Tomb Raider II is lagging on Windows 7 64 bit

Similar Questions

• Get an ERROR OUT OF RANGE TABLE error when you try to run Tomb Raider: anniversary

  OP: ERROR: out of memory 2113236988 asking bytes (266701744 total free) _

  When I try to run the game (Tomb Raider: anniversary) I get this error message:
  'ERROR OUT OF BOUNDS OF THE ARRAY ".

  then at the bottom right of the window, there is a button saying "OUT OF ERROR RANGE of TABLE". clicking on it extends the window down, and he said:

  ERROR: Memory insufficient asking 2113236988 bytes (266701744 total free)

  Windows 7 64 bit

  Core i7 920

  6 GB of RAM

  ATI 4890 1 GB

  Hello Ferrari599,

  I see that there are compatibility issues known Tomb Raider: anniversary with Windows 7. I suggest that you try the methods below to resolve this issue.

  Method 1:

  Try to run the game in Windows Vista or Windows XP compatibility mode. You can check the link that will give you information on how to run the game in compatibility below mode: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Method 2:

  Also try to update the drivers for your graphics card. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Also ask your question to Edios forum to see if someone has had the same problem and found a solution:

  http://forums.eidosgames.com/forumdisplay.php?f=208

  Also try to change the resolution of your computer screen. You can check the link that will give you information about this below:

  http://support.eidosinteractive.com/index.php?_m=Knowledgebase&_A=viewarticle&KBArticleID=591&NAV=0, 981,1012,1013

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Tomb Raider Anniversary crashes at startup.

  I just purchased Lara Croft, Tomb raider anniversary of Microsoft games for Windows.le game starts the video intro and then Crashes.I checked the game through Microsoft secure, it indicates a driver I have not found any driver problem. I checked for drop in loads of site Web found nothing. does anyone else have this problem. I have windows 7 pro 32 Bit

  original title: Tomb Raider Anniversary

  Hello

  1. What is the accurate and complete error message you get?
  2. the problem only occurs with Tomb Raider?

  I suggest you try the steps from the following link:

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

• ERROR DURING THE GAME OF TOMB RAIDER

  just by playing the game of tomb raider on my laptop model-(dell inspiron 7420, core i5) he was suddenly arrested by itself.why? And what is more, my laptop is not even 1 month.

  My os is windows 7 Home premium, 64-bit and the graphics processor-2 gb nvidia ge force gt 640 m. and it breaks down every 5 minutes it gets stopped while I play!

  He appears on blue screen error?

  Run Windows Update and install all updates and update your game too.

  In games crash is usually caused by the graphics card and graphics card update could solve the problem, it is advisable to contact the game support too.

  Open Control Panel and check Action Center and see if there's any message there.

• What Windows 7 64-bit installation crashes with BSOD when you ask to Raid driver

  Original title: HP dv7 7008 own ssd install question.

  While he was trying to do a clean install of Windows 7 64 bit Ultimate built in 32gig ssd blocks on a 7B BSOD.  Tried to re - install the driver iastor.sys, intel RAID ultilty without success.

  I tried to restore to the factory but can't.  Can boot from image of Windows 7 on USB and try to re - install.  Installation asks for the driver that I provided and about 30 seconds later it BSOD.

  HP uses a 32gig like Accelerator HD SSD where the problem with the iastor.sys.  There is no option in the BIOS to what whatever relevant and I am at a loss.

  Don't want to send it back under warranty.

  Turned out to be a bad SSD returned and replaced with new ones.  Just glad to know I wasn't losing my mind.

• RESOLVED: External Volume RAID 5 TPG "split into two" once connected to the new Windows 7 64 bit install

  I have an AMS Venus T5J external drive enclosure (DS-2350J); It is filled with disks Western Digital 1 terabyte Caviar Green 5, model WD10EADS.  The device of Venus using a control panel with a JMicron JMB393 chipset, which is able to create RAID volumes to a connected host system transparently.  I used it to create a volume of 4 terabyte RAID 5 covering all five disks.  I've been accessing using a laptop Toshiba P105-S9337 with a card PCMCIA Vantec eSATA interface, which worked, but was not very effective.  Of course, it was necessary to structure the volume as TPG due to its size.  That has been a challenge.

  My primary system was Windows XP 32-bit installed, which does not support GPT disks.  I experimented with Ubuntu and another distribution of Linux, which supports the GPT, but ran into problems to mount the RAID 5 volume transparently (it may have partially been my inexperience, but it * should * have been easier).

  So I decided I have to install Windows 7 on this system, so that I could get access to this RAID her volume.  The system is based on an Asus M2N SLI Deluxe motherboard, which has an eSATA port integrated driven by a JMicron JMB363 chipset (NOT capable port multiplier).

  Windows 7 installation, installation of the JMicron driver for the motherboard and log box RAID, Windows little wanted to assign the 'disc' a new disk ID in order to to use.  I met regularly this process in the past without problems, when the new disks are presented on a Windows system, so I thought that anything that allows him to do.  However, has as expected making accessible existing volume.  After investigation, I discovered that Disk Manager believes that there is a space UNALLOCATED 1.67 TB and nothing more!

  At this point, I was naturally anxious, because I had data on the volume.  I checked the volume by connecting it to the laptop Windows 7 (32-bit) with whom he had previously worked and found a slightly different and more revealing image in disk management: there were TWO regions illustrated for the disk, an exactly 2 TB and the other TB to a 1.67, this last occupant clearly space greater than 2 TB.  These two regions, yet once, were listed as unallocated.  In both systems, Windows 7 was also clearly assumed the volume she TPMS, since the two I saw the option convert to GPT... which is already!

  That's happened?  Simply allowing Windows write a disc ID to this volume somehow corrupt?  How can I recover the previous volume of 3.67 unique TB who was present?  Should I just order in disk management to convert it to a GPT disk?  Is a non-destructive operation?

  I solved this problem with a perfect result...

  In short, I could use TestDisk to recover completely with all data intact original partition table.  It took several tries, several hours waiting for the paint to peel (scanning) and finally a brief dialogue with the proponent (Christophe Grenier).

• Windows 7 64 bit and AHCI support on DC7800 convertible minitour?

  Hi guys.

  I have an old HP DC7800 (it actually says DC7900 on the box, but several said firmwares is a dc7800 for some odd reason...) minitour convertible that I use at home, running Windows 7 Enterprise 64-bit.

  I put an SSD in this PC and when I went into the BIOS to find AHCI settings it shows only RAID and IDE.

  Now, I read about it in this forum and this guy is that he works with Intel Matrix Storage Manager (RAID drivers), but it was Windows Vista. However, I am on Windows 7.

  What I can find there are simply no drivers for this on Windows 7.

  Anyone have experience with this?

  Would be sweet to get this working...

  Thank you in advance.

  You are the very welcome.

  I did some basic research on SSDS and disk controller settings.

  I installed my first (and only) SSD in a HP Elitebook 6930p who owns the AHCI mode.

  I played with the idea of putting one in my dc7800 as you did and of course I would have had my speed on the RAID controller, but I found some interesting links I posted for your reading pleasure.

  Since you don't have the choice to choose AHCI, you would probably be OK in IDE mode if you find absolutely change the controller and reinstall the OS a real pain.

  http://archive.BenchmarkReviews.com/index.php?option=com_content & task = view & ID = 505 & Itemid = 38

  http://Forum.crucial.com/T5/solid-state-drives-SSD/is-IDE-or-AHCI-mode-better-for-single-SSDS/TD-p/9352

  Do some research on Google more.  There is a pretty good amount of links out there on this.

  For me, it would be more important to have a mechanical drive, set the RAID SSD RAID that supports native command queuing too, as far as I know.

  An SSD does not turn to find the data as a mechanical drive only.

  Here is an interesting link on the NCQ.

  http://en.Wikipedia.org/wiki/Native_Command_Queuing

  And here are the articles on the differences between the controller disc in general settings.

  http://www.differencebetween.NET/technology/difference-between-AHCI-and-IDE/

  http://www.differencebetween.NET/technology/difference-between-AHCI-and-RAID/

• Re: Satellite Pro L650-1QG drags terribly Windows 7 64 bit

  Hi all

  My Satellite Pro L650 1QG began trolling terribly (Windows 7, 64-bit, Service Pack): he often reacts delayed input (mouse clicks, opening new tabs in the browser, type the letters in Open Office etc.). LAGS are sometimes 3 to 5 seconds, sometimes more, sometimes less. In the meantime, cursor turns into 'swirling ring' - symbol. Video and Audio staggers sometimes playing for example Youtube-movies. This happens also in secure boot mode.

  -J' reinstalled Windows by Toshiba HDD Recovery.
  -Windows is up to date.
  -The drivers are up to date.
  -BIOS has been updated in March, as suggested by Toshiba. Everything went well for months after that.
  -Avira Antivir, Windows Defender and Spybot S & D show all hits
  -PC health show average temperature of the processor and the 'good' of the hard drive status
  -No fingerprint software is installed (which is suggested as a source of delays in the knowledge base)

  Do you know of any opportunity to identify the problem?

  Hello

  Try to update the TSRI as suggested here:

  Audio playback / video multimedia file is stuttering *.
  http://APS2.toshiba-tro.de/KB0/TSB12033I0001R01.htm

• Looking for Windows XP 64-bit Media Restore z800.

  I am looking to buy Windows XP 64 bit recovery media for work of z800. I searched the internet but I can not find a. HP store told me that they do not sell media of catering for XP. I buy Windows XP 64 - bit professional. I tried to install the operating system with the storage drivers and the blue machine screens. I am currently slip stream the drivers on a cd to boot, but that makes the machine bluescreen when it tries to load the storage drives.

  If anyone knows where I can get one please let me know.

  Thank you.

  Hello:

  The only place you can try is to call this number if you live in the USA/Canada.

  1-800-334-5144 you will need to have the serial number handy to give to the customer service rep.

  What is the name of the controller of storage used in your PC?

  If the setting of the controller is set to AHCI, here is the list of the supported drivers from the driver of the RST on the support page and the driver of your PC.

  . DeviceDesc PCI VEN_8086 & DEV_2681 & CC_0106 = 'Intel(r) ESB2 SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C1 & CC_0106 = "Intel ICH7R/DH SATA AHCI Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C5 & CC_0106 = "Intel(r) ICH7M/MDH SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_2821 & CC_0106 = "Intel(r) ICH8R/DH / SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_2829 & CC_0106 = "Intel(r) ICH8M-E/M SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_2922 & CC_0106 = "Intel(r) ICH9R / / DH SATA AHCI Controller".
  . DeviceDesc PCI VEN_8086 & DEV_2929 & CC_0106 = "Intel(r) ICH9M-E/M SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_3A02 & CC_0106 = "Intel(r) ICH10D / DO SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_3A22 & CC_0106 = 'Intel(r) ICH10R SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_3B29 & CC_0106 = 'Intel (r) 5 Series 4 Port SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_3B2F & CC_0106 = 'Intel (r) 5 Series 6 Port SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_3B22 & CC_0106 = "Intel (r) 5 Series/3400 Series SATA AHCI Controller '.

  If the command is set to RAID, here is the list of supported drivers...

  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = 'Intel(r) ESB2 SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5 Series/3400 Series SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID Controller '.

  If you see a name corresponding to the controller in your device manager, then XP x 64 should be able to install the drivers of "slipstreaming" I zipped and tied below or you can select the exact you need in the list by using a USB FDD, press the F6 key when asked if you need to install a storage controller, and then use the arrow keys up/down to scroll and select the specific driver that you are interested in.

  Scroll both directions because the driver you need may not be immediately visible on the screen when it first to the top.

• dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

  Hard to install Windows 7 32 bit on my desktop DC7800 SFF pc

  white screen - fixed (updated bios using back win98 & USB flash drive prep utility)

  installation white screen set (stopped using the dvd usb player & utilisΘ local DVD drive)

  Image DVD transferred to USB flash drive (always get this request)

  Downloaded and tried many drivers of different sites...

  Drivers, Software & Firmware for HP Compaq dc7800 Small Form Factor PC

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Intel ICH9 Chipset Driver for Microsoft Windows 7 - sp46869.exe

  It seems that nothing I try does not work.

  (always get this request for drivers)

  It has been a very long and tedious struggle day. I'm very tired and don't know where to look next to find answers...

  Any help this dispute would be really appreciated thanks.

  Well everything is solved and works well.

  Typing this from the newly built Office.

  Any Solution used (thanks to Paul Tikkanen to put me on the right track)

  (01)

  Update BIOS to fix a blank (black) screen during windows 7 Pro (32 bit) install on a hard drive (new & empty).

  Dc7800 SFF - Windows 7 drivers

  Update of firmware for HP 786F BIOS of computers with Intel processors families
  sp51245.exe

  I couldn't get this utility bootable CD version to work so had to turn to a USB bootable flash instead.

  Prepared the botable USB using - key USB W98 back Starter Kit

  (02)

  Downloaded the ISO from Microsoft file

  Windows 7 Professional with SP1 (32-bit)

  SW_DVD5_Win_Pro_7w_SP1_32BIT_English_-2_MLF_X17-59276. ISO
  Real Corsair Flash drive size - 2 377 506 KB - in windows Explorer
  Size: 2.26 GB - 2,434,566,144 bytes
  Size on disk: 2.26 GB - 2,434,596,864 bytes

  The file ISO of Windows 7 original instalation was certainly smaller that it should have been!

  (03)

  Burn the ISO on a 4.0 GB Corsair Flash drive using USB W7 Starter Kit

  New image details - Corsair 4 GB Flash Drive
  Size: 2.28 GB - 2,452,486,680 bytes
  Size on disk: 2.28 GB - 2,454,302,720 bytes
  873 files
  200 files

  (04)

  The installation went very well with only 2 issues of device driver initially...

  PCI Simple Communication controller
  Driver - Chipset
         Customer Manager Active Intel HECI Device Driver
  sp46137.exe
  PCI serial port
  Software - system management
          Intel AMT AMT 3.0 LMS_SOL
  sp46134.exe

  (05)

  I run one - SAPPHIRE HD 5450 1 GB DDR3 PCIE HDMI - Twin (DVI & VGA) graphics card

  First configuration - downloaded the drivers from the manufacturers Web site.

  On the installation of what I thought was the at and the latest driver, 2 problems...

  1 - the installation says that I needed .net Dot 4

  Downloaded and installed - Microsoft .NET Framework 4 (stand-alone Setup program)

  2 - the second test video driver installation is finished - but - screens flickered and flashed like crazy.

  I did correct anything that.

  Wiped the hard drive and run through the steps above.

  This time, making sure to use the original cd that came with the card of 2011. Result!

  PS - In the first leg through after installing windows successfully, I did all the updates of Windows 7.

  It took hours to download and install.

  Second time, I did not bother with the Windows updates immediately.

  Next step-

  3 future issues to be covered in the following threads

  (a) preparation of the utility of the technology Intel Management Acive - entirely private or disabled.

  (Do not need or want but hate having outstanding pilot flags in Device Manager).

  (b) the image of the hard drive and train you to restore boot partitions for multiboot Windows 7 installation.

  (c) work on a quick way to landslide-live stream the latest windows updates in the installation.

  Thanks for the help and I hope that some info above is useful.

  Advice on the high road (preferably free) partition SW of imagery to manage encrypted data of the partitions would be a good thing.

  Next thread?

• my HP Z600 (dual CPU Q5550 / Windows 7 64 bit) freezes 'stotters' with multitreading on

  Hello

  I have a HP Z600 (dual CPU Q5550 / Windows 7 64 bit / 260gtx /NVIDIA 6x4gb).

  When I activate multithreading in my bios (version 4 786 v01.17) my windows

  (using the application / web browsing) to become very unstable.

  It will freeze (stop responding for a few seconds).

  This goes on and on.

  is it because of my 1 TB Hitachi 7200 on HDD

  (all of these processors and son read write data)?

  I read somewhere that a raid or a SSD drive would be better than the drive in operation)?

  What is my settings (such as the bios disabled value Max for CPU to 3)?

  What is the HP Z600 known for this problem?

  I think it's possible because of virus/malware issues.

  Thank you very much

  All the best,

  FC

  Hello:

  You can also ask your question on the HP Business Support Forum - z section of workstations.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.UokYmdfnbGg

• Pavilion 15 ab108ax: Hp Pavilion 15 ab108ax windows 7 64-bit

  Hello, my laptop came with windows 10 preistalled. It was a kind of lag, so I installed windows 7 64-bit. My laptop has (amd a8 7410 apu with the processor with amd radeon r5 2.20 ghz graphics card). Please help me find the pilot network for windows 7 64 bit so I could install the rest of the required drivers that currently there are not have drivers in my laptop.

  Sorry

  http://Realtek-download.com/Realtek-PCIe-Fe-family-controller/

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Latency Wireless Windows 7 64 bit

  I was struggling with a strange problem with openvpn on Windows 7 64 bit wireless.  Performance is very slow and my ping is very high on the openvpn from Windows XP Win7 wired connections and wireless connection.

  This seems to be a problem with the Intel WiFi Link 1000 BGN wireless card.  No update firmware is available from Lenovo or Intel for the card.

  Average ping latency is 30ms WinXP vpn wired as well as Win7 wired and wireless.  But going to 130ms + Win7, connection Wi - Fi!  This translates into a remote session which is like working in molasses.  Walk through code in Visual Studio on a remote Windows 7 machine when computer on a wireless connection so much lag time, it becomes unusable.  To connect remotely on a wired ethernet or Wireless N WinXP is so sensitive that sitting in front of the remote computer.

  Seems that my MTU is optimal for my internet connection.  I tested and found that 1480 is the minimum size package where I can ping and return a response "packet needs to be fragmented but DF set.»  So I leave my MTU to 1500 on cable and wireless on Win7 machine.

  So far I have (I think) excluded the following:

  Firewall - the two windows and to the router - have turned both without effect

  Antivirus - no change with it disabled

  Configuration of the router - put the laptop in the DMZ and no change

  MTU - tested 1500 as optimum

  ThinkPad drivers and BIOS - all the latest

  Everyone meet problems with this Intel 1000 wireless card?

  Thank you

  Jeff

  ThinkPad Edge 14 with Intel 1000 BGN NIC wireless

  I had a real problem with performance on several ThinkPads with Win7 wireless until I realized there is a new (or perhaps changed implementation) setting in Win7 it affecting power.

  If you go to control panel-> Power Options, then click on "Change plan settings" for your current power management.

  On the next screen click "change power avancΘs."

  In the next screen expand 'Wireless adapter settings', then 'Power Saving Mode '.

  Make sure that it is set for maximum Performance.

  You do not know if this will help your particular problem but hope.

• I replaced my Windows 7 64-bit system drive and now I have the "Not genuine" message after an update failed

  I have a Windows 7 64-bit system I bought a provider on the local computer for a long time with Windows installed.

  I replaced my hard drives of 500 GB (mirrored RAID configuration) system with hard drives of 1 TB.

  After replacing the readers, I also installed a set of Windows updates. We update failed. After you restart the computer, I ran Windows update again. It seemed that all upgrades completed.

  HOWEVER, I now have the message "this computer is not running Genuine Windows". Windows Indexing is not running, send me problems in Outlook and elsewhere.

  I saw discussions on the online forum on the problem "Not genuine" resulting from an update of Windows failed and resulting also to change the hard drive.

  I led Activation (slui.exe 3) typed in the product key from the sticker on the computer and it activates OK but does not erase the message.

  I clicked on pay online now and ran legitcheck.hta and my system has failed validation. The options are to buy or to perform a new installation of Windows.

  I have a lot of programs installed on the computer, and I can't lose all configuration data and reinstall all programs. That would take several days and I would not have a system can be used in the meantime.

  I ran the Microsoft Genuine Advantage Diagnostic Tool (1.9.0027.0) and have these results below.

  There are a lot of files file mismatches and "tampered with". I believe that this is due to the update has failed.

  I thought to manually rerun all updates that goes back to the date when first I struggled (about a month). However, I wasn't sure if this solves the problem or make worse it.

  You can leave the data below what actions I need to take the next?

  I am a independent and use this computer to work. I have backups of my data files, but it is many installed applications that I can't do without.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - BJ6HF - KMG9Q-J439J
  Windows product key hash: 7vmpu6718rYAfG77 + 92w0F + H5ks =
  Windows product ID: 00371-OEM-9043973-76881
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {F07BA505-8A75-4DE1-A86D-1DE0A0C990B3} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Maxthon\Bin\Maxthon.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F07BA505-8A75-4DE1-A86D-1DE0A0C990B3}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-J439J00371-OEM-9043973-768813S-1-5-21-1148677520-472990491-2516340718Gigabyte Technology Co., Ltd.. EX58-UD4P Award Software International, Inc.. F8 20090511000000.000000 + 00055213107018400FE04090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00180-439-776881-02-1033-7601.0000-0992014
  Installation ID: 011105233533098330628726208714444670448455661326055071
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: J439J
  License status: initial grace period
  Time remaining: 40740 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 15/04/2014-15:56:27

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 4:15:2014 16:05
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: MgAAAAEAAAABAAEAAwACAAAAAgABAAEAHKKujALwWHXoY8KP8BfeiPKuALa26c6b6oI =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  EUDS GBT
  TAMG GBT GBT B0
  SSDT INTEL RCM PPM

  Hello Ray,

  Please provide a detailed description of your query.

  1. What are the troubleshooting steps you have tried?
  2. What exactly happens when you try to run "slui 3 '?

  The question may arise simply due to bad drivers from the Intel Rapid Storage Technology technology series. So, I suggest you to update the drivers Intel Rapid Storage from the following link.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapkw=Intel+rapid+storage

  In addition, please try to activate your Windows by phone, as described below:

  1. Click Startand in the search for box type: slui 4 and press ENTER.
  2. Select your home country.
  3. Select the phone activation option and brace yourself for a technical support representative get activated.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.