Error reading disc after reinstalling xp

Similar Questions

• Error reading disc after HD upgrade

  I am trying to upgrade the hard drive on my laptop T60 and get the message "a disk read error has occurred. Press Ctrl + Alt + Delete to restart. "I'm grateful for any help that anyone can give.

  The old hard drive is a Hitachi 60 GB HTS541060G9SA00 model. The new hard drive is a Samsung 500 GB HN-M500MBB model. I used Acronis True Image to create an image of the partitions on the old hard drive, following the procedure and the guidelines that I found here:

  http://www.wilderssecurity.com/ShowPost.php?p=1299861&postcount=9
  http://www.wilderssecurity.com/showthread.php?t=203480

  To recall a few aspects of the process: I had the * new * hard drive in the machine; I started on the Acronis CD; I have restored/resized the image stored on a hard disk USB hard disk nine. When I boot the disk hard nine, I get the message "disc error".

  What I tried:
  * I started to UBCD. On this basis, can I open 'My Computer' and see the partitions on the new drive, and I can see the files and folders it contains. The c: partition is NTFS, MB 64428 with 43501 MB of free space; the D: partition is NTFS, MB 418765 with 393804 MB of free space. I guess that means that the hard drive itself is not defective.
  * I tried to change a BIOS setting: the "Serial ATA (SATA) ' definition '[compatibility]' and start (got the disc read error) and then on '[ACHI]' and startup (once again, the disc read error). This is beyond my knowledge, but I read on a forum somewhere that this setting failover helped someone with a somewhat similar problem.

  Any suggestions? I'm grateful for any help you can give. Thank you!

  I didn't realize that the two forums were related or frequented by the same community or I have not posted in both places. I was able to come to a solution, the details here:

  Forum.ThinkPads.com/viewtopic.php?f=29&t=102535

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• Satellite L300 - error reading disc so I can't start Vista

  Please can you help me?

  Have a Toshiba Satellite L300. All I get is disc read error has occurred, please press Ctrl Alt + Delete.
  How can I get to start again. I have no idea what it takes then just keep pressing Ctrl Alt + Delete and it says a disk read error has occurred.

  I'm going along in circles in. Running Windows Vista Premium.

  Hello!

  You can access the advanced boot menu if you press F8 after starting the laptop? Then you can start to the recovery Toshiba HDD option (select Repair my computer).

  If you can access the advanced boot menu, you must reinstall Windows Vista from the t. Therefore, you can use the Toshiba Recovery disk if you start from it.

  Good bye

• Error reading disc Y560d

  Last night, suddenly my laptop crashes and I decided to restart it but after the BIOS menu, there the "Disc Read Error - restart CTRL + ALT + DEL" Message and I cannot go further from here.

  What I've read I need to replace my HARD drive?

  If so, should I buy a new, or would it be better to call technical support in an attempt to replace.

  I am still under warranty.

  You should communicate with warranty, let them do it for you.

• SlimType BD E DS4E1S will not read discs after windows update

  My laptop has a Slimtype BD E DS4E1S drive.  After doing upgrades with windows 7, it can now read all disks.  All MS suggests tried, but nothing has worked.  Don't ask, discs have been read in the same drive, before this problem started.  The computer is only a couple of months.  This utility shows no problem with the drive.  It just keeps telling me to insert a disc, such that no disk is detected.  Already tried changes to the registry (MS) and uninstall, reinstall the driver with no result.  Any suggestions?

  Hello

  I suggest you to wait for the manufacturer of your computer, ASUS responds again to you. It's a hardware problem and I suggest you contact the manufacturer of your computer for assistance.

  Kind regards.

• Receive errors for drivers after reinstalling Windows 7

  Title: Windows 7, re - install failure of recovery driver

  Hello everyone. For one reason or another, I decided to re install windows 7 on my Samsung 7 times. Given that I had no problem in the past with re install vista on my other machine, I am wrong, even if it would be a walk in the Park. In any case, now after re install windows, several drivers disappeared, and I can't connect to the internet (on this machine) to allow windows to find them for me. Help, please!

  The devices that are absent from the drivers are the following
  --------------------------------------------------------------------------------

  Ethernet controller (location PCI bus 3, device 0, function 0 unknown manufacturer)
  Intel Centrino Wireless - N + WiMAX 6150 (location of port #0003. Hub_ #0004
  Network controller (location PCI bus 2, device 0, function 0)
  Simple communications controller PCI (location PCI bus 0, device 22, function 0)
  SM Bus controller (location PCI bus 0, device 31, function 3)
  Universal Serial Bus (USB) controller (PCI slot bus 4, device 0, function 0)
  ---------------------------------------------------------------------------------
  (All of these devices have error code 28)
  In addition, My Standard VGA Graphics adapt cannot start (code 10)
  I have the drive recovery for windows 7, but he could not install these drivers. I have 1 slot USB to work, that I can use to see the drivers for the computer I use now, who is severely disabled at the moment. Please help me restore my computer healthy!
  Thank you for your time.
  Also, I am running windows 7 64-bit *.

  Hello

  After the reinstallation of the operating system, it is important to reinstall all the required drivers from the manufacturer's website to improve and optimize the performance of the computer.
  I suggest you to install all the necessary drivers on your computer and check if it helps.
  http://www.Samsung.com/UK/support/model/NP700Z5A-S01UK-downloads
   
  Hope this information helps.

• Screen error black patch after reinstalling/updating VISTA on my desktop HP Paviill a6137c,.

  I have a HP Pavilion a6137c desktop purchased in 2007 with Vista 32 bit OS.

  My original factory hard drive failed [multiple power cuts in the short period of time] the error screen says "bad sectrors" well I could substitute these areas [somehow] and I continued to use the player for a few weeks/months before the "bad sector" error came again.

  I bought and installed a WD Caviar Blue SATA 320 GB Hard drive model #WDBAAX3200ENC-NSPS.

  I still have the old hard disk installed but not hung in the second Bay from the HD.

  After you have installed the origianl software [I bought HP factory records a couple of weeks], Vista Home Premium 32 - bit, I ran Windows Update with its updates 106 or 107, he recommended.  After completing the update and restart, Windows does not load, I get a black screen and invites me to restore to a previous restore point.  Paragraph of error message basically says that he was a "'patch', causing the problelm, but I don't know which.»  I apologize for not sending you the error message I get, I had restored the computer before thinking to copy.  I'm under update again and if I get the error again, which I'm sure I'll [because it is the fifth or sixth time I've restored and re run upd8 er] I'll send over the error message if necessary.

  Thank you very much for your help!

  Ann Bailey

  As of this minute, I'm re-running the updates and plan to run Microsoft FIX IT

  Thank you for your offer to help, I don't have the error this time, assumes that the FIX WORKED program! Yay!

• Help! 100% reading disc after starting about 5 minutes windows 8

  I was not able to get your comand work, he said something error with '-start the trace "command

  I did it with the program Windows Recorder PErformance with Performance scenario set on Boot.

  My pc automatically rebooted 3 times and the recorder ran 3 times with a timer that makes my pc restarts when it ended. Here are the files.

  1st round

  2nd round

  3rd run

  ARE

  The only successful even partially.  Race 2 & 3 had no useful information

  It seems that your connection to Facebook is the question (the modern UI app or someother Facebook app?).  I have no idea what app or how you are connected but that connection pinned the HD 100 & 180 seconds.

  All that 'sync', is the cause of the collapse of the HD.

  

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• Error activation 0xc004c008 after you have reinstalled Windows 7 a few times?

  Why do I get the error Activation 0xc004c008 that the key specified product could not be used after the first 6 reinstallation of Windows 7?  This error occurred when I tried to reactivate Windows 7 via the internet after reinstalling Windows 7 after the first 6 times?  I had to use the automated phone system to activate.  It is not a key misuse, it's a key was used error impossible.  When I run slui 4 and then click on next the phone Wizard displays the installation ID even among reformats.

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers - Ramesh Kumar http://www.WindowsValley.com

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani