Toshiba 32 '' Regza 32XV55DB - black screen

Similar Questions

• Toshiba Satellite A215-A4757 black screen and unable to initialize

  Received the black screen after trying to download the update of the BIOS; has been logged in as administrator, but received the error 'need to be logged in as an administrator. Could not go further. Process had not begun restore point then minimized and tried to validate the connection as an administrator. Locked screen and got a black screen with errors about bad driver. Doesn't seem to be valid. In any case, I liquidated - power off. Does not power on f11 or any other key - cannot start. Keyboard seems dead. seeing lights to drive DVD could perhaps start with the startup disk. However, do not have (not too smart). Is there a way to get a system of information-based boot disk? I had a previous assignment but did not because months ago. Thanks for any help/suggestions.

  Perhaps your message to: http://forums.toshiba.com/?

• Toshiba A60 starts not (black screen, no BIOS, no HARD disk)

  Please help me, there is no toshiba dealer in my country and my laptop has not started; I don't know what to do.

  Hi, Naj,

  You simply turn on one day and it did not? Not even (In Touch With tomorrow + Intel Inside) Welcome screen appear? What indicators (battery, HARD/CD/DVD disc, power) and the light around the button? I'm curious because you did not say much.

  András

• black screen when hdmi cable is connected

  I installed windows 7 and I'm having a problem with the hdmi. Whenever I connect my hdmi cable to my laptop, my screen goes black and freezes. It does not allow me to do anything, even if I unplug the hdmi cable. I've never had a problem with hdmi running windows vista. I use a laptop x 305 - Q701 Qosmio. I already tried to install the nvidia drivers new and old... it does not work. I also installed the hdmi control center provided with my laptop but nothing. Can anyone help me please with the question. I love everything about Windows 7, but this.

  Try pressing alt + F5

  I get this on my computer toshiba laptop when the black screen will just press alt + F5

• Access to Toshiba Virtual Store - black screen appears

  I'm on a Toshiba Journal.E Touch, model pX1530U-1ET1

  I have just updated the firmware as described in this link http://aps2.toshiba-tro.de/kb0/OPT0502VS0000R01.htm

  However, I can't go to the online store of Toshiba.
  When I try, just a black screen, with the words: "impressum 70.jt1.c" on the lower left side and also arrows, etc., and the little house on the right down side hand. But if I press the arrows, nothing happen. I'll be very grateful if you can help!

  Also: you will prepare a request to youtube that works? I'm pretty happy with my Toshiba, I hope that you will continue to support for it!

  > Also: you will prepare a request to youtube that works? I'm pretty happy with my Toshiba, I hope that you will continue to support for it!

  * + Q: * I had problems using JOURN. E TOUCH YouTube app. How can I solve them? +

  * + A: * Unfortunately, YouTube has changed its software architecture. JOURN. E TOUCH application uses old. We investigate the problem and as soon as we can, we provide you with an update of application that will solve the problem. +

  http://www.toshibatouch.EU/journe_touch_wince/FAQs.php

• Black screen on boot - Toshiba Satellite M70

  Hi all

  I have Toshiba Satellite M70, I need help, and I will describe my problem:

  -A few days my screen went black all of a sudden, I don't know how do I was away from the laptop.
  -Until yesterday, when I start my laptop, it gives me the black screen all the time but when I put to sleep by closing the laptop for a few seconds and then I click the button, my screen starts showing very well until my next restart and I do it again (I usually keep my laptop running almost 18 hours) which means that there is a lot of time on my next boot)
  -But today I started too many times, it gives me the black screen and the sleep mode no longer works. But several times today when I tried to start, the display shows the Toshiba screen for only 1 second then black alley again.

  PS You can see almost threw the black screen just if there is a Sun facing the laptop.

  Thank you in advance,
  Best regards
  Mr. Mher Krikorian

  > You can see almost threw the black screen just if there is a Sun facing the laptop
  This is very useful information
  I think that the problem is related to the FL inverter
  FL-converter is a small part that controls the backlight of the display.
  If this part starts to malfunction so you would see everything as behind a thick fog

  In my view the FL inverter must be checked and replaced if necessary
  This, to get in touch with a local service technician

  Welcome & happy new year!

• Satellite A200 - after Toshiba screen black screen

  Hey, I recently had a problem with my Toshiba laptop where, after the screen shows "Toshiba leading innovation", my laptop screen becomes black.
  I have manged to find the problem is one of my hard drives, and I am asuming this is drive C as the laptop does not start. If anyone has any information on what can be wrong, ways to fix it and the possible costs in setting priority, can you help me please?

  also... What are the chance I'll lose my files ect. off the drive?

  Thank you

  Hello

  As far as I know, second HARD drive has nothing to do with the boot and he's here for the backup data.
  You can remove it, but also be able to boot OS if everything is OK.

  Can you please set BIOS to default settings and use F8 at startup?
  You can enter advanced startup options?

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Black screen after update Windows 10 in Toshiba laptop

  * Original title: Windows 7

  Hello, so I opened my Toshiba laptop and it led me directly to the black screen that says (look at the picture) and I was wondering what I should do to solve the problem because it led me straight to here. Please help as soon as POSSIBLE. "PS I tried inserting a blank disc.

  Sounds like your hard drive has met its end (average life of a spinning hard drive is a little more than 5 years, but many die prematurely, especially in laptops that move).

  If you do not know that all of the cables and connections are secure on the disc, then it's probably time to buy a new hard drive to put.

• Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

  Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

  Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

  Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

  I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

  I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

  I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Won't boot NB205 - black screen and white flashing underscore

  My toshiba nb205 won't start...
  Its shows a black screen with flashing white underscore in the top left...

  What should I do?
  The operating system is bad? Bad hard drive?
  Bad motherboard?

  Please help thanks guys.

  Hello

  I can't give you a precise answer.
  Restart your laptop and enter the BIOS settings.
  Disk recognized and listed correctly?

• Black screen on startup of the Satellite NB10-A-10V

  Hello

  I just bought a new computer toshiba laptop satellite NB10-A-10V but I hate windows 8.1 and I tried to install ubuntu 14.04.

  Now when I start my laptop replaced black screen toshiba logo and any key worked (F12, delete, escape)
  So, how can I manage this problem? Why, toshiba does not or blocked an OS other than windows 8.1?
  I called support and they told me that it is 70 euros for it. It's almost a flight!

  So I think it's a good laptop and I just want to use it with ubuntu, I don't see where is the problem.

  Otherwise I'll fix it in a store of this kind of question, and I will never buy another toshiba in my future.

  So, if you can find a solution (for free, 300 euros already for the laptop 4 days ago only.) it will be very cool

  Thank you

  Hello

  Usually after the purchase of a new product, new owner should read paper textbooks s user initially. It is described that original preinstalled recovery image (original version of Windows) is saved on the HARD drive, and each new owner, before you start to do some experiments or install anything else should create recovery media. It can be DVD or USB, depending on the model of the machine.
  You created the recovery media?

  Very important, is that Toshiba does not support Linux, but in general, you can do with your machine all you want. No you don't have to use the version preinstalled Windows. Many people use Win7 or Linux on various models of Toshiba. Due to this Toshiba has created the separate category of Linux on this forum where you can exchange information and experience with other users of the forum.

  I must also say that you are mistaken if you think that Toshiba is blocking something. That s certainly wrong. When you stop preinstalled Win8 completely, you will be able to enter the BIOS settings and change the MODE to BOOT. After doing this, you can install anything you want.

  More info on what you can read on http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

  For more questions on Linux on Toshiba laptops I recommend you to visit category Linux SOFTWARE and OPERATING SYSTEM.

  Good luck

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• Black screen on startup of the satellite Pro M30

  Hello

  Sometimes, I have the problem that my laptop starts up with a black screen. What will happen is that the Red Toshiba logo comes up first, but before you get the loading Windows screen screen will turn black and will cease any activity hard drive and cdrom. The laptop will then just stay there until I have manually turn it works again.

  I was not yet able to determine exactly in what circumstances sometimes, when starting, sometimes when you restart it.

  After that I restart the Windows laptop then tell me he could not start properly and ask me for the etc SafeMode. That's why I first concluded that it could be a Windows problem, but after using the recovery dvd twice I think I can exclude.

  One of my colleagues noticed something on what may be a problem with the video card do not load or commissioning, which doesn't seem likely?

  Any ideas?

  Hi robc,.

  very good and detailed describtion!

  In my opinion the graphics card work properly because otherwise the Toshiba logo have not been shown.

  So I think that failure is perhaps a bad connection of the IDE cable, but to know definitely you should bring a short verification to a Toshiba Service partner!

  I think that your M30 Satellite Pro is still under warranty

  Antoni Bye