To copy the Gradient slider

Similar Questions

• Why the gradient does not change when I copy and paste from one document to another?

  Here is a screenshot of the objects I want to copy to a new document.

  

  As you can see in the following picture, the gradient changes considerably between the two documents.

  

  All parameters in the gradient panel are the same, so I have to assume there is a document setting that differs between the two.

  Also, I tried to change the mode in the CMYK to RGB color Panel, and it was locked to CMYK.

  Any help would be appreciated!

  Thank you

  Robbie

  Sounds like the two documents is defined on (a RGB and a CMYK) color modes. The title bar should indicate the color mode you are using.

• How can I copy and paste a gradient of color of a document and then use the gradient on another document?

  I make business cards. On the back of the cards, there are two lines with gradients. Here is a map with a gradient of magenta. I want to select the two lines and change the magenta gradient to the orange gradient from the file below. How can I do this? (I don't want to copy the orange lines to a paste, then move them on those magenta). I just want to select the magenta lines and change their color to orange gradient. This will ensure absolute alignment. I want to repeat the process with several other gradients too. Thank you.

  

  

  David,

  If I (put) understand, you can:

  (1) a way to copy orange gradient of magenta paper path degraded;

  (2) select the two paths of magenta gradients and change the fill to none;

  (3) select the orange gradient path;

  (4) select the two paths of magenta gradients and replace the gradient fill.

  That should give you the desired replacement. For multiple uses of the same gradient, you can consider a shade of gradient.

• Graduated filter: on the screen, I do not see 3 lines and a point. It applies the gradient between the middle and it affects the entire slide

  Graduated filter: on the screen, I do not see 3 lines and a point. It applies the gradient between the middle and it affects the whole slide.

  Please help me

  Press H

• Best method to copy the audio project to the new slide?

  Captivate v5.5

  I have a project composed of slides.

  Each slide has its own audio.

  I need to update the project (resizing and editing slide images), but the audio does not need to be changed.

  Rather than recording the narration for each slide again once, I intend to copy the audio for each slide of the old (export) project to the new project (import). Audio slide 1 of the former gets attached to the slide 1 of the project new etc.

  Suggestions as to how best to do so taking into account, I have several slides each with their own audio and I make sure that I am attaching the right audio file to the new version of the slide, it was copied from.

  Thanks in advance,

  Noel

  Hi Noel,

  Can only explain what would be my method in this case. All the audio clips can be found in the library, but they have a very descriptive name. I identify and change the name (if they must go on the same slide number, simply put the number of the slide inside). Then in the new project I open the former as an external library (file, import, external library) and drag audio clips to slides that are appropriate. External libraries are so little known, but I use them all the time (have a set of functions frequently used in the files in separate project that I only use external libraries)

  Lilybiri

  PS just see the official answer from the staff, but please, rename your clips there as well or you will not be able to identify them. In the original file, you can watch the clip in the library of each slide

• How to copy the address bar

  Once upon a time in a browser, there was an EDICT to copy the link into the address bar. I would like to have this feature because it is difficult to highlight the address so it can be copied to the generic copy.

  I searched mozilla for this function and the search function does not seem to recognize the term copy. The results include all kinds of things to do with the address bar, except the copy.

  Thanks to all those who have provided a response & being persistent. I have been using the right click and select copy from the drop-down;

  As I'm used to, I like it better than the selection on the Edit menu.

  Reminds me of one of my desk at work buddies - whenever I asked him how to do something, the answer was always - right Click & it has always worked.

  I'll have to keep that in mind.

  I think it only working not once in this case. The slider was probably placed in the address box.

  Thanks again for the advice.

• perspective on the gradient tool. any ideas?

  I use the gradient on 3D obects space tool that I drew, I wish I could drag a slider or move an object, and the rest of the case would move with it in any influence of the object instance that I am dragging. However as they are not manipulated.

  I could spread the mixture, and then move them, but is there a way to do without developing the mixture?

  

  for now, that the perspective is reversed, it takes less space between the objects from the perspective of what concerns the distance.

  So maybe try a different approach - create a brush art or brush of an array of law model and the change once applied. And of course don't forget things like the good old mesh warping or symbols and associated tools, including the perspective grid.

  Mylenium

• Copy the closed captioning

  Hello

  If I copy a slide to another cptx, closed captioning is not copied.

  Does anyone know if it is possible, somehow, to copy the subtitles?

  Or: attach to an another audiofile?

  Why? I want to create subtitles in one Captivate file.

  Kind regards!

  What version do you use? Slide notes and CC are copied with slides of 9.0.1.320 and 8.0.3.290. I just checked.

• (Illustrator) The gradient tool keep endangered...

  The gradient tool guard disappears when I try to adjust the slider or adjust somehow. His action as the tool has become corrupted somehow. Any ideas on how to solve this problem?

  Thank you.

  What gradient tool?

  The tool in the toolbar? The annotators gradients?

  Please describe step by step. And post screenshots. The gradient is applied to a fill or a stroke?

• How can I remove the Quiz slides?

  I accidentally pressed a keyboard shortcut and now there is a quiz results slide even if there is no partition-able objects and I disabled the declaration in Quiz preferences.  It does not publish, but I still want to get rid of it and the error on erase says he'll hide the slide.  Tips to get rid of it altogether?

  You cannot get rid of a slide of Score, once you have added it to a course. It is hidden and will not be part of the file released as you have already discovered.

  Only one that I know is to copy/paste all the other slides to a new empty project with the same resolution. But why bother on a slide hidden? I've often hidden slides in my cptx projects, sometimes with comments, sometimes with a poster (for projects not AutoPlay).

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• Slide Show does not show the #1 slide, start on #2

  After months of work, we finally got the desktop version of this fenced site. Now, we are copying the entire site to phone format, which means hours and hours of resize each part of the site.

  The home page is a slideshow simple 'Hero', with the type and links on each slide. It works great, that is, until it is moved to the site of phone.

  He began, instead of starting the slide show on slide 1, slide TWO.  :-(

  The only clue that we have as to what is apparently wrong are the triggers of Muse.

  What triggers are similar to Muse on the desktop version is:

  

  ... and this is what they look like in Muse on the version of the phone. Notice the sign "+" is now appear after the FIRST slide instead of the LAST slide.

  

  We transferred slideshows from desktop to the phone and tablet before and used exactly the same versions. If (1) WHY now, the sign '+' appears on the FIRST slide, instead the LAST of them, and (2) HOW to move to the last slide, the FIRST slide appears when the page is presented in preview or published?

  Thanks for ANY idea.

  Nevermind, it is fixed. But seriously, what HASSLE.

  The procedure we used to reorder the slides has been:

  1. move the first slide (which was now LAST) in the last position (moving the trigger)

  2. make a new slide empty by clicking the sign «+»

  3. go to the far left slide by selecting its trigger, select everything manually (piece by piece), cut all of the selected items, and then go to the last slide and glue in position.

  4. return to the first slide (now empty) and remove its trigger, which removes this slide.

  -Repeat until all the slides except the REAL everything first glide are moved - now the sign '+' is after the last slide in Muse, which is where it SHOULD be, and now the FIRST slide appears FIRST, as it should.

  Ugh.

  Still, I would like to know why this happened in the first place, since we have started with the first slide and resized elements successively, one slide at a time, in order. We have never rearranged no slides when we their copied as the composition of the version of office to the version of the phone, and we have resized each of them in order, from first to last.

  ???

• Color for the gradient tool selector

  Recently, I started using Adobe Illustrator and watched many tutorials for the basics of it (from Photoshop), but one thing I'm not too comfortable with is the tool gradient in Illustrator than Photoshop.

  I keep reading that the only way to adjust the colors must either use the colors in the color chart or color slider mini but is possible to choose the colors that you can in Photoshop? (Screenshot attached to show what I mean)

  Any help would be greatly appreciated.

  

  When you have selected a point of gradient in the gradient colors Panel you can double-click the fill color icon in the tool palette to change color with the color picker.

  Not sure if that's what you're looking for.

• Copy the /Paste procedure

  Is there anyone who can help me with how to copy and paste my sql commands at the command line? I tried to do it for two weeks now and have failed! I would like to copy a text in the command line editor. When I try to do my command line returns this!     (^V). Help, please. Thank you, expertise23

  >
  I would like to copy a text in the command line editor
  >
  Right-click Windows in sql * over the window and select "Paste".

  To select text in the sql * over the window with the right mouse button in the sql * over the window and select "mark". Then move the slider until the beginning of what you want to copy, hold down the left button of the mouse button and drag the mouse to highlight the section you want to copy to the Clipboard.

  When you have the section highlighted, right click on the top left corner of the command window and select "edit - copy" in the menu to copy the selected area in the Clipboard.

• Insert the image on the slide behind the objects 'slide '.

  Hello

  I use Cap 5.5. I created a template of slides with a banner of upper and lower curves. (image imported into Photoshop layers).

  On each normal slide, I want to insert a background image which is located behind the master slide banners objects (resizing of the image on the use of normal size, click and drag is not possible because of the curved lines on the banners). I can't find a way to do this. (apart from copy and paste banners on every normal slide)

  On the normal slides the 'Master slide items at the top' is not checked.

  Each object on the model of slides by using the reorganize option makes no difference.

  No idea how to do this?

  Thank you

  Donal.

  I use a blade master Knockout in this case: master slide covered with an image that has a transparent part in which the image of 'background' can be mounted.

  Long ago I described the workflow:

  http://blog.lilybiri.com/create-and-use-a-knockout-master-slide

  Another possibility is to place banners on the first slide and their time for the rest of the project (with the option always on top verified)

  Lilybiri