ERROR DURING THE GAME OF TOMB RAIDER

Similar Questions

• QTCore4.dll missing error during the game the sims 3

  Former title: QTCore4.dll

  recently, I tried to play my Sims3 game and got a pop up saying error QtCore4.dll is absent please re - install. I did some research on the assumption that it was a mistake of the Sims3 game. I read on some information about a lot of people receiving this error specifically.

  There are a lot of different solutions. Some sites say that I had to install this QtCore4.dll and would solve the problem. Although some people say that this worsens the problem. I decided to uninstall the game that has an alternative. Although this error always comes to the top.

  What can I do?

  Hello

   
  Qtcore4.dll belongs to EADM (Electronic Arts Download Manager) and should be in c:\Program Files\Electronic Arts\EADM directory (for 32-bit systems). If it is not there you will need to reinstall EADM (Electronic Arts Download Manager).
   
  Download new version from the link below and save it on the hard drive.
  http://eastore.EA.com/store/EA/HTML/pbPage.welcome...2caUcAAAAX&rests=1265212714560
   
  GOLD:
  http://support.EA.com/cgi-bin/EA.cfg/php/enduser/s...IG1hbmFnZXI * & p_li = & p_topview = 1
   
   
  Step 1.
  You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.
  Uninstall the old EADM of programs in Control Panel and install EADM (Electronic Arts Download Manager), you just download.
  
  For more information on uninstalling the programs under Windows, please refer to the link below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  Note: Restart the computer after uninstalling the old EADM to apply the changes.
   
  Step 2.
  Once the computer is restarted, and then install the new version of EADM that we just saved on the computer.
  See the article below on installing the programs.
  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program
   
  Here is the link for EA games support.
  http://thesims.EA.com/us/support/index.html
   
  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• during the game Dungeon Siege Broken World, it stops the game and I get the exception error

  Original title: exception errors

  during the game Dungeon Siege Broken World, it stops the game and I get the error of the exception that the program brings together except for the tour program off that I have to start

  Hi irishlaird,

  1. What is the full error message that you receive?

  2. did you of recent changes on the computer?

  Check out the links and try the steps mentioned below.

  http://garage.gaspowered.com/?q=node/9419

  http://garage.gaspowered.com/?q=node/6386

  http://garage.gaspowered.com/?q=node/5573

  http://garage.gaspowered.com/?q=node/5357

  If the previous step fails, then validate your request on the website of the game provider.

  http://garage.gaspowered.com/?q=Forum/169

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• screen freezes during the game, flashing white, go to the desktop, then flashes back to the game

  I need help to yall! So I had this problem when I play games, once from time to time the screen freezes, flashes white, go to the desktop and then back to the game. Seems to happen more frequently when a lot is happening at the same time during the game. I ran the windows performance test and return these errors

  Error

  Symptom: Device drivers are not installed. Cause: A driver has not been installed for this device to operate properly. Details: The device for Universal Serial Bus (USB) driver Controller has not been installed. This device won't be available until the appropriate device driver is installed. Resolution: 1. try to install the drivers using Windows Update. 2 install the drivers located on the installation media that came with the unit. 3. check with the manufacturer for an update pilot. Partners: Explanation of Error codes generated by Device Manager Symptom: Device is not present, not working not properly. or does not all its drivers installed. Cause: A device has a configuration problem that It prevents from functioning correctly. Details: The device, light WinpkFilter filter, report "tv_ConfigMgrErr24". This device won't be available before the question is resolved. The Plug and Play ID for this device is ROOT\LEGACY_NDISRD\0000. Resolution: 1. check that the correct driver is installed. 2. try updating the drivers using Windows Update. 3. check with the manufacturer for an update pilot. 4. try uninstalling and reinstalling the device by using Device Manager. Partners: Explanation of Error codes generated by Device Manager Manage devices in Windows

  I tried their update and uninstall the universal periodic publication of bus drivers. I don't know what to do about the other error. He also told me I need to more memory, but would not fix these errors.  If anyone can help I would really appreciate it!

  Manufacturer	BIOSTAR Group
  	Model	TA970
  	Total amount of system memory	8.00 GB OF RAM
  	Type of system	64-bit operating system
  	Number of processor carrots	4

  Type of view map NVIDIA GeForce GTX 750 Ti Total available graphics memory 5884 MB Dedicated graphics card memory 2048 MB Dedicated system memory 0 MB Shared system memory 3836 MB Graphics card driver Version 21.21.13.7270 Main monitor

  
  resolution 1920 x 1080 Version of DirectX DirectX

  Network card Realtek PCIe GBE Family Controller

  Thank you for coming back to us.

  It could be two or three reasons why you experience the problem regarding the World of Warcraft online game. Windows might need to install all important updates, there could be corrupted in the system, outdated driver files or the size of the memory.

  We suggest you to check and install all important Windows Update.

  If the problem persists you can update graphics cards via the Device Manager.

  • Press Windows key + R, type devmgmt.msc , and then click OK.
  • Double-click display adapters.
  • Double-click graphics card.
  • Click driver , and then select set to update driver.
  • You can select the following:
    • Automatically search for an updated driver.
    • Browse my computer for driver software.

  Let us know how it goes.

  Kind regards.

• Sync has encountered an error during the synchronization. Unknow error

  I get the following error message: 'Sync has encountered an error during the synchronization. Unknown error. Synchronize automatically retrying this action. "In addition, currently, my favorites are useless: I lost all my favorites and I can't add any new.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• My book for Mac 2015 becomes hot during the game.

  My MacBook 2015 becomes hot during the game. Is this a problem?

  Depends on heat, it gets. It is normal that some video games place a demand on the CPU and GPU, so you can keep track of the temperature. A good and free app for this is temperature monitor.

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• G505S overheating during the game

  I had the G505S for 2 days and have been using it to play Football Manager 2014. However twice during this period, he stopped because it has overheated. When I turn back the fan kicks in and a little heat serious out and dissipates after about 5 minutes.

  I downloaded HWMonitor indicating approximately 90 c at idle, however the AMD Overdrive program reports about 42 c idling.

  I just installed the latest updated BIOS and made the changes to this link (http://www.addictivetips.com/windows-tips/how-to-prevent-your-laptop-from-overheating-windows-7/) recommended to reduce the CPU power to 98% to stop overclocking, but is there anything else I should do? Is the faulty laptop fan is not kicking in and out to try to cool down during the game?

  Hi Phil,

  This is normal because the game is running and full GPU is used, if the temperature rises more than normal. I suggest to contact one of our authorized Service Center nearest you and make sure you use the laptop by placing it on a flat surface for proper ventilation.

  Publish us back for other queries.

  Best regards

  Shiva Kumar

• keyboard is as I am now a key and will not stop repeat during the game

  During the game on the internet keys I have insisted is "locked" and will continue to do the same operation repeatedly. How can I fix the problem?

  During the game on the internet keys I have insisted is "locked" and will continue to do the same operation repeatedly. How can I fix the problem?

  The keys on which?   For example, a common symptom is having some modifier keys seems to "stick" after they have been used in a repeat operation.   The solution is then to press and release the opposite modifier.   For example if a Ctrl key seems to be stuck and you know that you use RightCtrl - in a repeat operation, press and release - LeftCtrl.   Etc.

  FYI

  Robert Aldwinckle
  ---

• Vista crashes during the game

  my computer hangs and feezes during the game play, usually if IT a game that requires an internet connection.  Norton could be the cause?

  Thanks for your suggestion.  However, it seems that the problem was overheating of the GPU.  The problem stopped Océ I improved the ventilation and added a small fan.

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Try installing SAGE simply accounting error: "Error 1935. An our error during the installation of Assembly component

  Try to install simple SAGE accounting and the following error:

  "Error 1935. An our error during the installation of the Assembly {97F81AF1-0E47-DC99-A01F-C8B39A1E1873} HRESULT 0X80071A91 component. »

  After this error, I also receive this error:

  "Error: 1603 Fatal error during installation." Consult the help of Windows Installer (MSi.chm) or MSDN for more information.

  Anyone out there has any help with these errors?

  TKS!

  Hello

  1. are you able to install other programs?

  2. How are you trying to install?

   

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

  Method 2: You can also configure your computer in a clean boot state, and then try to install it.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Error during the full backup of the system Vista "Media is not UDF.

  Original title: error during the full backup of the system Vista "Media is not UDF" I tried CD - R and DVD + R

  I just finished day three re - build with all the latest updates and now I want an IMAGE backup to recover from.  When I run Backup asked that media... suggest a label for the DVD but I get the error 'Media is not UDF' end there...

  Also if I back up to another hard drive on my system can recover from this Image?

  Thank you!

  Ken D

  Hello

  backup on an external hard drive or DVD

  the 1st link below is how do the backup of the complete computer for the company, ultimate and vista business

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.