to repair without losing data

Similar Questions

• Reinstall Vista without losing data.

  Trying to fix a friends laptop that has the following error: -.

  File windows\system32\configzsystem status: 0xc000000f

  Windows failed to load because the system registry file is missing or damaged. Can not do a Vista repair it still comes with the above error. I managed to get into the back through recovery cd and copied data via xcopy on external hard drive, so the user data are safe. Via back managed to discover that under system32 config directory is missing and so evrything under him. As I can't get into windows then try a patch upgrade is possible to install Vista without losing data or I have to do a clean install and then copy the data from the user throughout. CD I have is Dell reintallation Vista 32 bit SP1.

  Can you remove the hard drive from the laptop, if so, connect it to a desktop computer to extract the files.

  Note: Depending on the age of the laptop, you need a drive adapter.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can you convert disks on Windows 7 drives the external without losing data or the system perform?

  How do you write the command for the conversion of FAT32 disk to ntfs without losing data to an external drive in Windows 7 and how you can convert the local drive too?

  How do you write the command for the conversion of FAT32 disk to ntfs without losing data to an external drive in Windows 7 and how you can convert the local drive too?

  Convert a drive to NTFS does not fit.
  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-format
  (Vista/Windows 7 - it doesn't matter in this case).
   
  However, pay attention to this:
  "Although the risk of corruption or loss of data during a conversion are minimal, you must back up all data on the partition before you begin."
   
  Because something can and probably will happen.

• Can I restore without losing data?

  I don't have my Iphone saved on my computer. I need to get out of a boot loop, but I can't update. Is it possible to restore without losing any of my photos, music, etc.?

  You have a backup of iCloud? Or do you mean that you have no backup at all? Has not created a backup before attempting to update the device? Apple recommend a backup before doing any type of update iOS.

  Without a backup, you will lose data. You can recover from your last backup.

• How to recover a password administrator forgotten without losing data.

  I forgot my admin password on my desktop, a way to reset my password without losing all the data/files?

  Thank you.

  Here are the instructions of change or reset the password of a user account from OS X - Apple support

• Removal of the Amin on iMac without losing data.

  I am retiring at the end of the year and have need to back the rights of Admin of my iMac to my assistant. Can I do this without losing any data on my account that she needs access?

  Or can I just change the name of the Admin from mine to hers?

  Yes. Create a new account admin for it or have it better do so she can set her own username and password. Sign in to your account in order to transfer the files that she should have: transfer of files from one user to another account. Once the files are successfully transferred to sign out of your account. Have his newspaper his account where it can delete your old account. This is done in the preferences users and groups. Make sure what she does an immediate deletion and not a secure erase.

• Can I format the HARD drive without losing data?

  Hi all
  I used the restore CD to solve a problem on my system (blue screen) and everything was formatted... including the partition where I had music etc...

  Is it possible to format my hard drive without losing the data on the partition?

  Hi guys

  To my knowledge it s any recovery procedure, you would use; in both cases the drive HARD will be formatted!
  Using the disc using the Toshiba HDD recovery procedure and recovery HARD drive will be formatted and you will lose the data on the second partition too.

  As far as I know both put the laptop and HARD drive on the same State as on the first day of purchase!

• Satellite 1900-603: formatting the HARD drive without losing data

  Hello!

  I have a laptop of Pentecost 2 partitions in one, I have the OS and in others, I have my data, my problem is I want to format the partition with the operating system without losing my data, I intend to use for formatting recovery CD. Is this possible at all?

  Another question, I bought my laptop on the Switzerland but I am Portuguese is it possible to get an in Portuguese of toshiba recovery cd?

  Thank you

  Hi Rita

  It is of course possible.
  I assume that you installed your operating system on the first partition and all important files are placed on the second partition.
  The recovery procedure contains the standard and expert recovery mode recovery mode.
  You must choose expert mode. Here it should be possible to choose the partition where the OS image must be installed.

• move the Panel between monitors without losing data?

  I read here and here for help.  The best that I can deduct is to call SetSystemAttribute and change the ATTR_DEFAULT_MONITOR value before making a followed LoadPanel of a DisplayPanel.  Then to change the Panel of this monitor to the other, I have to call a DiscardPanel, then repeat the whole process.

  This changed with success my Panel of a second monitor.

  However, as soon as I throw the Panel, all the data control on this special group gets wiped.  So how do you change a monitor Panel to monitor without losing its data?

  According to the help:

  To open the panels on another monitor, call SetSystemAttribute to change the value of ATTR_DEFAULT_MONITOR before calling LoadPanel or DisplayPanel.

  I found is not exactly the case.  Repeat the call of the DisplayPanel just redraws the Panel.  Again, I must first close the Panel.  I tried a HidePanel instead, but it does not work.

  My group, I have a table of data.  I need it to stay resident while lighting the Panel between monitors.  Ideas?

  ElectroLund ha scritto:

  I think I'll just save me every row in the table and populates the table again after reloading of the Panel.

  It might be faster to duplicate control on a hidden side and duplicate and then again on the new main panel.

  (It is not an idea of mine: Luis gave him here)

• How to restore my OS to Vista without losing DATA or other programs?

  My Dell laptop sent to the Geek Squad because the keyboard went wrong. When I came back, they said they have updated the BIOS and recommended I have restore the operating system. I can do without losing other programs or data. If so, how?

  Hello

  With most of the recovery methods, probably not. Usually, they return a machine to factory condition, wipe all data on the drive in the process. You should consult the documentation for your system or with Dell support to see if there are other options.

  Unless you have insoluble problems, associated with the update of the BIOS, that said, there is no reason that you would need to reinstall. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How Upgade Windows 7 Starter to professional using the CD without losing data?

  My Samsung came with pre installed Windows 7 Starter. I bought the CD of Windows 7 Professional version. How to install this WITHOUT losing my existing data, WifI and Bluetooth settings? Thank you.

  You can upgrade without using your installation disc using the Express upgrade with your product key. All programs and files will remain on the computer.

  Upgrade Express using a key of already purchased the retail Pro/Ultimate

  In Windows 7, type Anytime Upgrade in search programs and files box on the start menu, and then click the Windows Anytime Upgrade.  From there, you can enter your product key of Windows 7 Professional of the retail (full or upgrade) and perform a simple upgrade. Online Anytime Upgrade is not available in all countries. All programs and files will remain on the computer, there is no drive necessary and it takes about 10 minutes.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  If you have a full key or upgrade of retail it will work with any time to upgrade. If you have an OEM key, academic key or Volume license key will not work with the Express upgrade.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Can I uninstall Windows XP and reinstall without losing data?

  I managed to destroy my XP installation so bad that I can't retrieve it using the original installation CD. can I uninstall and reinstall without losing all my backup files? Thanks for any help or advice

  Hi abbyhunt,

  See http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/how-to-format-a-windows-xp-computer-without-losing/654fe0ed-9e49-e011-8dfc-68b599b31bf5

• El capitan reinstall without losing data?

  I bought a used MacBook Air and El Capitan is installed.  There are funny behaviors and I want to see if a reinstall will help.  How can I reinstall the El Capitan withouth losing my data.

  Thank you

  David

  Reinstall El Capitan without erasing the drive

  HD recovery start: restart the computer after the ring, press on and hold down the COMMAND and R until the menu screen appears.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click first aid button in the toolbar. Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  
  

• can I reinstall ESXi 3.5 (u4) safely (without losing data warehouses)

  Good evening

  I use VMware Workstation for awhile but I'm pretty new in the world of Infrastructure. I'm trying to prove some things on a whitebox House before making a proposal to work. Thus, everything that follows describes my staff, from the production environment, no company

  In order to do things according to the needs, I'm juggling with live data between an old linux server, the new ESX host and my personal workstation.

  I installed ESXi 3.5u4 on the new host and things work perfectly. I p2v had the old server linux (with all its data) and it is solid as a rock. Life is happy.

  I now try to trap a promise 300tx4 and hotswap attached box from the old server and move them to the new server.  I am aware that it's not supported hardware, but I am struck the problem described here: http://communities.vmware.com/thread/186240

  I would like, before continuing a HCL card, try reinstalling under 3.5iu2. Otherwise, I would try disabling my onboard Controller (nForce) and just use the promise card.

  Since installing ESXi nukes the reader target, I know I'm losing this data store. Is there a way to preserve my other data warehouses, however? They remain available for addition/re-registration under the new facility? I have all supported and in security, but LeRiz, it would be REALLY annoying to have to rebuild that.

  Thanks in advance for your suggestions,

  DC

  Hello

  Yes, he should be all right.

  Make sure you just for the re - install that you keep the previous VMFS, otherwise you will lose your VM.

  Saludos,

  Jose Maria Gonzalez,

  -

• Thunderbird does not open after a crash; How to restore without losing data?

  Hello

  I tried to write an eMail with an attachment and Thunderbird did not no more. I closed it and tried to restart, but I got the error message that it was being used. I rebooted the computer twice, but still the same message. I then delete the 'profile.lock' files, but still no difference, except this error message does not come more.

  I use Windows 7 on an ASUS laptop.

  What can I do to fix the application and keep my E-mails?

  Thanks for you help,
  Wolfgang property

  ... still no difference, except that this error message does not come more.

  Well, that sounds like there is a difference. What happen now when you start Thunderbird?

  What is your anti-virus software?