To access the logs CHKDSK on Windows 7

Similar Questions

• shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

  shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

• I'm trying to access the functions tells me windows explore stopped workingI

  original title: Explore Windows crash

  Unable to access any windows especially update function, which is where I am responsible for the problem. I'm trying to access the functions tells me windows Explorer has stopped working

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I access the account administrator on windows vista Home premium, step by step, please? __

  I need to access it because I have windows vista and some files I downloaded or obtained by other computers, when I try to delete...

  as I said when I try to delete some of these files, it won't let me just it gives me a message saying that the destination folder access denied, and he says you need permission to perform this action, I mean files are not windows or even programs most of them is files mp4 video , mkv, so what do I do to remove those and the way in which these files do not have any program.

  I tried access security by the properties and files was my own total control and all, but it didn't always work and I do not know how do exactly to access the administrator account in windows vista mabe of where the files will be deleted.

  Try in safe mode. Restart the computer and press the F8 key repeatedly to access the menu diagnosis where you can choose Safe Mode. MS - MVP - Elephant Boy computers - don't panic!

• To access the log file entries in Oracle 10 g with respect

  Hi all
  How can I access log files entries in oracle 10 g (linux) by questioning... and where it is stored to the origin
  Thank you...

  user8843114 wrote:
  In fact, I do not know the difference between the log files and Audit information... are they equal?
  I know how to obtain audit information... that is to say using a table sys.aud$... is it possible to access the log files if the two above are not equal

  It really depends.

  "Log file" is a generic term. Most of the time it refers to record information in a flat file outside the database. And there are many types of log files. An Oracle database's redo log files and archived log files. An application will have its own log usually on a middle-tier server. An Oracle database can be configured to generate an audit trail in an external file or in a database table (SYS. AUD$). And there are dozens of other ways that people could use the term "log file."

  Depending on how you use the term, it may or may not be possible to access the information in the log file of the database. You will need to know what log file you were interested and where this log file. If the log file is accessible to the database, it would probably be possible to use external tables or same UTL_FILE to access information, depending on the format of the log file.

  Justin

• Unable to display the log file in windows 7

  Hi all

  for all of you who are familiar with the text game, I use customer gMUD a certain game. gMUD is able to record activity as a document that is readable by microsoft Notepad.
  so, one evening I played and connected my activity where the customer is located, for example c:\program files (x 86) \gmud
  After the recording session, when I went in this directory, the journal was gone! in fact, there were 2 newspapers, lets call them document1.log and document2.log
  I did some troubleshooting for:
  1. When you are prompted for a location to save a log, when I choose my office, the journal appears and I can read it just fine using Notepad. This means that there is nothing wrong with the ability of the client to write and record newspapers.
  2. When you are prompted for a location to save a log, when I choose the directory where is located, my client of mud and give a name, say document3, I see that document1 and document2 are there. I can now logging document3. but as for the previous 2 logs, when I open the directory in windows Explorer, it is simply not there. This means that the issue is consistent and I can reproduce it. and also that the logs are there, but I can't visually see it.
  3 tried setting the options files of the control panel to show all hidden files, but the documents don't show still in windows Explorer.
  4 tried to open the document via prompt back but the documents cannot be found.
  5. I tried running Notepad and navigate this particular directory but there is no .log files or .txt files.
  some other info:
  running windows 7
  used AVG at the time
  my last hint is that the writing of the flies in a "program files" folder is somewhat limited (not hidden) and there should be a way to document1, document2, document3 access. can someone please show me how?
  Hi Maraquet,
   
  Thanks for choosing Microsoft Community Forums.
   

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question; It is better suited for the IT Pro TechNet public.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro
   
  I hope it helps. If you have problems in the future regarding Windows please let us know. We will be happy to help you.

• HP laptop - 14-ac003ne: brand laptop nine a of the log files and windows event, dated more than a year ago

  Hi all

  I am writing this post with a heavy heart. I did research to buy a laptop for three months, and finally, I decided to buy HP laptop as laptops for HP computers reviews were good.

  I bought the product (HP for laptop - 14-ac003ne) to the Kuwait on September 23 and went to India for holidays a week of. I started using the laptop and it was pointed out that there are a number of scratches of line on screen, completely unacceptable for a brand new product. Seeing this, I checked the logs, as well as the windows directory and pointed out that the laptop was one is not a brand new and it had from its windows and IIS in October 2014 information.

  I'm really happy with the purchase and to return the laptop.  Could you please tell if this is possible?

  I go to the Kuwait this Saturday. Y at - it an email address to raise my concerns of HP sales management?

  Thank you and best regards

  Anil

  Hi coolbiy, you can find all the support options for your region on this page: LINK

• Can I access the registry of a Windows installation on a disk that is not the main Windows disk?

  The original installation was Windows 2000 Server. The old motherboard failed. The disc is fine.

  There is information in the original register I want to import into the new registry of Server 2008.

  Can I access this original registry if the drive on which he lives is seen as separated by another installation disc?

  IE: I have the original disc of server installed on a PC bench. This PC bench sees the original server disk in drive E:

  I am able to see the entire disk of the original server disk structure.

  Can I access the registry Windows of this disc?

  Can I export a few registry keys to import them into the new registry of the server?

  Yes.

  You can do this by using Regedit and editing of your disk E: registry as a "hive" in your registry active.  To do this, follow the following procedure:

  • First, back up your current registry in case things go wrong.  Then
  • Start Regedit (start-> Run-> 'regedit')
  • Start Regedit, click once on 'HKEY_LOCAL_MACHINE' (or HKEY_USERS) to select
  • Select the file-> load hive
  • Navigate to the registry file you want to extract entries from and double-click it
    (Probably E:\Windows\System32\Config\...)
  • A window will appear asking a key name.  Enter something unique (I'll use "ABC" here)
  • Now, look in "HKEY_LOCAL_MACHINE".  You will see an entry 'ABC '.  Navigate in this article and you will find entries to the registry hive that you selected.  You can now extract parts of it with the file-> export
  • Take what you want then once finished, click once on the entry 'ABC' and make a file-> unload the hive.
  • Exit Regedit
  • After the export of the files, use a text editor to edit the path in the exported file to where you want to put in your registry and double-click it to merge in.

  Hope that this gets you where you want to be,
  JW

• access the list of computers Windows networks

  It is used to access the list of computers that are on the network with active X through the my network place - any network - network Microsoft Windows - "mynetwork" and if Yes see who has sever VI activated?

  
  

• Windows XP has been infected with a virus/trojan via the net and will pop up window wanting to access the app tray and Windows install wants to work.

  Original title: tray app

  I have a PC with Windows XP. He has been infected with a virus/trojan via the net. I can't access the net, but I have now access to readers of DVD and CD. On the screen is a window who want access to the application of the status bar. I don't have a restore date prior to infection. Installer Windows guard eager to work. How can I get going again and remove the virus/Trojan? I also have a laptop with windows vista. I can download MSE on my laptop for windows XP and copy it to a CD and then use it on the PC?

  Hi shanethornton,

  You can try to download Microsoft Security Essentials from the link below for a CD or a USB key and try to run it on the infected PC and check out them.

  See the link to download Microsoft Security Essentials:

  http://www.Microsoft.com/security_essentials/?WT.srch=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the rear button on Windows Store

  Original title: Bug Windows Store

  When you perform a search in the Windows store and by selecting an application, the back button becomes unresponsive. Everything else on the Tablet works, like repeating the search to return to the search results page, but the back button is useless once I tap on an application.

  Pretty annoying bug.

  Hi JF Laflèche,.

  Thank you for writing to Microsoft Communities. The problem description, I understand that you are not able to access the rear button on store Windows. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  I suggest you run the troubleshooter app and check. Click on the link provided and save the troubleshooting tool when solving the problems are saved, run the troubleshooter.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Impossible to access the contents of a window (PopUp)

  Hello
  
  I'm trying to access the contents of a MovieClip I placed inside a PopUpWindow component, but cannot figure out how to do this. I've created the window with something like this:
  var SAedit_win:MovieClip = mx.managers.PopUpManager.createPopUp (_root, window, true, {closeButton:true, title: "Arterias Sistemicas", contentPath: "contentSA"});
  
  With this code, the window IS correctly created and the "contentSA" MovieClip (which is in the library) is properly indicated. However, I wanted to access the objects inside the "contentSA', but I can't find a way to do it. I have already tried:
  -SAedit_win.content (which is read-only...)
  -SAedit_win.contentsPath (which of course did not)
  -SAedit_win.target
  -SAedit_win.contentSA
  
  Can someone help me with that please?
  
  
  Tanks in advance
  
  JLonardoni

  Well, I give up. I looked everywhere on the net and found out that I'm not the only one. It is a not uncommon problem, but I think he has no answer, because all the forum posts I found unanswered.

  So, I have developed my own window with everything I wanted... It is not very OO, but it does the job.

• BlackBerry smartphones can not access the device memory in Windows Explorer

  When I plugged my blackberry on my XP PC, I used to see the memory of the device and the SD card in Windows Explorer.  Now, only the SD card is in the Explorer.

  In the Desktop Manager, I used to be able to see the two also.  Move files and others.  Now I don't have this option.

  It is a new company blackberry secure (password to unlock).  Don't know if the problem occurred the same time, I received my new phone...

  top of the page: "SOFTWARE".

• How can I access the log files of the application of a ThinApp on the virtual drive?

  I thinstalled an application using the v4.6 and I am able to launch and run the captured application.

  But the application creates log files to:

  c:\Program files\ensembleProAgent\LOGS\

  So I can access them on of ThinApp virtual drive?

  If so, any help is appreciated, I don't know where is the virtual drive or how I can access / read it.

  Thank you

  Joel

  Hello

  A virtual drive in the world of ThinApp means a disk that you have virtualized so he will be present for the virtualized application. If you mean by the word virtual drive where we keep the changes not applied to the physical environment are you talking about what we call the sandbox. Default location would be users with roaming profiles in a folder called Thinstall (ThinApp used to be called Thinstall until VMware has acquired the product)... Method of pomp for the sandbox would be to hit start - run on your client and enter %APPDATA%\microsoft\windows\sendto and click OK...

• How can I access the 'Options' of Firefox window?

  I'm trying to change the setting for Firefox, so I can access Flash, constantly, but I can't locate the 'Options' window that I read in the articles, that I need to make changes to what I can access Flash. Can you tell me how to access? Or if not, how do I permanently change my settings so that I can access Flash again? Thanx

  You can find the plugins on the subject: addons page:

  • Firefox/tools > Modules > Plugins
  • https://support.Mozilla.org/KB/why-do-i-have-click-Activate-plugins

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab