Satellite L300 did not initialize properly after installation of MS Word

Similar Questions

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• CS6 Indesign does not work properly after installation: "component Windows is missing."

  The program starts and loads the files correctly. However, the menu options are unavailable (tone do not react when I pass the mouse over it): basic stuff like text-centering, size of font and others do not work.

  have disinstalled, run CC-Cleaner and reinstalled already, but no improvement.

  run Indesign also on another device, and there works allright.

  Thinking that, too, but I wanted to check everything first. In any case the link is InDesign tools and panels meet not the clicks of the mouse (Windows 7/Vista)

• My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

  My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

  If you have installed the Seagate Software, please delete and see if there is no change.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

• I get an error saying: "WSOCK32.dll does not work properly" after playing a game on a web site.

  Hey, I'm using windows XP on my IBM thinkpad T40.

  I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.
  It is sending a bunch of errors at startup and saying things are corrupt.
  I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!
  Please help me...
  original title: WSOCK32.dll errors

  Hello

  -What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?
  -What are the exact error messages / complete that appears at startup?
   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1: I suggest you perform the steps from the link below and check if it helps.
  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
  http://support.Microsoft.com/kb/811259
   
  Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Hope this information helps.

• Setup error Application-"the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. »

  Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond.  I'm not as technical as most of you, but I am unable to even get the software to install.  I get an application error installation "the application could not initialize properly (Oxc0000135).  Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP.  Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...

  Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• the Task Manager won't start don't no error "the application could not initialize properly (0xc0000006.

  I've heard fans speed medium speed and high when I don't do anything that would require heavy resources. I tried the two Ctrl-alt-delete and right-click in the taskbar, and it fails to start. "The application could not initialize properly (0xc0000006). Click OK to close the application. "I click OK and it pops up again and then I click OK again and it goes.

  I ran AVG and Spybot in safe mode with network but nothing detected... and you erased my memory of page file also.
  It is simply damaged or make me a bug/virus.
  HP D220 desktop model

  Ok. What I wanted to say, this is so that YOU can see the file, you must be able to view hidden and system files. Windows will however see the file any if YOU can see it or not.

  In autoruns, in my opinion, you have not clicked on 'options', then 'Filter Options '.
  Make sure that all check boxes are cleared in 'Filter Options '.

  Tomorrow, I would like for you to delete infected tasks Manager by HP. And copy the Dell2 for HP-infected Task Manager. Just in case the task manager has been infected and start actually malware.

  So, tomorrow,

  -Alex

• lsasss.exe - application error "the application could not initialize properly (0xc0000006).

  Hi I was wondering if someone out there could help,

  My laptop is a packard bell Windows xp, when I turn on the laptop it does not completely load, it will take me to a black screen with the error message error lsasss.exe - request "the application could not initialize properly (0xc0000006). Click OK to close the application. But when I click ok nothing happens except disappears from the message bar and im left with a black screen. can someone tell me what to do?

  Hi beavarney,

  ·        Do you remember any changes made on your computer before the show?

  Security Authority Subsystem Service LSASS (local), is a process in Microsoft Windows operating systems that is responsible for enforcing the security policy on the system.

  Method 1:

  I suggest to start the computer in safe mode, you can check the link for the steps below: a description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Method 2:

  If you are unable to start the computer in safe mode then try last known good configuration. Link: How to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install yahoo mesengerand it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?

  I try to install Yahoo Mesenger and it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?

  Hello DennisUSMC,

  Look at the thread in Yahoo Answers.
  http://UK.answers.Yahoo.com/question/index?QID=20091129190055AA1nEsp

  He suggested to uninstall other versions of Yahoo messenger before installing the latest version. If it does not help to solve your problem, then go to Yahoo support.
  http://help.Yahoo.com/kb/index?locale=en_US&page=product&y=PROD_MSNG&PIR=qWKr06VibUkWf.Qpynpw1MiIKLy_mnW1Xh_iz.es9b2DJRQQvLHTQmI

  Sincerely,

  Marilyn

• Phone of blackBerry Smartphones does not work properly after upgrading Poynt

  Hello.

  Yesterday, I upgraded my poynt app, which seems to have causes all types of problems with my phone.

  (1) my email account icons have all disappeared, although it recognizes new messages, I can't access it.

  (2) the device does not allow me to access my texts all the time as well, and I get errors such as:

  Eception exception: application_net_rim_bb_message_app (231) does not.  I had the same message with several different numbers.

  I also have java.null messages, even if it is rare and I don't remember the exact error.

  (3) desktop manager cannot access the device, it does not allow me to backup my data.

  (4) I tried to reload the os, and applications but it fails because it cannot back up data...

  I'm lost and can't seem to find help on the net for this, and at this point, I want to just wipe the slate and start over from scratch.  Maybe completely reload the software or something.  I have most of my contact information on my sim card from my previous phone, data loss would be minimal...

  can someone help me please understand what to do.

  Info on the device

  Your carrier: att

  Model information and the version of the OS (go to settings, then Options, then):

  8900 v4.6.1.231 platform 4.2.0.108

  Apps and free space

  hard battery pull did not.

  Installed apps and their version if possible.  I have several apps installed:

  Poynt, bloomberg, score, xenozu, facebook, bablphone, CBS Spanish football, dictionary.com, anchor.  all are the latest versions, except for some reason any phone does not recognize that I have the latest version of home.

  but the last poynt update caused this, and I have already deleted poynt.

  Thanks in advance for your help.

  Thanks for your help.  So a question I had was that my camera was unable to save all the data, and therefore loader did not work properly.  I read somewhere that you can stop the car to the top, did this and reloaded the new os.  I think that things are finally working

  Thanks again for your help.

• I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  You accidentally type in a redemption code when he says he only wants a serial number?

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Satellite L50-A-111: dimming does not work properly after Win 8.1 upgrade

  Hello

  I have a problem with my laptop computer truebright LED monitor.
  Brightness works correctly, but the brightness variation is not.

  I should be able to choose from a range of 0 to 100% in both, but in gradation brightness that I can not only get up to 10% even though it says its 100%
  because when I level down it says 8,6,5,3,1 level and 0 when I get home eco and when I max he says 10% for 1 second, then 100%.

  Oh and something important, change the brightness variation has no effect at all, I think it's just stuck at 10%.

  But I know clearly that it is 10%.
  I tried everything so far, restore archive and the registry.
  It wasn't even until I restored the registry. I also tried advanced options that once solved this problem for me, tried everything, expect to reinstall the operating system.

  I installed windows 8.1 Windows store recently I don't know if its related.
  All my drivers are up to date.
  Happened yesterday after Batman Arkham City GOTY installing and disabling the Anti Virus, Firewall, etc...

  I don't know what else to try, im really frustrated, I can't handle this without the gradation of light at its maximum. My only concern is to reinstall the operating system did not solve my problems.

  Please give me some info on how to solve this problem, I'll try the registry if someone can help out me.
  Thank you in advance.

  My best regards,

  Sir. º Micael liberal

  Hello

  To be honest I m a bit confused.

  You said that you have upgraded to Win 8.1
  After these updates, you must update all the Toshiba drivers as mentioned on the 8.1 win Toshiba upgrade page.
  On the page of the Toshiba UE driver you can find the installation instructions that will show you how to install / update all drivers.

  This is very important!