16:47:47.768 SIP Info call 10.254.0.30:42033
  "" 16:47:47.771 275 2016/09/12 call APP Info 21: incoming new SIP call of '[email protected] / * /"
  276 2016/09/12 16:47:47.953 calling APP Info 21: "FABIO 2s" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  277 2016/09/12 16:48:09.340 calling APP Info 21: stopped contributing video, now contribute audio only
  Time from NTP Info 278 2016/09/12 16:48:10.706 is my Sep 12 16:48:10 2016
  279 2016/09/12 16:48:16.058 SIP Info call 10.254.0.30:42033
  "" 2016/09/12 280 16:48:16.061 calling APP Info 22: incoming new SIP call of '[email protected] / * /"
  281 2016/09/12 16:48:16.098 calling APP Info 22: "Leonardo Silva" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  Appeal of error SIP 16:48:23.743 282 2016/09/12 22: close call due to failed invitations
  283 2016/09/12 16:48:23.743 call CMGR Info 22: disconnection, '[email protected] / * /"-service not available".
  284 2016/09/12 16:48:23.745 calling APP Info 22: shoot call them from "Leonardo Silva" - destroy at request end. not available
  SIP 16:48:23.835 285 warning call 2016/09/12 22: unable to close successfully the dialogue with BYE
  286 2016/09/12 16:48:31.937 call CMGR Info 21: disconnection, '[email protected]/ * / '.
  287 2016/09/12 16:48:31.937 calling APP Info 21: shoot call them "Fabio 2s" - destroy at request end. remoteTeardown
  

  I have check all information in othe Detective Conan in this forum: https://supportforums.cisco.com/discussion/12294701/telepresence-server-...

  I made recommendations, but with IX Protocol disable SIP PROFILE DRIVER and MEETING ALIAS, the same error occurs. My maximum size of incoming messages is updated to be 11000.

  Internal Conference is going on normally.

  Any idea?

  Best regards;

  Fabio Santos

  I've seen some similar behaviour in the past - on trunk SIP pointing to the highway, try to uncheck the "SRTP allowed" and see if it works.

• Video streaming via video-conference notebooks

  Hi all

  "I'm setting up a video conference to three places and I use the ' CTS-EDGE95-K9" for each of the sites.

  Now, they want to be able to communications stream video via laptops (at least 5 instead of the eact) in each of the three locations.

  Now it is possible with devices that it is? Or do I need to add additional devices?

  Also, how is assigned license here?

  Please this Advisor will be appreciated.

  Kind regards

  Peter.

  95 EDGE Codec offers an internal streaming server.

  The streaming service can be configured through the web interface of the system or the system itself.

  I don't know how many viewers continuous sleeps well.

  Details on the streaming service can be found in the Administrator's guide or the link below.

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11304/ps11313/ps11382/data_sheet_c78-628575.html

• SX20 block unwanted call during the session of the video conference

  Hi all

  It should be your advisor on it

  I have a set of SX20 that is configured as a standalone device (No. CUCM, VCS).

  Its work fine, able to make and receive calls through the IP address.

  Things in our video conference meeting, is sometimes a unwanted number would call us and disrupt the flow of the meeting.

  I don't know how they get our IP address, but we don't expect their call.

  Is there any way a setting to block many unwanted call us or disturb us during the video conference meeting.

  Is there any configuration that I need set the SX20 itself to prevent the unwanted phone number

  Please notify

  Titebiket

  This is probably a scan SIPVicious or similar, which is how the call is 'you find '.

  I have not tried it myself, but there is a selection option or not to allow incoming calls when already in a conference call:

   Conference 1 IncomingMultisiteCall Mode: Deny

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• A few questions about the video conference via the public network

  Hi all

  I have a few questions that need your help:

  1. normally, I connect endpoints to MCU via local network (extended WAN) so everything is OK. But if I want to connect to the MCU via the public network (e.g. Internet FTTH), am I any equipment more or MCU settings? Need video firewall option?

  2 Cisco Telepresence does support VPN for remote endpoint to join video conference?

  Thank you

  Hi yours!

  (1) If you are looking in the connectivity, I would recommend that you speak to someone in sales of cisco (partner)

  to tell you a little more about the deployment of VCS-E and VCS - C.

  You need something to do good firewall/nat traversal, not only for the nat in your organization,

  but also for remote users with endpoints behind a nat home router,...

  (2) the endpoints and the infrastructure do not have a vpn client, but you can of course use VPN router between the two.

  But you should know that the video uses a certain packets per second and bandwidth so the vpn router could

  in trouble and a vpn also adds the overhead rate ip then you have MTU problems.

  But yes, I saw people using Cisco Telepresence via VPN.

  Yours: Please note the answers using the stars below!

• Video conference system

  We have two requests of the customer on the videoconferencing solution can someone

  1.

  .       In the current scenario once the video conference session created & participating all joined the conference call, his name appears first & teleconference establishing later after their name disappears.

  Requirement is to show their name/display name of participant for during the entire session of the call

  2.

  Second requirement the Conference telephone automatic planning via a device MCU (centralised management); instead of everyone (all participants) dial for bridge, it should start by the central unit on behalf of everyone & connect all conference participants (depending on the time of the meeting of the Conference call will get launched from the centralized management system)

  For you to invite participants that are preconfigured, you must first add them as endpoints H.323 or SIP on the MCU. Just follow the guide supplied. Once added, you can invite participants pre-configured by checking just them and the MCU will automatically dial on these parameters once the Conference starts.

  By going in the global settings of MCU:

  Settings > Conferences > time to display the names of the participants

  This setting determines whether (and how long) participants showed for the components is accompanied by their name provided.

  Kind regards

  Acevirgil

• Video conference Flash - getting started

  I'm a developer, ASP.net/c# implementation of a Flash site interested video conference.

  Any help would be appreciated.

  -Allan

  Flash MX is really obsolete.

  I think that it would be desirable to learn AS3 and perhaps have a good book of reference available... can't really Advisor that one is better than the other. But Flash AS3 is a very broad subject. If your goal is highly concentrated... Flash Video Conferencing, then you might want to rely more on resources, forums and online reference documents.

  http://www.gotmyidea.com/78377-008-editing-a-FlashMeeting-video-replay.php

  http://FMSGuru.com/forum/messages.cfm?ThreadId=F15363BB-A7BB-AAF9-2A5A47F24BD6B20D

  http://www.WinSite.com/Web-development/Web-design/Flash-video-chat/

  other Forums Flash:

  http://Board.flashkit.com/Board/index.php

  http://www.ActionScript.org/forums/index.php3

  but you will need to work with streaming multimedia server so be sure to contact the Red5 Forum mentioned above as well as

  http://forums.Adobe.com/community/Flash/flash_media_server

  and

  http://forums.Adobe.com/community/Flash/flash_media_live_encoder

  Best wishes

  Adninjastrator

• Address of the TMS video in booking Email

  I noticed that the video for dial in participants address is not added to the e-mail of reservation sent by MSD where all participants are to dial automatically.  Which means that the address of the video appears only in email when someone is configured in TMS to dial in the Conference themselves.  Is there a way to make video addresses to the Conference, always present in the mail, regardless of the method of numbering is still dialing, mixed dial-out/in or simply dial in?  I tried to edit the template myself, but can't seem to understand.  It would be nice to have video addresses always there, just in case someone decides to compose, and if they e-mail, they can without having to contact someone to get information.

  Thank you

  A such feature request has already been opened, but it was closed about six months ago. Closing comment was "Please reopen with use cases additional if you still feel it is something as necessary", so I guess there is always an opening if you can demonstrate a strong need for this.

  If this is important to you, contact your account manager or another Cisco point of contact and refer to CSCui83431. Try to be very clear about what problems you are experiencing because of this limitation, and maybe we can get it to the order of the day again.

  Kind regards
  Kjetil

• Video conference will operate without a license server TP and conductor?

  Hi all

  We need POC for video conferencing with Cisco Jabber on desktop. The scenario is similar to that we have CUCM 10.5 running in the trial license and server TP and TP driver running on the virtual machine without a license.

  We will reach videoconference without license server TP and conductor?

  Thank you & best regards

  Louis Nithin.

  Conductor Essentials can run without licenses, it offers all the functions of conductor but is limited to 1 bridge Conference and no grouping, refer to table 1 in the conductor datasheet for more information.

  TelePresence Server requires licenses to operate, you will need to purchase a license for the software, so it can be activated, as well as wallpapers or multiparty license licenses.  Screen licenses are per participant and installed on the telepresence server itself, while the multi-party licenses are either user or conference of base that are installed on the conductor.  Refer to the presentation of the product just above 1 Figure in the data sheet of the telepresence Server about the screen and the multiparty licensing options.

• By TMS MCU conference number

  Hi all

  We recorded with vcs several MCU Standing Conference, the source of the telephone directory of endpoint is TMS. I am able to discover and manage all the end points of TMS.

  How to display the number of MCU Permanent conference on endpoint through TMS telephone directory? So that users could dial into permanent conference of the directory itself?

  Currently, I have discovered all the endpoints of TMS and its appearance on all telephone directories of endpoint.

  Thanks in advance!

  Bobby

  Hi Bobby

  Create a new source 'manual list type' less manage sources of the telephone directory. Save and add a contact. Type the conference name, add it.

  Now click on the add contact method and write the address you use to dial the Conference. SIP or H323, (E164 alias is H323)

  Save it and go in manage inventories, create a new directory and connect the source you just created. Then click on set on systems and select all the systems you want to see this directory. And save.

  Every endpoint should now be able to compose this conference through the phone book.

  / Magnus

• Cisco TMS - custom with MXP endpoint command problem

  Hi all

  I have try to disable the RCDO H264 with the TMS custom custom on all the endpoints (to solve a customer problem with lync2013)

  It works for the endpoint of C SERIES but does not work for the MXP endpoint.

  I have try it with this command:

  You have already encountered this problem?

  Do you know a solution?

  Thank you in advance

  Samy

  What version of TMS are you currently using?

  I have TMS 14.3.1, and if you are looking for in models of configuration in TMS under MXP, you should see the configuration item to disable this option for you.

  In any case...

  Off

  May be easier to use the TMS configuration, but the string above should work.

  I hope this helps.

  VR

  Patrick

• 5320 MCU in TMS - booking Conference

  I have a new 5320 MCU configured and managed in the TMS.  I can create a conference directly on the MCU, add participants, and it will dial a number and join the participants to the call correctly.  However, if I try to book a conference at TMS by selecting the participants and resource MCU, MCU does not connect endpoints for the call.  If I look at the details of calls that it said shows the following.  It's like he is waiting for the client to call the bridge, not the MCU outbound calls to customers?

  Participants will connect using this route:

  Customer MOVI ==> Bridge

  Hi if it is customer movi you attempt to dial, you must assign the automatic Conference connect and then add outgoing call participants where you type the movi/jabber address manually. You can see the connection setting tab before saving the Conference to see how the call will be set up (if the mcu expectd the customer allowing to switch or the mcu dial out). Customer MOVI has not automatically as regular endpoints generally have for the SCM cannot guarantee the call will implement.

  /Magnus

  Sent by Cisco Support technique iPhone App

• Video-conference - BW

  Hello

  Could you please tell me how much need for BW video editing HD conference between branches?

  Thank you

  It will depend on all the points of termination / infrastructure / required resolution and speed...

  Take a look at the table at page 115 of the SX80 Administrator's Guide to get an idea on the rates of appeal for various conditions.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• bring an object in the foreground in the master - missing command

  I'm really stuck with it and I just started...

  I am trying to place a color under my head & followed the help section that says;

  Re-order content from the master page select the items on the main page, right click

  and select " " Go to first master plan "or"Move to master background"of "

  
  

  but this command is not available to me - I'd be very grateful for any help... Please - Alexandra

  Hello Alexandra,.

  This option is no longer available in recent versions of Muse and has been replaced by layers, as shown in this screenshot: http://prntscr.com/2hrncq

  More information on the functionality of layers found in the links below:

  http://helpx.Adobe.com/Muse/tutorials/layers-Muse.html

  http://TV.Adobe.com/watch/Muse-feature-tour/Adobe-Muse-layers-panel-may-2013

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/working-with-layers-in-Muse-cc

  I hope this helps.

  See you soon

  Parikshit