To create a custom message automatic so when ANOTHER user logs it appears

Similar Questions

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Create a custom Message?

  I would like to create a custom popup message for a form.  What I'm looking for, is when the user types in a series of numbers and if the total is less than 650 000 a message pop - up will appear explaining what to do next, then the user clicks OK and the box disappears.  Thanks in advance for any help.

  I don't see the behavior you describe.

  The way it's Setup is the calculation does not fire if all four fields have something in them (the script is on the calculate event). So you should not see a popup when you open the form. If you are setting a value of 0 in the field then that could trigger the popup but I tried it and it seemed to work ok.

  You will get a popup every time, after the fields are filled, until the amount is more than 650 000.

  You can certainly put the script on a button instead of the calculate event - that could solve some of your problems.

• Send button is grayed out when I create a new message, but not when I answer.

  Send button and the spell check button is grayed out - as are the format and insert menus - when I create a new message. When I reply to a message, all the buttons and menus work. If I start to answer, but change the beneficiary, subject to line and insert a completely new message, I can send it.
  TBird worm 31.4.0 (installed recently. The question could have started with this installation, but I'm not sure.)
  Windows 7 Pro, Version 6.1, Service Pack 1
  Gmail configured according to the instructions from google.

  and the Send button becomes active when you actually address your mail (you can not send mail without address)

  The spell check button has no content to check, so it does not work until you start to type in the body of the mail.

  Even with the insertion, and menu format if you insertion point is not in the body of the email that they do not have a destination to work with.

• The language bar shows when the user account control appears, supposed to be hidden.

  I've been looking for an answer to this one so vain if this question has already been answered please point me in the right direction. I chose to hide the language bar after a reinstall of windows 7, but whenever the user account control appears I see the language bar sitting there, mocking me. I don't see any option to close, only to hide. It does not show during normal activity, only when the user account control POPs asking if I want to allow a program to run. It's driving me crazy.

  Thanks in advance

  Old post I know but I cannot believe no one could help you guys, I recently noticed this was happening on my pc, have no idea why, but I guess it was something to do with installation/un-installing new software. In any case, here is the solution, because I don't think that these guys have a clue of what you're going on, of course, lol.

  Click on:

  Beginning
  Control Panel
  Clock, language and region
  Regional and Language Options
  Keyboards and languages
  Change keyboards...
  Language bar
  Hidden
  Ok

  Now return to the regional and language options and then click:

  Administrative
  Copy to reserved accounts

  * Type password *, click on:

  System accounts
  Ok
  Ok

  If for any reason any you do not see a password for copy to reserved accounts, and instead, option you have this pop up with checkboxes:

  Copy your regional and language settings to these accounts:

  Default user account (new users)
  System accounts (local system, local service, and network service)
  Just check the two of them and ok.

  There's no more annoying language on UAC bar more.

• Remote shadowing / Assistance when the user logged in...

  Hello

  Is there a way I can connect to a VDI machine that is already used by a user for purposes of troubleshooting and technical support?

  Currently we use Remote Desktop Centeral in and manage these workstations, but once we introduce vWorkspace (VDI), we no longer have this feature and I want to avoid installing Desktop Agent Central on the VDI Machine...

  I wonder if vWorkspace have workaround / plans to introduce a new feature for this issue?

  Thank you

  Hello

  In the vWorkspace Management Console, right click on "Locations" and then click RDP connections

  Check the box 'enable remote RDP administration control '.

  

  Now navigate to the computer group. Right-click on the computer that you want to help, and then select

  Remote control | Remote assistance

  

  Not sure if they fixed it again where you can control the machine or if it is still seen only. Which was recorded as an enhancement request.

  Thank you, Andrew.

• Custom messages of success and failure on quiz results slide

  I'm trying to create a custom message of success and failure on the quiz results slide, using certain colors in the text caption to reflect the brand of our company. I've added a tip action entering the slide, so that if the percentage of quiz is 80% or more, shows message of success and failure message leathers. It seems like it should work, but for some reason, only the fault message views, no matter if I fail or pass. Anyone tried this with any success?

  Thanks for your help!

  This button is very important: clicking on it will launch the actions that you define in Quiz preferences, success/failure. Think that it is also mentioned in my blog, when I talk about the score slide. Maybe that you were lucky, but I especially advice to add a line short slide after this slide score, certainly everything is transferred correctly, especially when launched by LMS and many users will do the test at the same time (I have used in a college for some exams). In this case you can set the actions of pass/fail on the issue level «Go to next page»

  This thread is marked still unanswered, so I guess it isn't completely resolved?

• How can I get the username field to automatically populate when asked to enter my credentials for the admin?

  I'm under El Capitan version 10.11.5. This is mac from my employer, which they made me an administrator for. On my mac personal home, the user name field is automatically filled in when the box appears asking an administrator user name and password, but on mac from my employer, I have to type at a time, whenever he appears.

  I can't find an option in the auto-complete settings and for the mac save my admin username it when you request permissions. Anyone else know how to change this?

  Maybe this needs a clarification:

  IF you are connected to a user admin "Your Own" account, and you are prompted for an admin password,

  Well, your user name will already be pre filled in the user name field, waiting for your own admin password, on the account that you are already connected.

  BUT, if another user is connected to their own user account, and a dialog box appears asking an admin password,

  Well, this pop-up dialog box will be empty if the current user is not an admin, or pre populated with the user name if the current user is an administrator.

  So, NO, I'm not aware anyway to do a random OTHER admin appears automatically in the box pop up when another user is logged on their different user account.  On your personal Mac at home, you are connected to your own account, (most likely, you are the admin), and when a box pop up on your own account is displayed asking admin credentials, your own user name will appear here.

• Kiosk with automatic Windows XP (other user) connection mode

  Greetings,

  I'm having some trouble getting kiosk mode to work with automatic sign next to windows xp.

  Kiosk mode works if I disable autologon (http://support.microsoft.com/kb/315231), but when it enabled it gives an error saying that all desktop computers are in use.

  The strange thing is that when I enable autologon and I manually log on with another user the username that is customized to the kioskmode can I disconnect and reconnect on the desktop, all I want. But at the point where I have activate automatic login with another user that the custom user name he gives all desktop computers are currently in use error.

  Does anyone know if the Kiosk mode with automatic logon to another user than the user username custom work?

  Thanks in advance,

  Bram

  Might work if you turn off automatic logon, and then use the view GPO to disable the SSO, then allow the user to connect with the name of user and password you want.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• When loading a new site using Firefox, why do I get a message telling me that "firefox prevented this page automatically lead to another page." Allow? »

  When loading a page using Firefox, at the top of the page, I get a message saying "Firefox prevented this page from automatically redirecting to another page - allow? This happens almost every time I start a new page, and Firefox will not allow to continue the download. I tell him to allow every time, even on the pages I have "authorized" by the past.

  Clear the Cache and Cookies

  • https://support.Mozilla.com/en-us/KB/template:clearCookiesCache

  Clear the Cache of the network

  • https://support.Mozilla.com/en-us/KB/how%20To%20clear%20The%20Cache#w_clear-the-cache

  -> click on the Firefox button, then click on Options -> advanced-> general-> remove the check mark from the warn me when Web sites try to redirect or reload the page

  -> Click OK-> restart Firefox Options window

  Check and tell if its working.

• Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Of course, not as the sorting, the viewer sees is defined by them not by you - given the same USB you can use the finder to display in alphabetical order, last updated order etc. size - files have no command - the viewer defines the order

  You can select Photos and export using a file for sequential access to export name so if the Viewer uses an alpha sort they correspond to your order desired - you can facilitate this, but they must define their queue viewer correctly for them to see it as you wish

  LN

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• Contacts are still in the main Windows mail Contacts, but they disappeared from my contacts list when you create a new message

  After a system crash, restore, all my contacts are still in the main window of Windows mail Contacts, but now when I create a new message and click on 'To', all contacts have disappeared from my list of contacts. How to make their return in the list without having to re-enter them one by one which would take forever? I am running Vista Home Premium.
  Thank you.
  DC

  Hello

  Try the following article, it can be applied as happened after the restoration:

  http://support.Microsoft.com/kb/934563

  You can also export and re - import their contacts. See the link below to do so.

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts