ToolTip widget on touchscreen device

Similar Questions

• Is it possible to create some custom shapes in the form of buttons for the composition of ToolTip widget?

  Basically, I have a collection of triangular shapes (orange cross section), and I want each segment/triangle is a thing of button ToolTip. So if you hover over a triangle it changes color and text appears below the orange itself. But the ToolTip widget composition seems limited to a form of square/rectangle for the container of button (I can put my image of triangle inside, but not change a square container).

  Any help? Picture below shows what I'm trying to achieve, the segment is red to show the form that I want.

  Thank you

  Currently, it is not possible with only Muse. Should the graphics cards that are not supported. Your best plan would be to create as a composition of edge animate and then add it to the Muse.

• Widget slideshow full screen with the ToolTip widget

  Hello!

  I'm Muse learning and building my own portfolio site to scroll down a page.

  http://nsfun.BusinessCatalyst.com/index.html#cargo

  During the portion of the cargo, I need a 100% with the slide show with the unique tips and buttons on each slide.

  I tried 2 different solutions, but none of them works:

  1. full screen slide show widget, but it is not allowed to combine with the ToolTip widget

  2. blank publication widget. It is possible to combine with the ToolTip widget, but I can't set it to 100% width and a little hard to hide thumbnails

  I'm happy to walk there is a solution for this problem. I would be happy to buy a paid so widget if this helps

  Thanks for your help!

  You can use the composition for this slideshow does not allow to insert elements, whose composition, you can resize the container so that it should cover the area 100% page rendering in browsers.

  You can also check these options:

  http://musewidgets.com/collections/all/slideshow

  Thank you

  Sanjit

• Problem loading image in the ToolTip widget

  I have the ToolTip widget on and clicked on until the Image frame, but how to replace the image with mine? At this level, when I go to the Menu to fill out all of the options are grayed out. Yet I do not see a "load image" in the dialog of the widget.  Y at - it another way in this container of the widget? thnx

  Hello

  You have several options: you can "re-edit" the image in the palette of assets, or you can remove the placeholder image and paste your own as described in http://www.adobekb.com/typography_pt3.html (text wrapping around a picture in a block of text)

  Abhishek

• Screenshot using touchscreen devices

  Hello friends,

  I and requirement to capture the screenshot of blackberry. I can do this using the class net.rim.device.api.system.Display as follows:

  Bitmap screenBitmap=new Bitmap(Display.getWidth(),Display.getHeight());
  Display.screenshot(screenBitmap);
  

  But in the case of devices with touchscreen when the on-screen keyboard is visible the code above only takes the screenshot of the screen above the on-screen keyboard and not to take the screen shot of the on-screen keyboard.

  So I ask your valuable comments on how I can get the screenshot of the full screen, including the on-screen keyboard when it is visible.

  Thanks and greetings

  Ludovic P

  Hello Michael, thank you very much, the code you posted has worked perfectly

  I've never looked on this method.

  Thanks a lot again

• Anychart graphic links on touchscreen device

  The two graphs on this page have defined links when you click on a piece of pie.

  https://Apex.Oracle.com/pls/Apex/f?p=32532:5

  The first fills the field using javascript

  SELECT 'javascript:$s("P5_ENAME","'||ename||'");' LINK,
         ENAME LABEL,
         SAL VALUE
  FROM   EMP
  ORDER  BY ENAME
  

  The second via a link to the apex page

  SELECT 'f?p='||:APP_ID||':5:'||:APP_SESSION||'::::P5_ENAME_COPY:'||ename LINK,
         ENAME LABEL,
         SAL VALUE
  FROM   EMP
  ORDER  BY ENAME
  

  Both work as expected on the desktop, but on a touch device (for example: iPad), click on the pie just displays ToolTip.

  This sounds like it might be the expected behavior, but I was wondering how it could be set so it will honor the link?

  Custom XML?

  Difficulties in finding people asking the same question.

  Hi Scott,.

  AnyChart confirmed that there is indeed a bug with the handling of events, depending on the mobile device in use.  I have connected the #22820793 bug to track this issue and we hope to receive an AnyChart fix for integration in our next release.  My apologies for any inconvenience this may cause you and your customers.

  Kind regards

  Hilary

• Add hyperlinks to the ToolTip widget in the muse?

  Ok. Here's an interesting question.

  1. I added the tool tip widget to a site in Muse design.

  2. I clicked the trigger and went to the muse toolbar to select the hyperlink, and then I added the desired link.

  3. the 'hover' finger appears, but clicking on does nothing.

  I checked the layers and to ensure that nothing is blocking the trigger, everything seems normal. I use it in such a way that there is no?

  It's possible!

  For example, use the widget with a trigger tool tip: place a (supplied with a hyperlink) element 'in' relaxation.

  If you ride on the shutter button, the ToolTip is displayed, if you click, the link is opened.

  Here you end has an example file:

  https://DL.dropboxusercontent.com/u/7046655/sample2.zip

• ToolTip Widget

  I have several lines of miniature images that I applied the widget ToolTip too. The problem I have is that 'pop-up' windows are appearing behind the lines of the images rather than above them. Any tips?

  Hello

  Please check in the properties of Widget (small white arrow in a blue circle in the upper right corner of the widget) If you have triggers on the top of the page option checked.

  If so, please uncheck and see if it helps.

  Kind regards

  Sachin

• Remove the lower panel of application (touchscreen devices)

  Hello

  I want to remove the Panel from the bottom (in red) of the application screen. It appears when I extend screen.

  How can I do?

  Also I have complex available on my screen and scrolling works incorrecly (it is always scroll to the top of the screen) when I press any button on the Panel.

  

  It is a known problem on the 4.7 9530 Simulator. The system tool bar will not be displayed on the device.

• ToolTip Widget questions

  

  I've got 4 widgets tool tip that I use on a Web site. Currently, in order to view the second window you have the mouse on the button to the right, and then to close, you have to mouse over the button to the left.

  I wish I could just mouse over the box above and have the second show of the window, and when you mouse away was the second area of loved ones, and the first box remains as it is.

  Is there a way to do this?

  Thank you

  Megan

  Logo moves, because your code looks at the zoom level of the page... IE, zoom out = moves to the right

  Popups are defined on the trigger (in this case, a small point)... I suggest the trigger on the image so that the popup moves on working capital and spread.

  

  p.s. that's a bad layout with side by side as they cover each other when they pop up and I would under the other... also a value of fixing of the screen from the top so that people can scroll through the.

• No option overlay for the ToolTip widget?

  It seems that there is no way to change order of overlap between different triggers and targets.

  I am trying to create a simple timeline in which I use the widget tool tip to reveal more info on historical figures. Triggers are the names of historical figures, and their areas of target text reveal more information about themselves on the passage of the mouse.

  The background screenshot shows the first person information popup box, but you will notice the problem with overlay - the popup is behind the trigger for the 2nd person. I looked in the layers panel - it allows me to rearrange the layers so that the target area is above the 2nd trigger. Is it possible to fix this?

  I don't want to make invisible triggers with the names and boxes of separate Visual elements (which could fix) - because they work together as buttons with different States.

  Help, please.

  Cobus

  

  In your properties of composition to ensure that "triggers on Top" is NOT checked.

  

• Sets the ToolTip widget to the width of 100% is not possible?

  This is quite annoying, because I put my navigation bar in a ToolTip. And I want to be both hideable and browserfilling (in width).
  Everyone knows about this problem? And maybe a solution / workaround for it?

  Thanks in advance!

  Since your navigation is pinned, you could just arbitrarily large, and he won't have a horizontal scroll bar appears.

• Widget ToolTip not showing picture as part of the image after image link

  problem loading image in the ToolTip widget. Image shows only in the drop-down list after related never replaces the default image.  The image shows so tied up in other parts of the widget as the text block, anyone else having this problem?

  Hi Renee

  You must choose the same image in the active panel that is selected on the page.

  http://screencasts.worldsecuresystems.com/SANJU/Screencast_12-30_13-04-2014.MP4

  Thank you

  Sanjit

• Fullscree widget with ToolTip?

  Can I integrate ToolTip widget within the widget fullscreen? so on that each image does not appear with tootip but where I want be displayed? or how can I load a different image on full screen thumbnail and a different image on the display area?

  Hello

  Yes, you can insert the composition of ToolTip on the page with the slideshow full screen, or you can use the full screen in a master and then insert the ToolTip on the subpage.

  It is not possible to have the thumbnails different image of the image target with slide show, but this can be achieved by using the composition.

  Thank you

  Sanjit

• Can the ToolTip + display Lightbox widgets be together?

  Hi, I am trying to insert a ToolTip widget in the action of the Lightbox display widget button, is it possible?

  I know that you can insert the balloon inside the Lightbox display widget, but what I need is something like a hyperlink, the ScreenTip for the Lightbox display widget.  The final effect I want to achieve is that the effect of the ToolTip widget overview shows one image and if the ToolTip is click it, and then display the Lightbox widget.

  No idea or help will appreciate.

  -Javier

  Hi Kandorean,

  You can achieve this effect by changing just the thumbnail jQuery rollover State.

  Please try this and if you are looking for a different output and this doesnot serves then please provide us with an example or the screenshot of what you want to achieve and we would try to find out if that can be achieved in MUSE.

  Kind regards

  Fox