Too small UI and interface scaling user does not seem to do anything

Similar Questions

• I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)

  I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)

  Any suggestions apart from simply all formatting?

  Hello

  Exploit: Win32 / Pdfjsc.Dr
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=exploit%3aWin32%2fPdfjsc.Dr

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I wonder to update and the updated Panel does not seem to connect to your server

  The Panel is repeated.
  Once I click on the button update moving blue line appears and nothing more and the minutes.
  Also the 'hide' button does not work

  If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

  Download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 29.0.1: http://www.mozilla.org/en-US/firefox/all.html
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Compress files old option in the disk cleanup tool does not seem to do anything

  original title: compress old files

  How to compress old files? When I run Disk Cleanup, the compress old files is checked, but the cleaning does not remove the 13, 464KO here. How can I get rid of this?

  Hello

  http://www.ehow.com/facts_6010913_can-old-files-disk-cleanup_.html

  Compress old files

  • This option, which is the only option that does not remove the files, compresses the files on the operating system that have not been consulted after a certain period of time. The files are not deleted, but simply compressed into a smaller size since they are not used and are accessible by the operating system if they are needed once more.

• "Do you want to save changes...". "does not seem to do anything?

  I have a site that offers interactive content for PDF users.  My site is configured to force a prompt open/save to a PDF file instead of let the browser decide how to deal with them (i.e. open in browser "Preview").  However, here's the question:

  When a user "opens" a PDF / amendments to it and simply closes the file PDF, Reader/Acrobat prompt the user in the dialog box "do you want to save changes to...". ».  However, when you click on 'Save', the dialog box deadline there is no prompt to choose where she must be registered in.  Open Reader/Acrobat directly does not display the "saved" as a recent document, either document.

  I was able to reproduce this issue on three different devices.  Is this a known bug?

  Haven't tried what you're doing, but normally save just done this. What you want is to save it under. I assume you are using a form any JavaScript or an action button. See if the button or script can be changed to save as. The just Save saves the current file (often in the TEMP folder).

• I am very sorry for my experience of care and I need help from someone, because Apple does not seem to do anything.

  Whenever I try to buy anything from iTunes, he told me that my card was declined and I need to update my billing information, but the information is up-to-date and accurate. I tried to access Apple support by all means. I tried the chat system, but was immediately struck with a code error and rerouted. Then I tried to send, but it refused to let me email without an order number, but I can't HAVE a purchase order number if iTunes won't let me make an order! Then I tried to send my number so they could call me, but I got the same error as the chat system code and has been diverted again. Finally I went to the contact section to find a direct number and I called the Apple Media Helpline. Replied to automated email and when I asked to be put through a representative, the message says he understands and was changing me but as soon as he transferred it was yet ANOTHER automated message that just told me to go to the online support page, and then he hung up!

  This is outrageous. How the world am I supposed to get help with anything that either if no support really offer any type of support? The Apple store nearest is 2 hours and I won't make this drive on something that I know can be fixed with a simple phone call.

  I really, really need some help here. Please and thank you.

  What are you trying to use your payment method, credit or debit card? If it is a debit card, not all still seem to be accepted and could not be accepted at all in some countries.

  A card having a chance to be accepted it must be registered with the same name and address (including the format and spacing etc) that you have on your iTunes account and have been issued by a bank in the country where you are (and therefore the country on your iTunes account). If your card is then you have checked with the card issuer to see if they are down for use with iTunes? If they are not then you have another card you could try? Or though iTunes gift cards available in your country so that you can use them as payment?

• I have a Hi - quality laptop computer which, for some reason, the cd/dvd drive does not seem to run anything either just begins to spin and stop to stop anyone can help?

  I tried to load several games I've played on this computer in the past, but now, it won't record the CD are in, it just keeps asking for me to put the cd. I tried a cleaning upward and uninstalled the program now, it will not install because it can not find the disc. Help, please!

  Try running fix:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  If this work try another challenge it:
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  You can also make manual correction under "Let me fix it myself" Windows Vista

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• Model test using the interface user does not appear in the user interface

  I created a user interface for a model and trying to test it (using the model to test > start a new configuration > model UI (select user interface) > finish), it does not have the user interface, instead, it shows the summary of Configuration page. I checked the user interface, and there the correctly defined page flow. What is the reason for this and what is the solution. Thanks in advance.

  Check if you have associated page flow to the UI or not. Can be done in the edit page of the user interface.
  Check if you have added a page active in pageflow or not.
  Also make sure that you have visible page - page display of page condition is true.

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to be change

  Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to change.

  Hi Khushboo,

  On the bottom of the page of Adobe, you will see an option to change the region, make sure that you have the United States he and on the purchase page to change your currency to the U.S. dollar as well.

  Let me know if it helps.

  Concerning

  Sarika

• I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use an access point

  I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use a mac apple OS10.6.8 and the browser chrome. can anyone help please?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• When I use Windows Maovie Maker, the program keeps freezing upwards and says that it does not.

  When I use Windows Maovie Maker, the program keeps freezing upwards and says that it does not. I close and try again, but get the same question. in the past, I used this program very well without any problem. Now I do one or two things in the tyring program to create a video and it freezes. Any suggestions how I can fix this problem?

  The three main causes of problems of Movie Maker are:

  (1) incompatible or damaged source files.
  (Photos / videos / Audio clips)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  (2) problems with video filters

  Open Movie Maker and go... Tools / Options /.
  Compatibility tab and disable all filters / OK.

  If this does not help, try going back to the same
  location and on the left, click on the 'all the default settings.
  button. / OK.

  (3) too large or complex project

  Create small projects.
  Add less Transitions, effects, etc...

• The element of Interaction of the user does not correct my Boolean attribute value

  Hello

  I'm just starting using the element of User Interaction. In my workflow, I set several attributes - some string and a Boolean value. I have a script task that makes treatment and eventually set these attributes. I then a piece of User Interaction that has these characteristics than external contributions. The Interaction of the user unit shows the correct values to strings, but the Boolean value is always shown as wrong - regardless of what I put the attribute in the script task immediately preceding.

  I'm confused. I plugged everything in the binding in the same way, but it does not seem to reflect the State of the attribute. I can switch the Boolean value in the Interaction of the user and the attribute is replaced as expected.

  Thank you

  Edit: I have reproduced this issue with a very simple affair. Make a new workflow and put only a part of the Interaction of the user in it. In the UI element, create an external of entry as a Boolean attribute of the workflow. Default font to True/Yes. When you run the workflow, the user interface element shows the value as a no.?

  Hello

  Looks like a bug in the client Java vRO (but works in vSphere client to Web). I am able to reproduce it in my environment, on the two vRO 6.x and 7.0.

  I'll open a PR in order to track and remedy in the future vRO releases.

  BTW, I vaguely remember there is a reported similar problem long time for vCO 4.x. It seems that the problem has reappeared again in silence

• Move the task to process Iplanet user does not

  Hello
  
  When I'm by assigning a new organization to the user through the user interface, then the user does not move the body selected through the user interface.
  I checked the history of the resource and it shows that the task "Move user" process got triggered but the status of the task is rejected.
  
  I get after the logs on the Console of the IOM:
  
  USEXLORG running
  Target the class java.lang.String =
  Running ISSSL
  Target the class java.lang.String =
  MODIFYUSER running
  Target class = com.thortech.xl.integration.iplanet.tcUtilIPlanetUserOperations
  < 2 November 2012 15:11:32 IST > < WARNING > < oracle.iam.callbacks.common > < ARA-2030146 > < [CALLBACKMSG] are present for this eventhandler async to policies?
  : false >
  USEXLORG running
  Target the class java.lang.String =
  Running ISSSL
  Target the class java.lang.String =
  Running MOVEUSER
  Target class = com.thortech.xl.integration.iplanet.tcUtilIPlanetUserOperations
  < 2 November 2012 15:11:33 IST > < error > < XL_INTG. SJSDS > < BEA-000000 > < =.
  =======================================>
  < 2 November 2012 15:11:33 IST > < error > < XL_INTG. SJSDS > < BEA-000000 > < com.thortech.xl.integration.iplanet.util.tcUtilLDAPOperations: createObject(): impossible
  Create the object [LDAP: error code 68 - entry already exists] >
  < 2 November 2012 15:11:33 IST > < error > < XL_INTG. SJSDS > < BEA-000000 > < =.
  >
  
  -----------------------------------------------------------------------------------------------------------
  
  Please suggest what is causing this problem and how to fix it.
  
  Thank you

  The processInstanceKey can be found while performing the mapping :---> map

  Data processing--> of Process Instance

  Even the user key can be found just by running the adapter mapping: -.

  Definition of user--> user key

  Or the best approach would be:-create a process task adapter for the transfer of the ORGANIZATIONAL unit of the profile to your process... It is a generic and commonly known adapter as a transfer card:-

  How to create a transfer adapter: -.

  Name of the adapter:-adapter task of transfer process
  Adapter type:-treat stains
  Description:-adapter task of transfer process
  Variable:-determination of entry (of Type String) during execution
  Task of the adapter:-logical task... Adapter--> Variable defined return value--> entry
  Save... Build... Compile...
  For example, you have created your adapter generic transfer...

  Suppose that your new ORGANIZATIONAL unit is stored in the USR_UDF_NEW_OU field.

  In research, USR_PROCESS_TRIGGERS, give entry: -.
  USR_UDF_NEW_OU change of ORGANIZATIONAL unit

  In "iPlanet user" process definition, create a task to '' change OR... Set the task to transfer adapter process...

  entry--> user definition--> OU
  Return value from adapter--> process data--> organization name...

  It's a great way to convey the new OU of the user profile to process data name of the Organization, without writing any custom code