Toggle battery in Z580

Similar Questions

• How to set up my battery Z580 settings to load completely?

  Hello

  I bought a new Lenovo Z580 this last June. Shortly after I started using it, a system message popped up telling me that since I often have my laptop plugged in, it might save battery if I let the system change my settings so that the battery does not charge completely - it would save the life of the battery in the long term, I would be free to change the setting whenever I wanted to. Well, that was the biggest mistake ever. I now basically have an office because I can't find a setting that allows me to change the battery is fully charged (it only charges 40 or 50%). There isn't any mention of this feature in the materials user guide I can find and none of these Options to allow me to change battery charge capacity. Help, please! I'm stuck with a 'portable' new which can barely be unplugged for an hour, and that's the most frustrating terrible adjustment I've ever seen in a computer. Thank you very much to all those who can help you.

  Cora

  Welcome
  The laptop automatically changed the setting for maximum lifetime of battery energy management. To change this, open the GUI of energy management. Then switch to the setting of the battery in order to optimize for the runtime. That should do it.

• Z580 battery (drivers or WIndows?)

  Greetings!

  I bought a laptop Lenovo Z580 and got the hard drive replaced with a samsung 830 series SSD (128 GB) with a new installation of W7, the store to the 750 GB hard drive in an external enclosure and I was all this at a very nice price. The laptop was awesome.

  But for the battery.

  From the first day I had only 1.5 to 2 hours on a full charge of battery problems. I did check the following:
  1. fact that all device drivers have been installed since Lenovo Web site (or hard drive OEM, depending on which were most recent file). I did this because the SSD had a fresh W7 install first.
  2. the fact that all the windows updates were installed
  3 Levono power management has been implemented fully charged battery mode Mode and not the protection of the battery (where the battery capacity is limited, less than 100%)

  Problem was not resolved. I called the store and they gave me a new battery, no questions asked. DIN can't solve the problem.

  Then they gave me a new laptop, with the SSD even put in. Did not work. It was two weeks in the purchase of the laptop.

  I asked them to put the old HDD 750GB thinking that maybe it is the SSD. Does not solve the problem. (At this point, the laptop was as good as out of the box and I did not know THAT SSD has not caused the problem). I don't want to ask money back because I need exactly this configuration in this laptop, and at the price I got it, it is not possible (at least in the Netherlands). In addition, he's exhausted. Apart from this problem, the laptop is perfect.

  During this time, I run the powercfg-energy and found a few USB devices not enter powersave mode. Output below:

  Errors

  Suspension device: USB USB not falling suspend
  The USB device is not in sleep state. Processor power management may be avoided if a USB device is not in sleep state when you are not using.
  Broadcom Bluetooth 4.0 USB device name
  Host controller ID PCI VEN_8086 & DEV_1E26
  Host controller location PCI bus 0, device 29, function 0
  Device ID USB\VID_0489 & PID_E032
  Port path 1.4
  Suspension device: USB USB not falling suspend
  The USB device is not in sleep state. Processor power management may be avoided if a USB device is not in sleep state when you are not using.
  USB Root Hub device name
  Host controller ID PCI VEN_8086 & DEV_1E26
  Host controller location PCI bus 0, device 29, function 0
  Device ID USB\VID_8086 & PID_1E26
  Path of the port
  Suspension device: USB USB not falling suspend
  The USB device is not in sleep state. Processor power management may be avoided if a USB device is not in sleep state when you are not using.
  Name of device Generic USB Hub
  Host controller ID PCI VEN_8086 & DEV_1E26
  Host controller location PCI bus 0, device 29, function 0
  Device ID USB\VID_8087 & PID_0024
  1 port way
  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%) 6.49

  I made the corrections mentioned on a few sites on the internet, and well, these things are now gone. Maybe the situation is better now, but now I get about 3 hours on a charge.

  I also noticed in the advanced power settings of all the profiles that the minimum CPU on the battery condition was 5%, I changed it to 0%. Why not.

  Now, the only thing that bothers me little is the continuous fan on the side of the laptop. That's all the time. Is this normal? Its not particularly noisy, but when I hold it to my ear, I can imagine the fan is very busy. I changed the "heat" to "Super silent" Managment and reduced noise and availability of the battery goes up to 4 hours. Still not here. I expect at least 6 hours for a new laptop.

  My gut feeling is something to do with the drivers (yet) or some problem of management of power between 4000 integrated graphics intel and nvidia chipset. In the BIOS, I can choose Optimus (both) or intel only. But ideally, I would use the nvidia gerforce and permanently turn off the intel 4000. How can I do safely? I don't want to go to the Device Manager and disable it. If my screen uses intel right here, its all gone then. Is it not?

  But before you go in this direction, am I missing something? How a Lenovo can offer only 4 hours of battery out of the box? Is the problem with my expectation?

  Hi all

  Detachment to close this thread - my problem seems to have been resolved.

  I'm not sure what it is resolved, but I did a number of things since then, including:

  -Reinstall the chipset drivers intel from the website of intel rather than the OEM folder given by Lenovo. They seem to be release late last month.

  -also updated the drivers from nvidia 630M - sequence also appears to have made a difference. I don't really know how it works maybe that wouldn't take a difference too, but I seem to be the case.

  -in the lenovo energy management, there is an option to disable disk when not in use. It is not given you an option after how long, but I turned on. No matter what.

  -in both mode balanced and power saver in the windows power settings, I changed the switch bank hard timeout to one minute. With 8 GB of RAM and page file reduced to 512 MB only, I don't think that my system needs read/write unless I have download/copy or sleep/hibernate implementation. It does nto creates problems with the disk access performance, at least not with my ssd.

  -in advanced power settings, changed the wifi to run on maximum energy savings. changed setting to maximum power save everywhere, I saw.

  -usb selective suspend has been activated. disabled, restarted. permit, rebooted.

  -same setting for graphics card intel

  Somethins must have worked. I get a nice 8 theoretical hours from the laptop now, almost 6 +.

  I guess I'm fine with it now. Problem was in the software. I do not have compalaints with WIn7, but I guess all said and done, he must do a better job to save energy.

• Z580 restore factory battery

  The port on my Z580 broke and I need to do a load factory reset to wipe my data I was sent a replacement and need to revert to the original. Is it possible to reset with the power of the battery? I'm short on time (and for free).

  Note of the moderator; subject edited to reflect the subject

  Thank you very much.

  This will examine.

  See you soon,.

  Doug.

• The yellow battery icon?

  the status of battery on my iPhone icon suddenly started showing in yellow. the phone is charging normally. I tried the telephone switching market. Anyone know if it's ok or it indicates a potential problem?

  Hi Lesleyjo

  The yellow icon says you had Low Power Mode active.

  You can disable it here:
  Settings > farm > Toggle Low Power Mode disabled

• Games lag on z580

  I have a z580

  Data sheet:

  Ci7 3612QM

  gt630m geforce 2 GB

  8gbram etc.

  Games work very well to figure high when it is plugged in, but when it's on battery, games lag even at medium settings and it's really bugging me upward, all solutions?

  Even if there is any application, windows does not run on high performance.

• Z580 DyingHDD, windows 8.1

  Hello

  I have a Z580 with a HARD drive that goes through a life ending experience. At present, it does not start. Although I salveged more data out of it, I want to start once more, in order to clone. I tried the repair tools, but they do not work. My repair disc refers to Windows 8, so this may explain why it does not work.

  I have access to msdn Windows Installer 8.1. I tried to use it to do a reset, but the reset function provides the message "media inserted is not valid" even if it is the x 64 version of the disc. I am at a loss of how to proceed.

  Any suggestions?

  How all he has not worked so far, I'm reluctant to do a complete reinstall until I got out of the BIOS product key, but all the notes that I find on this subject are running windows applications for this, clearly something I can't at the moment.

  Regarding the replacement of the HARD disk, I can simply clone the HDD to work (assuming I have make it work) and then just replace it or is there anything else I need to worry. I browsed the forum but most of the debates seem to relate to the pre-Windows 8.1 operating system.

  Thank you

  Thanks Len, it is logical, but it does not work like that. There is too much intermediaries and you must have exactly the right one. I did not, but he has not made a difference: the HARD disk was already too far gone. I could even install the new version of 8.1 on a new installation. Installation is dead 45% thru.

  Went out this morning, for $110 CDN bought a new 1 TB drive, installed and did a new install. E-mail works like some other critical applications. Now, I need to find a way to get some of this stuff Lenovo back beautiful (especially liked the app mgmt of life of battery and want to rebuild the partition OKR). but that's for later. time to get back to work!

• Lenovo IdeaPad Z580 - delay issue - help

  Hello

  I have a problem with my Lenovi Ideapad Z580. Below you can see the hardware specifications.

  My problem is that this laptop is trolling (freezing) whenever I run movies, listen to music, youtube, basically while doing anything.

  It happens randomly, lasts only for a few moments (like a sound of frying). I do not have to restart the computer, but it's very annoying and concerning, in particular because that machine is only a few months old and I would say, very powerful.

  Just to give you some information regarding what I tried so far:

  -J' checked the processes in the task each time that takes place behind Manager > I have not noticed any problem. I mean, use of CPU, disk use etc. are all aged 30-40-50% (if not less)

  -Check if the laptop is overheating - 100% not the case, laptop is cold temperature. I had a similar problem on my old Acer that was overheating, so I would like to know if this is the problem

  -J' ran virus scan-let me say that this computer came installed with security McAffee, I turned off and installed Avast (free), I read that McAffee can cause the problem of wireless connection (that I had also...)

  -Updated Nvidia card drivers

  Any help, advice would be appreciated, I'm getting more and more concerned about this issue.

  Lenovo
  Weight of the order of the day	6-2. kg
  Dimensions of the product	25 x 37.6 x 3,3 cm
  Batteries	1 battery batteries not required standard. (included)
  Model number of point	M81GCUK
  Color	Gunmetal
  Screen size	15.6-inch
  The processor brand	Intel
  Type of processor	Intel Core i5
  Processor speed	2.5 GHz
  The RAM size	8 GB
  Computer memory type	DDR3 SDRAM
  Size of the hard drive	1000 GB
  Graphics card description	1 GB Nvidia
  Type of graphics RAM	VRAM
  Size of Ram graphics card	1024 MB
  Operating system	Windows 8
  Weight of the lithium battery	1.4 kg

  Hello

  I'm still not completely sure, but it seems that my problem can be solved. I keep will monitor the situation and meet again in the coming days.

  I read everything I found on this topic (late) and found some additional advice on what could be done and I tried all the:

  -Downloaded video drivers (Nvidia and Intel) support from Lenovo (the last time I think that I've updated only Nvidia)

  -Plan of energy change / mode, from balanced to High Performance

  -Option used to remove dust from the fan (fron Lenovo Energy Management)

  -Computer reloaded

  After the steps above, I looked at a few hours of videos and I have not experienced any slow response, I just hope that it will stick.

  As I said, I will come back in a few days with your comments.

• remove the battery

  Is there a vdeo or is it a set of instructions to remove the battery from the Pavilion dm4-1160us model?

  There is a toggle switch that slips, but I can't remove the Panel!

  Thank you!

  Thanks to all... I took it out!

• Battery to reboot a stand-alone switch

  Hello:

  I have a Cisco WS-C2960S-48TD-L with 12.2 (55) SE2.

  It is not a standalone switch, battery and with no order it restarts automatically looking for a new election of master. Logging I have nothing, but connected with the console cable, I see after 2 minutes do not show anything what follows:

  Waiting in the elections of the Stack Master...

  ...

  The switch restarts and:

  ...

  * 00:00:12.289 Mar 1: reading env - LICENSE_BOOT_LEVEL = variable

  * 00:00:12.949 Mar 1: % IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: name of the Module = restart level according to lanbase and License = lanbase = c2960s_lanbase

  * 00:02:02.342 Mar 1: % STACKMGR-4-SWITCH_ADDED: 1 switch has been ADDED to the battery

  * 00:02:03.674 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, state change downstairs

  * 00:02:04.686 Mar 1: % SPANTREE-5-EXTENDED_SYSID: extended SysId enabled for type vlan

  I have no battery-cable connected, because it s not going to be another switch on battery. The previous state of the default configuration of the stack is:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 1 1 ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  After searching online, I have no seen anything to disable the functionality of the battery so I set the priority for the "switch 1" to 15 and set switches 2, 3 and 4, no provision, although this toggle Don t exist:

  #switch priority 1 SW_ACCESS (config) 15

  The priority of switch selector number 1 to 15

  Do you want to continue? [confirm]

  New priority has been correctly set

  SW_ACCESS (config) #no pass 2 supply

  SW_ACCESS (config) #no switch 3 available

  SW_ACCESS (config) #no switch 4 planned

  The State of the battery is the next right now:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 15 1 Ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  With this new Setup, the switch has rebooted again.

  Why on a stand-alone switch stack is restarted my system?

  Is it a function to turn off the battery?

  Thanks in advance

  SW_ACCESS uptime is 35 minutes
  System returned to ROM by power-on

  Looks like his power.

• Not found battery

  I have an off-warranty HPG60-235dx.  I just had to replace the battery, and then presented the message that the battery was plugged in and not charging.  I followed the instructions about uninstalling complaint ACPI battery, and now it will not reinstall.  Battery maintenance says there is no battery and I can't get the battery icon appears in the notification area.  When I click on customize, it is said the notification is not active, and it is greyed out in the page «toggle system icons»  I tried to stop, take the battery and cord, press and hold power for 30 seconds and restart only to batteries, but that did not help anything.  Any help would be greatly appreciated since this kind of makes me crazy!

  As you turn on the computer and you get a back looking for the configuration options screen, press F10.

  Manual

  See page 5-1. I see that there is no available test well of the battery. Try to run the battery down and see if it charges with the laptop. If so, then I'll try to reinstall Windows, and I think it will work.

• Battery, specifically in the night with ios10

  It happens to me all the time, when the night comes and I don my body with this sweet sleep, it's rough on my iPhone.  Really difficult.  I'll just go on my what happened to my phone last night...

  I went to bed around 01:30, my phone was 93%.  Here is a list of things that together did us before going to bed.

  -Set airplane mode because I get horrible service where I live, and I learned that that saves my battery

  -Closed all my apps

  -Night market

  These are normal things I do every night.  Do not forget that I have the app off background refresh and I have like 3 or 4 things in my widgets.  When I woke up just 6 hours and a half later, my phone had fallen to 59 percent.  Normally when I wake up and work all day and use the phone more (not much, I'm not a heavy user), I have no problem.  It's nighttime in general just when I have these problems.

  I had an iPhone before iOS 10 and 6, I had no problem with my other phone that my * service area, but I use call in wifi and FaceTime to correct this, if my phone is usually at home airplane mode.  Got a new iPhone 7 and who seemed to have no problems for 2 days, but now I'm back for the battery drain of night time making my iPhone 6.

  I doubt that is it because I don't see the problem often, but I think that my router is wrong and sometimes I lose the connection, but when the phone is in standby mode and I don't use it I doubt it would be the problem.  When I go to my use of the battery and check what is using what it says Facebook is 23%, and home and lock screen is only at 2% when it is clearly more 30% has been used yesterday evening.

  Any help would be appreciated, I'm fretting here!

  Facebook app is to drain the battery much. I would rather uninstall. But if you need it, there are a few tips to make energy not so consume: http://www.cultofmac.com/420508/stop-facebook-iphone-battery-drain/

  and also check out this article with advice general http://www.apple.com/batteries/maximizing-performance/

• Contact ID battery fast draining iPhone 5s does not

  5s fast drainage and Touch ID sinice 10.0.2 iOS iPhone battery update does not

  Restarted the iPhone since the update yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• iOS 10 battery drain

  Does anyone else have trouble with the life of the battery with iOS 10?

  I have a 5 c and I charge my iphone once per day if that.  Now its hollow when I get up morning so I charge it at work and also I have to recharge at night.

  I need this so because its not good for the trip. I'm going to Germany to visit family if I go in Brussels, I know that the airport has charging stations.  God forbid if I go to the United States to visit his family.

  Bluetooth is disabled. WiFi is on.

  is there something I can do? Any advice will be welcome.

  Thanks - danke schön

  Kimla

  First, plug in your iPhone, let the screen off and do nothing for a long period of time. Leave it plugged in all night while you sleep is perfect for that.

  Then, restart your iPhone by pressing and maintaining the sleep/wake and home buttons.

  You can also try following the suggestions of battery life. Go to settings > farm > find 'Suggestions of battery life.

  In addition, it is preferable to follow the Apple recommendations given in this article http://www.apple.com/batteries/maximizing-performance/