To loop through all the leaves in numbers

Similar Questions

• Loop through all the items in a collection

  I need to loop through all the elements of a collection in a VB.NET program that uses the InDesign API. For example, I want to loop through all the pasta spread masters in a document. Here is my sample code:

  Dim I As Integer = 0

  Var MyApp as InDesign.Application = Nothing

  Var MyDoc as InDesign.Document = Nothing

  Var MyPage as InDesign.Page = Nothing

  MyApp = CType (Activator.CreateInstance (Type.GetTypeFromProgID ("InDesign.Application"), True), InDesign.Application)

  MyDoc = CType (MyApp.Documents.Add (False), InDesign.Document)

  With MyDoc

  With. DocumentPreferences

  . PageHeight = "8.5I".

  . PageWidth = "5.5i."

  Ends with

  With. ViewPreferences

  . HorizontalMeasurementUnits = InDesign.idMeasurementUnits.idPoints

  . VerticalMeasurementUnits = InDesign.idMeasurementUnits.idPoints

  Ends with

  If. MasterSpreads.Count > 0 Then

  For I = 0 To. MasterSpreads.Count - 1

  Dim ThisMasterSpread As InDesign.MasterSpread = CType (.) MasterSpreads.Item (I), InDesign.MasterSpread)

  Next I

  End If

  Ends with

  When it runs, I get an error on the last Dim statement which defines ThisMasterSpread. It highlights. MasterSpreads.Item (I) and gives the following error:

  COMException was unhandled: the Member required to the collection does not exist.

  How I managed to loop over all the pasta spread masters?

  Thank you!

  A lot of trial and error, I discovered the answer to my own question: the Collections are 1-based, not 0-based. My statement

  For I = 0 To. MasterSpreads.Count - 1

  should be

  For I = 1 To. MasterSpreads.Count

• To loop through all the variables on an image

  Hello. I am trying to write a method to save the State of the game that I do. I am able to loop through all the clips and get their existing frameworks, but is it possible to loop through all the variables on the current frame (without knowing their names) and put them in a table?
  
  Thanks 4 any help
  
  trigger2160

  Thanks for the help. A container object is just what I wanted, even though I knew not u can do. my variables are not accessible directly so I managed to change the way they were stored easily without negative effects for the rest of the game. Now I can also save and load the State of the game which entered 4 will facilitate 4 me to test.

  trigger2160

• Work Dbma_scheduler execution of procedure which loops through all the customer drawings in the rear rollers database transaction in case of exception

  Hello

  Need your contributions on the approach to implement a work using dbms_scheduler.

  We have about 2000 drawings. Each schema has a package with 2 procedures.

  The requirement is to create a single job in SYS that loop over each schema and run the procedures specific to a time (once a day) and send a notification by e-mail on success or failure.

  Working script:

  BEGIN

  dbms_scheduler.create_job (job_name = > 'LOAD_EACH_SCHEMA_AUDIT_DATA',)

  job_type = > 'PLSQL_BLOCK ',.

  job_action = > ' BEGIN sys.p_loadaudit;

  END;',

  start_date = > systimestamp,

  repeat_interval = > ' FREQ = MINUTELY; RANGE = 1',

  number_of_arguments = > 0,

  enabled = > true,

  Comments = > "Use repeat interval is every five minutes");

  END;

  /

  Note: to test the end I put him repeat interval to carefully.

  Use of procedure must be running:

  Procedure sys.p_loadaudit:

  CREATE OR REPLACE

  PROCEDURE p_loadaudit

  AS

  v_count NUMBER: = 0;

  lv_error_message VARCHAR2 (4000);

  vstmt VARCHAR2 (4000);

  BEGIN

  I'm IN

  (SELECT username FROM dba_users WHERE username LIKE '% ABCFIRM')

  )

  LOOP

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_coa; end;';

  EXECUTE immediate vstmt;

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_am; end;';

  EXECUTE immediate vstmt;

  END LOOP;

  EXCEPTION

  WHILE OTHERS THEN

  lv_error_message: = ' error in procedure p_loadaudit: ' | SQLCODE. "- ERROR -" | SUBSTR)

  SQLERRM, 1, 300). '*' || dbms_utility.format_error_backtrace;

  raise_application_error(-20002,lv_error_message);

  END p_loadaudit;

  /

  Example of a scheme: SCHEMA_01

  create or replace

  PACKAGE pkg_audit_info

  AS

  CursorType type

  IS

  REF

  CURSOR;

  PROCEDURE p_load_COA;

  PROCEDURE p_load_AM;

  END pkg_audit_info;

  /

  create or replace

  Pkg_audit_info body PACKAGE

  AS

  PROCEDURE p_load_COA

  AS

  BEGIN

  INSERT INTO TABLE1();

  EXCEPTION

  WHILE OTHERS THEN

  lv_error_message: = ' error in procedure pkg_audit_info.p_load_COA: ' | SQLCODE

  || "- ERROR -" | SUBSTR (SQLERRM, 1, 300). '*' || dbms_utility.format_error_backtrace;

  RAISE_application_error(-20002,lv_error_message);

  END p_load_COA;

  PROCEDURE p_load_AM

  AS

  BEGIN

  INSERT INTO TABLE2();

  EXCEPTION

  WHILE OTHERS THEN

  lv_error_message: = ' error in procedure pkg_audit_info.p_load_AM: ' | SQLCODE.

  "- ERROR -" | SUBSTR (SQLERRM, 1, 300). '*' || dbms_utility.format_error_backtrace;

  RAISE_application_error(-20002,lv_error_message);

  END p_load_AM;

  END pkg_audit_info;

  /

  Table1 and table1 exist in schema_01.

  All 2000 patterns have same package.procedures.

  For security reasons, I removed the actual code.

  I was able to complete the task successfully. However, when a scheme procedure (SCHEMA_01.pkg_audit_info.p_load_COA) throws an exception, the job fails, and any transaction is rolled back.

  Is it possible to loop through each schema and run the corresponding procedures. Even if the exception occurs, it must restore only for this scheme and continue other patterns in the loop?

  Please let me know if there is a better way to do this. Is the way I'm handling exceptions in the work or the correct procedure?

  Thank you

  Hello

  RAISE_APPLICATION_ERROR will cause the program to exit to the appellant, even if you put it inside a block in the loop, so the statement RAISE or RAISE_APPLICATION_ERROR must be placed in your procedures 'pkg_audit_info.p_load_AM' and 'pkg_audit_info.p_load_coa '. In this way, you can use a block inside the loop and the error in the log.

  I'm IN

  (SELECT username FROM dba_users WHERE username LIKE '% ABCFIRM')

  )

  LOOP

  BEGIN

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_coa; end;';

  EXECUTE immediate vstmt;

  vstmt: = "begin" | i.UserName | '. pkg_audit_info.p_load_am; end;';

  EXECUTE immediate vstmt;

  EXCEPTION

  WHILE OTHERS THEN

  --> Set the error in a table of otherwise custom event log you won't know what happened for this scheme: don't forget the user name

  END;

  END LOOP;

• To loop through all the values of a variable in ODI

  Hi all

  I have a table table1 with date fields in this

  Thus, the table will be something like

  Date_column

  January 1, 2014

  JANUARY 4, 2014

  JANUARY 5, 2014.

  I have a variable var1 declared in my project, which can take the values in this table.

  So the definition of the updating of the variable var1 is

  Select from table1 date_column.

  Now for each of these dates, I have to run a script, the script takes value of var1 date as a parameter.

  This must be run in a loop so that all the dates in the table may be covered.

  Could you please how this can be achieved in a package in ODI.

  Be able to find the solution for this: thanks to all the other post that helped me to get the solution.

• I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  iTunes: fix iPhone or iPod not detected Windows 10

• How can I return to my start page without scrolling through all the links I have open?

  In previous versions of Ff, I could go to a menu drop down and go back to my original home page (or another that I had opened) without having to scroll through all the links open back. I can't find a way to do it in 4.0.

  You can get the menu drop-down by clicking on the previous/next buttons or now the left key pressed until the list is displayed.

  If you want the drop-down arrow, you can add it with the add-on of dropmarker rear - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

• my sound keep disappearing. When I go to the volume control, it says no device installed. I have been through all the steps. How can I get my sound back?

  my sound keeps disappearing.  I go through all the help and support the steps but still no sound.  the volume control is all grey and says no audio device found.  but the Device Manager indicates that all is well.  What is the problem that I continue to have?

  Hello

  1. the troubleshooting steps are you referring?
  2. don't you make changes on the computer before this problem?

  The following article might be useful.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• I have xp pro I have activated telephone went through all the steps said active windows computing took me to the login screen, but when I try to log in, it tells me I have activated windows

  I have xp pro I have activated telephone went through all the steps said active windows computing took me to the login screen, but when I try to connect, it tells me that I need to activate windows so I click on activate the itr tells me that windows is already activated, then takes me in the newspaper and did the same thing

  To delete the message you are already enabled, you can force the activation on reboot. If the wpa.dbl and wpa.bak are damaged, they can cause a problem.
  Restart in 'Safe Mode '.
  Rename wpa.dbl and wpa.bak files located in the the\Windows\system32 folder
  Now, the message must be deleted, and you can now re-enable. TaurArian [MVP] 2005-2010 - Update Services

• E-mail allows you to see the most recent at the top, but now I have to look through all the emails to be received email today. How can I fix it?

  I DON'T KNOW WHY BUT MY MESSAGES IN MY INBOX ARE ALL MUDDLED UP.
  USED TO SEE THE MOST RECENT AT THE TOP NOW, I TUNED THROUGH ALL THE EMAILS TO FIND THE RECEIPT TODAY'S MAIL? Help, please.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-inbox-not-coming-up-by-most-recent/da345d0c-b33d-4722-92aa-45a36ad38e97

  Steve is of course correct.  What mail client do you have?

• Adobe web page that lists all the CS2 serial numbers?

  Lost my serial number CS2 web page URL. Can someone point me to the Adobe web page that lists all the CS2 serial numbers?

  You will need to re - install my copy of Acrobat.

  Hi INTP1000,

  If you have purchased from Adobe, you will be able to locate the serial key using this link find your serial number quickly. Make sure that you use the Adobe ID under which you have registered the product.

  Kind regards
  Nicos

• I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.  I want to make a collection of web.  I clicked on the tap WEB and then clicked on the button "Import" in the lower left.  All

  I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.

  I want to make a collection of web.  I clicked on the WEB site tab and then click on the button "Import" in the lower left.  All the images changed position.  Anyone know what I did wrong?

  Hi Peter,.

  If some how changed the order sorted, you can go back sorting to 'Added A order' in the toolbar.

  or, choose all the photos and click the view menu and sort to choose the sort order.

  Also, here is the tutorial link to learn more about creating web gallery in Lightroom:

  https://helpx.Adobe.com/Lightroom/help/creating-web-galleries-basic-workflow.html

  Kind regards

  Claes

• Where can I find my product key to 24 digits for Adobe CS6 Design and Web Premium? I went through all the normal download and a 19-digit serial number!

  Where can I find my product key to 24 digits for Adobe CS6 Design and Web Premium? I went through all the normal download and a 19-digit serial number! I had to buy a new hard drive from Apple, and when they were installed, I lost my programs. Help, please! Ive tried to download them for two days!

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Mylenium

• I went through all the steps to download the trial version of Adobe Photoshop elements 13. It is said download completed, but nothing happened then prompting to launch the program. I checked the finder (MAC OS) and could not find. Don't have Adobe downloa

  I went through all the steps to download the trial version of Adobe Photoshop elements 13. It is said download completed, but nothing happened then prompting to launch the program. I checked the finder (MAC OS) and could not find. Don't have Adobe download wizard. How to open and run the program?

  Jediii please see Photoshop elements 13 full download. What to do next? where this topic was just discussed.